Jhon Pabón León

Prof. Jhon Pabón León

Docente

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 April 2022 in Lubricants
Verified
Journal Article
Open access
PDF file
CGCarlos Eduardo Pardo García
Carlos Eduardo Pardo García
SASofia Orjuela Abril
Sofia Orjuela Abril
JLJhon Pabón León
Jhon Pabón León
Hydrogen is considered one of the main gaseous fuels due to its ability to improve thermal performance in diesel engines. However, its influence on the characteristics of lubricating oil is generally ignored. Thus, in the present investigation, an analysis of the effect on the physical and chemical properties of lubricating oil with mixtures of diesel fuel–hydrogen was carried out, and the environmental impacts of this type of mixture were assessed. The development of the research was carried out using a diesel engine under four torque conditions (80 Nm, 120 Nm, 160 Nm and 200 Nm) and three hydrogen gas flow conditions (0.75 lpm, 1.00 lpm and 1.25 lpm). From the results, it was possible to demonstrate that the presence of hydrogen caused decreases of 3.50%, 6.79% and 4.42% in the emissions of CO, HC, and smoke opacity, respectively. However, hydrogen further decreased the viscosity of the lubricating oil by 26%. Additionally, hydrogen gas produced increases of 17.7%, 29.27%, 21.95% and 27.41% in metallic components, such as Fe, Cu, Al and Cr, respectively. In general, hydrogen favors the contamination and oxidation of lubricating oil, which implies a greater wear of the engine components. Due to the significantly negative impact of hydrogen on the lubrication system, it should be considered due to its influence on the economic and environmental cost during the engine’s life cycle.

2 March 2021 in Lubricants
Verified
Journal Article
Open access
PDF file
Brando HernándezBrando Hernández
Brando Hernández
Daniel Maestre-CambronelDaniel Maestre-Cambronel
Daniel Maestre-Cambronel
CGCarlos Eduardo Pardo García
Carlos Eduardo Pardo García
MFMarlen Del Socorro Fonseca-Vigoya
Marlen Del Socorro Fonseca-Vigoya
JLJhon Pabón León
Jhon Pabón León
Internal combustion engines are widely implemented in several applications; however, they still face significant challenges due to the sealing capacity of the compression rings. Gas leakage through the crankcase, also known as blow-by, directly impacts power losses, overall efficiency, and global emissions. Therefore, the present study investigates the influence of parameters such as the ring gap, ring masses, and twist angle of the compression rings on the sealing capacity of the combustion chamber. A mathematical model is proposed to account for geometric, dynamic, and operational characteristics in a single-cylinder diesel engine. The results indicated that the greatest gas losses to the crankcase occur during the compression and combustion stages as a consequence of extreme pressure conditions. Specifically, at least 0.5% of the gases locked in the combustion chamber are released on each cycle, while increasing the mass of the compression rings boosts the gas leakage due to higher inertial forces in the rings. In contrast, a positive twist angle of the compression rings reduced the combustion gases leakage by 7.33×10−5 g/cycle. Additionally, a combined reduction in the gap of both compression rings minimized the leakage flows by 37%. In conclusion, the proposed model served as a robust tool to evaluate different parameters on the sealing capacity of the combustion chamber that contribute to minimizing global emissions. Secondary piston motion and ring distortion represent significant opportunities in future studies.

5 November 2021 in Revista Universidad Y Empresa
Verified
Journal Article
Open access
PDF file
JRJulio Cesar Silva Rincon
Julio Cesar Silva Rincon
JLJhon Pabón León
Jhon Pabón León
EMEnder José Barrientos Monsalve
Ender José Barrientos Monsalve
The purpose of this work is to perform a systematic review and a bibliometric analysis of publications on regional development and sustainability, two increasingly important concepts in economic, environmental, social, and academic forums in all world countries. The study was carried out under the concept of scientific mapping, using bibliometrics to observe the interrelations between disciplines, fields, professions, or documents. The study was done in two stages: a bibliometric analysis and a network analysis. First, a WoS search was performed, and bibliometric indicators were reviewed. In the second step, the network was constructed through the analysis ofco-citations, which were compared with the similarity tree. These documents are divided into three categories: the root of the source document (called hegemonic or classic); the backbone of the document involved in the development of the current knowledge of the subject called trunk or structural; the last one is the collection of the latest developments called leaves or perspectives of the document work. Finally, three perspectives identified in the following research fields are presented: planning and territorial development, evaluation and ecosystems, and China and urban development. El propósito de este trabajo es realizar una revisión sistemática y análisis bibliométrico de publicaciones sobre el desarrollo regional y la sostenibilidad, dos conceptos cada vez más importantes en los foros económicos, ambientales, sociales y académicos de todos los países del mundo. Se realiza bajo el concepto de cartografía científica, utilizando la bibliometría para observar las interrelaciones entre disciplinas, campos, profesiones o documentos. Para esto, se desarrollaron dos etapas: análisis bibliométrico y análisis de redes. Primero, se llevó a cabo una búsqueda WoS y se revisaron los indicadores bibliométricos. En el segundo paso, con la información y las referencias bibliográficas del primer paso, se construye la red a través del análisis de las cocitaciones, comparado con la similitud del árbol. Estos documentos se dividen en tres categorías: la raíz del documento fuente (denominados hegemónicos o clásicos); la columna vertebral del documento involucrado en el desarrollo del conocimiento actual de la materia (denominados tronco o estructurales); y la recopilación de las últimas novedades (denominadas hojas o perspectivas de trabajo del documento). Finalmente, se presentan tres perspectivas identificadas en los siguientes campos de la investigación: planeación y desarrollo territorial; evaluación y ecosistemas; China y el urbanismo. O objetivo deste trabalho é realizar uma revisão sistemática e análise bibliométrica de publicações sobre desenvolvimento regional e sustentabilidade, dois conceitos cada vez mais importantes em fóruns econômicos, ambientais, sociais e acadêmicos em todos os países do mundo. É realizado sob o conceito de cartografia científica, utilizando a bibliometria para observar as inter-relações entre disciplinas, campos, profissões ou documentos. Para isso,foram desenvolvidas duas etapas: análise bibliométrica e análise de redes. Primeiramente, uma pesquisa WoS foi realizada e indicadores bibliométricos foram revisados. Na segunda etapa, com as informações e referências bibliográficas da primeira etapa, a rede é construída por meio da análise das cocitações, comparada com a semelhança a uma árvore. Esses documentos são divididos em três categorias: a raiz do documento fonte (denominada hegemônica e/ou clássicas); a espinha dorsal do documento envolvida no desenvolvimento do conhecimento atual do assunto denominado tronco e/ou estruturais; e a última é a compilação das últimas novidades denominadas folhas ou perspectivas de trabalho do documento. Por fim, são apresentadas três perspectivas identificadas nos seguintes campos de pesquisa: planejamento e desenvolvimento territorial; avaliação e ecossistemas; China e o Urbanismo.

28 November 2021 in Lubricants
Verified
Journal Article
Open access
PDF file
WLWilman Orozco Lozano
Wilman Orozco Lozano
MFMarlen Del Socorro Fonseca-Vigoya
Marlen Del Socorro Fonseca-Vigoya
JLJhon Pabón León
Jhon Pabón León
The present research aims to analyze the kinematic and dynamic behavior of the piston ring package. The development of the research was carried out through the development of numerical simulation by means of CFD. The analysis involves the three piston rings for the development of simulations that are closer to the real conditions of the engine since most of the investigations tend to focus on the study of the compression ring only. The simulation was reinforced by the incorporation of mathematical models, which allow determining the piston kinematics, the lubrication properties as a function of temperature, contact friction, and gas leakage. For the simulation, the CAD of the piston and the connecting rod—crankshaft mechanism was carried out, taking as a reference the geometry of a diesel engine. From the results obtained, it was possible to show that the first ring exhibits considerably greater radial and axial movement compared to the second and third piston rings. Additionally, it was shown that the first and second rings tend to maintain a negative tilt angle throughout the combustion cycle, which facilitates the advancement of the combustion gases over the piston grooves. Therefore, it is necessary to use strategies so that these rings tend to maintain a positive inclination. The analysis of the pressure conditions in the second ring are 150% and 480% higher compared to the conditions present in the third ring. Due to the above, it is necessary to focus efforts on the design of the profile of this ring. The study of energy losses showed that the combination of leakage gases and friction are responsible for a mechanical loss between 6–16%. In general, the development of the proposed methodology is a novel tool for the joint analysis of the kinematic characteristics, pressure conditions, and energy losses. In this way, integrated analysis of changes caused by piston ring designs is possible.

18 February 2021 in Lubricants
Verified
Journal Article
Open access
PDF file
SASofia Orjuela Abril
Sofia Orjuela Abril
CGCarlos Eduardo Pardo García
Carlos Eduardo Pardo García
JLJhon Pabón León
Jhon Pabón León
Currently, internal combustion engines contribute to the problem of global warming due to their need to use products derived from fossil resources. To mitigate the above problem, this study proposes the use of coatings on the cylinder bore in order to reduce fuel consumption and polluting emissions. Therefore, in the present study a numerical model is developed in which the tribological behavior, heat fluxes, and leakage of the combustion gases in the chamber are considered to evaluate the influence of the coating. Nickel nanocomposite (NNC) and diamond-like carbon (DLC) coatings are considered in the study. The results demonstrate that the NNC coating produces a 32% reduction in the total friction force of the compression ring. The estimated maximum temperatures for the lubricating oil were 214, 202, and 194 °C for the DLC, steel, and NNC materials. Increasing the temperature in the DLC coating can cause a reduction in the tribological performance of the lubricant. The estimates made show that the implementation of the NNC coating allows a maximum reduction of 5.28 ton of fuel and 39.30 kg of CO emissions, which are based on the global fleet of diesel engines forecast for the year 2025 (corresponding to one hundred and eighty million engines) and a test time of 1800 s. The proposed numerical model allows future analyses to be carried out for other types of materials used as coatings. Additionally, the model can be expanded and adapted to consider other systems that involve friction processes in the engine.

7 April 2022 in Lubricants
Verified
Journal Article
Open access
PDF file
SASofia Orjuela Abril
Sofia Orjuela Abril
MFMarlen Del Socorro Fonseca-Vigoya
Marlen Del Socorro Fonseca-Vigoya
JLJhon Pabón León
Jhon Pabón León
The contact between the piston rings and the cylinder liner is an interface with a strong influence on the tribological behavior and, therefore, directly affects the useful life of the engine components and fuel consumption. Due to this importance, the present investigation carried out an analysis of the effects of dimples and the honing groove in the cylinder liner on the tribological characteristics. A tribological model was developed to study the friction forces, minimum film thickness, and friction coefficient for the present investigation. Similarly, a computational fluid dynamics model was built to determine the dynamic movement of the piston. The validation of the numerical model showed a close similarity with the real behavior of the engine, obtaining an average relative error of 14%. The analysis of the results showed that a 3% increase in dimples’ density leads to a 3.79% increase in the minimum lubricant film and a 2.76% decrease in friction force. Additionally, it was shown that doubling the radius and depth of the dimple produces an increase of 3.86% and 1.91% in the thickness of the lubrication film. The most suitable distribution of the dimples on the surface of the cylinder liner corresponds to a square array. In general, the application of dimples and honing grooves in the cylinder liner are promising alternatives to reduce energy losses and minimize wear of engine components.