This article presents the description of the mechanism of selected dysfunctions of the human skeletal system and internal organs. The problem is wide and requires extensive experimental and numerical research. This article presents the outline of the problem regarding the creation of personal injuries of soldiers inside armored vehicles. The explanation of the mechanism of injuries caused as a result of strong effects of pulse forces, resulting from both the consequences of the wave of pressure created during an explosion, as well as high accelerations of the vehicle’s hull, is presented herein. Examples of the results of numerical analyses of the pressure wave impact from an explosion are presented in the Article. LS-Dyna software was used to perform the numerical calculations. The analyses were carried out using the Conwep algorithm implemented in the calculation code. The significance of calculation methods, thanks to which it is possible to recreate a simulation in which there is a risk of injuries of soldiers without posing a threat to their health and life, should be noted here. The main parts of the human body, such as the bottom limb, the pelvic belt, the cervical spine and the abdomen, have been considered. Mechanisms causing typical injuries of soldiers inside vehicles under which explosives are detonated have been analyzed for particular body parts through multiple numerical simulations. The analysis of the process of injury creation has been conducted on the basis of the statistical data regarding the most common injuries of soldiers. The validation process of numerical analyses was carried out using the results of experimental research.

Currently, shaped charges are widely used in many fields of science and industry. Due to the high efficiency of piercing materials with high strength and hardness, shaped charges are commonly used in mining, military and for structural damage. The main application area of shaped charges is the military industry, where they are used in missiles with warheads (torpedoes, rocket launchers) and for piercing vehicle armor or bunker walls. When analyzing the existing solutions of shaped charges, one can find many typical solutions designed for specific applications. However, there are no universal constructions which, after appropriate regulation, will fulfil their role in a wide range of applications. The subject of this article is a new solution for a shaped charge that is characterized by compact dimensions and a short preparation time. This article presents the results of experimental research and the numerical analyses of such a charge.

The aim of this study is the analysis of the multiple pelvis fracture mechanism in side-impact dynamic load cases. The elaborated numerical model of a pelvis complex includes pelvic and sacral bones as well as soft tissues such as ligaments and cartilages. The bone has been modelled as a viscoelasticity material based on the Johnson–Cook model. The model parameters have been chosen based on the experimental data. The uniqueness of a presented approach refers to the selection of crack criteria for the bone. Thus, it was allowed to analyse the process of multiple fractures inside the pelvic bones. The analysis was evaluated for the model in which the deformation rate influences the bone material properties. As a result, the stress distributions inside particular bones were changed. It has been estimated that the results can vary by 50% or even more depending on the type of boundary conditions adopted. The second step of work was a numerical analysis of military vehicle subjected to an IED. An analysis of the impactor’s impact on the pelvis of the Hybrid ES-2RE mannequin was conducted. It was shown that the force in the pelvis exceeds the critical value by a factor of 10. The results of the numerical analysis were then used to validate the model of a military vehicle with a soldier. It was shown that for the adopted loading conditions, the critical value of the force in the pelvis was not exceeded.