We report the high-frequency modulation of individual pixels in 8 × 8 arrays of III-nitride-based micro-pixellated light-emitting diodes, where the pixels within the array range from 14 to 84 μ m in diameter. The peak emission wavelengths of the devices are 370, 405, 450 and 520 nm, respectively. Smaller area micro-LED pixels generally exhibit higher modulation bandwidths than their larger area counterparts, which is attributed to their ability to be driven at higher current densities. The highest optical -3 dB modulation bandwidths from these devices are shown to be in excess of 400 MHz, which, to our knowledge, are the highest bandwidths yet reported for GaN LEDs. These devices are also integrated with a complementary metal-oxide-semiconductor (CMOS) driver array chip, allowing for simple computer control of individual micro-LED pixels. The bandwidth of the integrated micro-LED/CMOS pixels is shown to be up to 185 MHz; data transmission at bit rates up to 512 Mbit/s is demonstrated using on-off keying non return-to-zero modulation with a bit-error ratio of less than 1 × 10^-10, using a 450 nm-emitting 24 μm diameter CMOS-controlled micro-LED. As the CMOS chip allows for up to 16 independent data inputs, this device demonstrates the potential for multi-Gigabit/s parallel data transmission using CMOS-controlled micro-LEDs.

High-speed underwater optical wireless communication (UOWC) was achieved using an 80 μm blue-emitting GaN-based micro-LED. The micro-LED has a peak emission wavelength of ~440 nm and an underwater power attenuation of 1 dB/m in tap water. The −3 dB electrical-to-optical modulation bandwidth of the packaged micro-LED increases with increasing current and saturates at ~160 MHz. At an underwater distance of 0.6 m, 800 Mb/s data rate was achieved with a bit error rate (BER) of 1.3 × 10⁻³, below the forward error correction (FEC) criteria. And we obtained 100 Mb/s data communication speed with a received light output power of −40 dBm and a BER of 1.9 × 10⁻³, suggesting that UOWC with extended distance can be achieved. Through reflecting the light emission beam by mirrors within a water tank, we experimentally demonstrated a 200 Mb/s data rate with a BER of 3.0 × 10⁻⁶ at an underwater distance of 5.4 m.

This review covers the fundamentals, recent progress and state-of-the-art applications of optoelectronic tweezers technology, and demonstrates that optoelectronic tweezers technology is a versatile and powerful toolbox for nano-/micro-manipulation.

Significance: There is great interest in robotic systems that can substitute for humans and replicate human actions. “Microrobotics” describes robotic systems that have submillimeter (sub-mm) dimensions, which is becoming increasingly important for the manipulation and analysis of individual cells and groups of cells. Here we introduce the optoelectronic microrobot, a system in which projected patterns of light are applied to control electric fields. Specially designed microrobots respond to the fields, and can be programmed to move and “scoop up” mammalian cells or other sub-mm particles such that they can be isolated and evaluated independently. The technique is straightforward to implement, and we propose will find wide use for the ever-expanding list of applications that require micromanipulation of cells.

Displays based on microsized gallium nitride light-emitting diodes possess extraordinary brightness. It is demonstrated here both theoretically and experimentally that the layout of the n-contact in these devices is important for the best device performance. We highlight, in particular, the significance of a nonthermal increase of differential resistance upon multipixel operation. These findings underpin the realization of a blue microdisplay with a luminance of 10 ⁶ cd/m ² .

This review covers the working mechanisms, recent progress and state-of-the-art applications of microrobots driven by optical and magnetic fields.