Ammonia (NH3) is a promising carbon-free fuel for internal combustion engines, but its low reactivity and poor ignition properties present significant challenges for stable operation. This study presents the development and experimental validation of a spark-ignited combustion process that enables stable engine operation using 100% liquid NH3 as a single fuel. A modified single cylinder research engine, equipped with NH3 port fuel injection and a high-energy capacitive ignition system was used to investigate combustion behavior under various load conditions. The results show that stable, knock-free combustion with pure NH3 is feasible at every operating point without any ignition aids like diesel fuel or hydrogen (H2). The full load conditions of a diesel engine can be represented with an indicated efficiency of 50% using this combustion process. The emission measurements show nitrogen oxides (NOx) and NH3 emissions in a 1:1 ratio, which is advantageous for a passive SCR system. Increased nitrous oxides (N2O) formation occurs at low loads and cold combustion chamber temperatures. This work demonstrates the technical viability of carbon-free NH3 combustion in spark-ignited (SI) engines and represents a promising step towards net-zero combustion.
To determine the timing of inflammation in gas and gasoline combustion engines, the point of 10% mass fraction conversion of fuel (MFB10) is commonly used. The MFB10 can be determined from the heating curve, which in turn is calculated from the in-cylinder pressure curve. However, the cylinder pressure is an indirect parameter with regard to inflammation, as it is the result of the combustion that follows the inflammation. An attempt is made to derive a new, direct parameter of inflammation based on optical measurements in order to detect inflammation more rapidly and accurately. The background-oriented Schlieren technique (BOS) in combination with high-magnification optics and a high-speed camera is used to detect local density changes coming from the particle wave around the ignition kernel of a hydrogen combustion inside a combustion chamber. Via BOS and regular high-magnification high-speed imaging, the influence of ignition coil dwell time and in-cylinder pressure on the spark phases and the inflammation itself are evaluated. As a potential direct parameter for inflammation, the size of the particle wave resulting from the expanding ignition kernel is evaluated. It was found that a higher coil energy supports a faster propagation of the particle wave at ambient pressure. At higher pressures, general combustion effects override the effect of the influence of the coil energy on the propagation speed of the particle wave. In addition, the presence of successful inflammation was found to influence the spark phases. A directly measurable parameter for ignition could be found at a basic level, which will serve as a starting point for further detailed investigations.
Auf dem Weg zu einer klimaneutralen Mobilität können Wasserstoffmotoren vor allem im Bereich der Nutzfahrzeuge einen entscheidenden Beitrag leisten. Die Basistechnologie der Motoren ist bereits vorhanden und kann durch geringe Modifikationen angepasst werden. Der vorliegende Artikel beschreibt Trends bei der Wasserstoffmotorenentwicklung und wie deren Herausforderungen gemeistert werden können. Neben Aspekten der Infrastruktur und des Gesamtfahrzeugkonzepts stehen vor allem die Punkte Gemischbildung, Verbrennung und Emissionen im Fokus.