Norazila Othman

Norazila Othman


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 January 2023 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Verified
Journal Article
Open access
PDF file
RMRafiqi Daniel Ramadhan Mariaprakasam
Rafiqi Daniel Ramadhan Mariaprakasam
SMShabudin Mat
Shabudin Mat
PSPakharuddin Mohd Samin
Pakharuddin Mohd Samin
NONorazila Othman
Norazila Othman
MWMastura Ab Wahid
Mastura Ab Wahid
MSMazuriah Said
Mazuriah Said
Reducing aerodynamic drag in automobiles has been one of the focuses in automotive industry as it will increase vehicles performance and reduce power consumption which subsequently save the environment. Drag is a force that tend to pull the vehicle backwards. Pressure drag is the major contributor to drag of vehicle which caused by lower pressure in the rear area compared to front of vehicle. When vehicle moves forward, the stagnation point occurs in the front part of vehicle. The airflow then goes over the vehicle and separate at the back due to adverse pressure gradient. Thus, flow separation is created in the rear area of vehicle as indicated by the wake. Wake is a low-pressure region that need to be reduced so that the pressure between the front and rear could be reduced to minimize the drag. Flow control is introduced to delay this flow separation and it has been categorized as active and passive. Active flow controls require power input while passive flow controls do not need power input. This review article will explore those studies on flow controls applied in automobiles and investigate their working mechanisms along with research gaps detected. Relative comparison of effectiveness for each flow control is unfeasible as the parameters used differs but this problem can be resolved. Standard parameters need to be used in future researches in order address the discrepancy of results obtained from numerous studies around the globe. A current flow control technique is proposed to be conducted in UTM Aerolab to further investigate this interesting flow field.

6 July 2022 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Verified
Journal Article
Open access
PDF file
LHLeong Chee Hang
Leong Chee Hang
NRNur Athirah Nadwa Rosli
Nur Athirah Nadwa Rosli
MWMastura Ab Wahid
Mastura Ab Wahid
NONorazila Othman
Norazila Othman
SMShabudin Mat
Shabudin Mat
MZMohd Zarhamdy Md. Zain
Mohd Zarhamdy Md. Zain
The purpose of this study is to see the feasibility of using Computational Fluid Dynamic (CFD) analysis over wind tunnel testing for propeller performance measurement. Computational Fluid Dynamic (CFD) analysis is conducted on APC 6X4E propeller and 9X6E propeller at propeller disc angle, α of 0°, 30°, 60°, and 90° using commercially available software ANSYS FLUENT at advance ratio ranging from 0 to 0.88 and angular velocity ranging from 1000rpm to 8000rpm. CFD analysis was also performed for different advance ratio at different rotational speed of 4000rpm and 8000rpm. Multiple Reference Frame model is used to simulate the rotating propeller in a flowing airstream by constructing a rotating and static domain around the propeller. The non-zero propeller disc angle is achieved by changing the inlet direction of the static domain. The SST k-ω turbulence model is used, and tetrahedral mesh is constructed. The propeller thrust and torque obtained from the CFD simulation is used to calculate the aerodynamic characteristics of the propellers. The thrust coefficient, torque coefficient and propeller efficiency obtained for both propellers follow the trend of the wind tunnel testing. The results obtained from the CFD simulation matches with the results trend obtained by another researcher performing wind tunnel analysis, where the thrust coefficient decreases with increasing advance ratio at propeller disc angle less than 60° and increases with increasing advance ratio at propeller disc angle more than 70°. The error produce for thrust estimation is lower than 12% for both 6x4E and 9x6E propellers. The error for torque and efficiency estimation is between 15-30% and 12% respectively. In conclusion, CFD simulation can predict the aerodynamic characteristics of Low Reynolds Number propeller at different propeller disc angle.

30 March 2023 in Malaysian Journal of Catalysis
Verified
Journal Article
Open access
PDF file
AAAnis Athirah
Anis Athirah
NONorazila Othman
Norazila Othman
MJMohammad Nazri Mohd Jaafar
Mohammad Nazri Mohd Jaafar
Concerns on the depletion of fossil fuel and emissions of harmful gases lead to the search for alternative aviation fuel. The present study demonstrates the production of biokerosene hydrocarbons from coconut oil via solvent-free catalytic deoxygenation under inert Nitrogen (N2) atmosphere. The deoxygenated product is examined through Gas Chromatography-Mass Spectrometry (GC-MS) analysis to determine its chemical composition and hydrocarbons distribution. CoO-NiO/Kaolin catalyst was used along with several other catalysts to study the reactivity of different catalysts in catalytic deoxygenation. Coconut oil is composed of middle-chain saturated fatty acids (capric acid, lauric acid, and myristic acid) which are favorable for the conversion into biokerosene hydrocarbons due to their carbon chain length. In terms of the types of catalyst, CoO-NiO/Kaolin proves to be the best catalyst with optimum selectivity of biokerosene hydrocarbons at 83.4%. A parametric study was executed on coconut oil using CoO-NiO/Kaolin, and the result indicated that the optimum reaction conditions are 330 oC, 2 hours of reaction time, and 5 wt.% of catalyst. The biokerosene hydrocarbons produced have the likelihood to be the drop-in substitutes for aviation fuel.

29 February 2024 in ASEAN Engineering Journal
Verified
Journal Article
Open access
PDF file
MRMuhammad Roslan Rahim
Muhammad Roslan Rahim
ATAnnisa Palupi Trisasongko
Annisa Palupi Trisasongko
MWMastura Ab Wahid
Mastura Ab Wahid
NONorazila Othman
Norazila Othman
AAAlaa Salahuddin Araibi
Alaa Salahuddin Araibi
MSMazlan Said
Mazlan Said
Gasification technology has the potential to revolutionise the energy industry by providing a clean and efficient way to produce energy from a variety of raw materials. This technology have the ability to produce synthesis gas from raw materials based on negative or low carbon values such as high sulphur fuel oil, petroleum coke, coal, domestic wastes, industrial and biomass wastes. The gas produced from the process is used to replace natural gas, to generate electricity, or as a basic raw material to produce chemicals and liquid fuels. Gasification is a process that uses heat, pressure, and steam to convert substances directly into gases, such as carbon monoxide and hydrogen. Gasification technology has differences in various aspects but there are four engineering factors that are the core of the gasification system such as atmospheric gasification reactor (level of oxygen or air content), internal and external heating, reactor design and operating temperature. The raw material used, prepared and introduced in dry form and small particles to the reactor chamber are called gasification. Raw materials experience heat, pressure and an environment rich or low in oxygen content in the gasification. There are three main products from the gasification process which are hydrocarbon gas (also called syngas), hydrocarbon liquid (oil) and coal (carbon black and ash). Syngas can be used as a fuel to produce electricity or steam or as a based material for many types of chemicals. When mixed with air, syngas can be used in petrol or diesel engines as a vehicle fuel with minor modifications to the engine. Gasification technology has several advantages over traditional fossil fuel-based energy production methods. It is able to produce energy from a wide range of raw materials, including waste, which reduces the need for landfills and incineration. Additionally, gasification can reduce greenhouse gas emissions by producing energy from low or negative carbon value raw materials.

16 June 2024 in Jurnal Mekanikal
Verified
Journal Article
Open access
PDF file
NONorazila Othman
Norazila Othman
Micro-gas turbine (MGT) is compact and self-sufficient distributed power generation units that exhibit reliability and has the capability to mitigate carbon monoxide (CO) emissions while conserving energy together with biomass used as a fuel sources. It is expected that they will have a noteworthy impact on securing the provision of upcoming energy resources for isolated areas, disaster condition and off-grid zone regardless of their connection to the power grid. However, the MGT performance using the various fuel still questionable. Databases and procedure of the MGT performance analysis should be established well to understand the overall MGT performance. In this study, MGT performance is determined by utilising the computer aided design (CAD) and solver software such as SOLIDWORKS and ANSYS-FLUENT. CAD drawing is used to design the combustion chamber and simulation performance is visualised in specific inside the combustion chamber (CC) of the MGT. The solver software was employed for the purpose of conducting computational fluid dynamics (CFD) analyses. The optimal configuration contained a flame holder with a diameter of 50 millimetres, a chamber height of 60 centimetres, four holes with diameters of 6, 8, and 10 millimetres, and a dead zone separating the combustion and dilution zones. The air inlet boundary conditions were established by utilising the specifications and compressor maps of the Garrett GT25 turbocharger in the simulation. The simulation employed the standard k-ε model of viscous model and energy equation to establish an optimal maximum airflow rate of 0.15 kg/s at a pressure of 1.4 bar, resulting in a compressor efficiency of approximately 70%. Three different fuels, diesel-air, wood-volatiles-air, and coal-hv-volatile, were used to determine the MGT's optimal performance. Successful investigation of this study opts to significant contribution to understand the MGT performance thus, give the awareness to choose as one of the alternative power generations which can be used in the future.

16 October 2026 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
OAOyinbonogha Fred Agonga
Oyinbonogha Fred Agonga
NONorazila Othman
Norazila Othman
MYMohd Fairus Mohd Yasin
Mohd Fairus Mohd Yasin
EEEbikabowei Emmanuel Enemugha
Ebikabowei Emmanuel Enemugha
KKKelvin Kotingo
Kelvin Kotingo