The development of microbial fuel cells based on electro-catalytic processes is among the novel topics, which are recently emerging in the sustainable development of energetic systems. Microbial fuel cells have emerged as unique biocatalytic systems, which transform the chemical energy accumulated in renewable organic fuels and at the same time reduce pollution from hazardous organic compounds. However, not all microorganisms involved in metabolic/catalytic processes generate sufficient redox potential. In this research, we have assessed the applicability of the microorganism Rhizobium anhuiense as a catalyst suitable for the design of microbial fuel cells. To improve the charge transfer, several redox mediators were tested, namely menadione, riboflavin, and 9,10-phenanthrenequinone (PQ). The best performance was determined for a Rhizobium anhuiense-based bio-anode mediated by menadione with a 0.385 mV open circuit potential and 5.5 μW/cm² maximal power density at 0.35 mV, which generated 50 μA/cm² anode current at the same potential.

In this study we examined the influence of ultra-small gold and magnetite‑gold nanoparticles (NPs) stabilized with d,l-methionine, Fe₃O₄@Au@Met, on their antibacterial efficacy against three of twelve the worst bacterial family members included in the World Health Organization (WHO) list. In particular, gram-negative Acinetobacter baumannii, Salmonella enterica and gram-positive methicillin-resistant Staphylococcus aureus and Micrococcus luteus were tested. Apart from the synthesis, gold species reduction and NP stabilization, an excess of methionine has been used herein to detach ultra-small gold NPs from the Fe₃O₄@Au@Met surface, collect them and investigate. The antimicrobial efficiency of the ultra-small (Ø ~ 1.8 nm) Au@Met NPs and Fe₃O₄@Au@Met NPs was evaluated through the quantitative analysis by comparing with that of naked magnetite NPs, d,l-Met and BSA. It has been determined that compared with the control sample, 70 mg L^-1 probe of Au@Met NPs exhibited the killing efficiency of 84.4-58.5% against gram-negative bacteria and 89.1-75.7% against gram-positive bacteria. The composition, structure, and morphology of the synthesized and tested herein NPs were investigated by inductively coupled plasma optical emission spectrometry, magnetic measurements, FTIR, XRD, XPS, AFM and HRTEM.

In this study, the nitrogen-fixing, Gram-negative soil bacteria Rhizobium anhuiense was successfully utilized as the main biocatalyst in a bacteria-based microbial fuel cell (MFC) device. This research investigates the double-chambered, H-type R. anhuiense-based MFC that was operated in modified Norris medium (pH = 7) under ambient conditions using potassium ferricyanide as an electron acceptor in the cathodic compartment. The designed MFC exhibited an open-circuit voltage (OCV) of 635 mV and a power output of 1.07 mW m⁻² with its maximum power registered at 245 mV. These values were further enhanced by re-feeding the anode bath with 25 mM glucose, which has been utilized herein as the main carbon source. This substrate addition led to better performance of the constructed MFC with a power output of 2.59 mW m⁻² estimated at an operating voltage of 281 mV. The R. anhuiense-based MFC was further developed by improving the charge transfer through the bacterial cell membrane by applying 2-methyl-1,4-naphthoquinone (menadione, MD) as a soluble redox mediator. The MD-mediated MFC device showed better performance, resulting in a slightly higher OCV value of 683 mV and an almost five-fold increase in power density to 4.93 mW cm⁻². The influence of different concentrations of MD on the viability of R. anhuiense bacteria was investigated by estimating the optical density at 600 nm (OD₆₀₀) and comparing the obtained results with the control aliquot. The results show that lower concentrations of MD, ranging from 1 to 10 μM, can be successfully used in an anode compartment in which R. anhuiense bacteria cells remain viable and act as a main biocatalyst for MFC applications.

Gene delivery by the pulsed electric field is a promising alternative technology for nonviral transfection; however, the application of short pulses (i.e., nanosecond) is extremely limited. In this work, we aimed to show the capability to improve gene delivery using MHz frequency bursts of nanosecond pulses and characterize the potential use of gold nanoparticles (AuNPs: 9, 13, 14, and 22 nm) in this context. We have used bursts of MHz pulses 3/5/7 kV/cm × 300 ns × 100 and compared the efficacy of the parametric protocols to conventional microsecond protocols (100 µs × 8, 1 Hz) separately and in combination with nanoparticles. Furthermore, the effects of pulses and AuNPs on the generation of reactive oxygen species (ROS) were analyzed. It was shown that gene delivery using microsecond protocols could be significantly improved with AuNPs; however, the efficacy is strongly dependent on the surface charge of AuNPs and their size. The capability of local field amplification using AuNPs was also confirmed by finite element method simulation. Finally, it was shown that AuNPs are not effective with nanosecond protocols. However, MHz protocols are still competitive in the context of gene delivery, resulting in low ROS generation, preserved viability, and easier procedure to trigger comparable efficacy.

In this study, conditions for the fabrication of extremely thin and flexible anodic films decorated with silver nanowire arrays by alternating current treatments for the finishing of high purity and commercial aluminium foils were developed. For characterization of these porous films with a thickness of ≤1.0 μm and encased silver species, inductively coupled plasma optical emission spectroscopy, X-ray diffraction and field emission scanning electron microscopy were used. Variable angle spectroscopic ellipsometry in the wavelength range of 200–1700 nm was also used to determine the influence of the deposited Ag content and the film thickness on the optical constants (n, k) of the fabricated alumina films. It is shown that due to surprisingly low k values of nano-Ag-in-alumina films in the visible and near IR regions these films could be applied as transparent films with an extremely low refractive index. In addition, the antimicrobial activity of the obtained films was assessed for the as-deposited and fully-encapsulated silver nanowire arrays against several widespread fungi and bacteria. The results obtained from in vitro tests indicated that the as-formed Ag-in-alumina films containing ≥19 μg cm⁻² of silver possessed antimicrobial properties and could be promising as foodstuff packaging materials.