This review covers the fundamentals, recent progress and state-of-the-art applications of optoelectronic tweezers technology, and demonstrates that optoelectronic tweezers technology is a versatile and powerful toolbox for nano-/micro-manipulation.

There is great interest in the development of micromotors which can convert energy to motion in sub-millimeter dimensions. Micromachines take the micromotor concept a step further, comprising complex systems in which multiple components work in concert to effectively realize complex mechanical tasks. Here we introduce light-driven micromotors and micromachines that rely on optoelectronic tweezers (OET). Using a circular micro-gear as a unit component, we demonstrate a range of new functionalities, including a touchless micro-feed-roller that allows the programming of precise three-dimensional particle trajectories, multi-component micro-gear trains that serve as torque- or velocity-amplifiers, and micro-rack-and-pinion systems that serve as microfluidic valves. These sophisticated systems suggest great potential for complex micromachines in the future, for application in microrobotics, micromanipulation, microfluidics, and beyond.

Electrical interconnects are becoming a bottleneck in the way towards meeting future performance requirements of integrated circuits. Moore’s law, which observes the doubling of the number of transistors in integrated circuits every couple of years, can no longer be maintained due to reaching a physical barrier for scaling down the transistor’s size lower than 5 nm. Heading towards multi-core and many-core chips, to mitigate such a barrier and maintain Moore’s law in the future, is the solution being pursued today. However, such distributed nature requires a large interconnect network that is found to consume more than 80% of the microprocessor power. Optical interconnects represent one of the viable future alternatives that can resolve many of the challenges faced by electrical interconnects. However, reaching a maturity level in optical interconnects that would allow for the transition from electrical to optical interconnects for intra-chip and inter-chip communication is still facing several challenges. A review study is required to compare the recent developments in the optical interconnects with the performance requirements needed to reach the required maturity level for the transition to happen. This review paper dissects the optical interconnect system into its components and explains the foundational concepts behind the various passive and active components along with the performance metrics. The performance of different types of on-chip lasers, grating and edge couplers, modulators, and photodetectors are compared. The potential of a slot waveguide is investigated as a new foundation since it allows for guiding and confining light into low index regions of a few tens of nanometers in cross-section. Additionally, it can be tuned to optimize transmissions over 90° bends. Hence, high-density opto-electronic integrated circuits with optical interconnects reaching the dimensions of their electrical counterparts are becoming a possibility. The latest complete optical interconnect systems realized so far are reviewed as well.

Optoelectronic tweezer (OET) is a useful optical micromanipulation technology that has been demonstrated for various applications in electrical engineering and most notably cell selection for biomedical engineering. In this work, we studied the use of light patterns with different shapes and thicknesses to manipulate dielectric microparticles with OET. It was demonstrated that the maximum velocities of the microparticles increase to a peak and then gradually decrease as the light pattern’s thickness increases. Numerical simulations were run to clarify the underlying physical mechanisms, and it was found that the observed phenomenon is due to the co-influence of horizontal and vertical dielectrophoresis forces related to the light pattern’s thickness. Further experiments were run on light patterns with different shapes and objects with different sizes and structures. The experimental results indicate that the physical mechanism elucidated in this research is an important one that applies to different light pattern shapes and different objects, which is useful for enabling users to optimize OET settings for future micromanipulation applications.