For single crystal diamond (SCD) to gain practical use in technical applications including solid state electronics, thin (<1 μm), doped epitaxial SCD layers with very low (<1 nm) surface roughness are required. Conventional SCD chemical mechanical polishing (CMP) processes are insufficient to meet the requirements of such applications because the material removal rate (MRR) is often characterized inappropriately, and the material removal uniformity is seldom considered. In this study, chemical vapor deposition (CVD) growth of two lightly boron doped (p-) epilayers was performed on 3misoriented (100) high pressure high temperature substrates of 4.5 x 4.5 mm2 area. A subsequent 8-hour oxidative CMP process utilizing potassium permanganate and a novel self-leveling holder design decreased the average surface roughness from 3.83 nm and 1.57 nm to 0.20 nm and 0.16 nm for the two samples, respectively. MRRs were determined by evaluating five circular wear monitor structures in each sample by atomic force microscopy before and after the CMP process. The average MRRs were found to be 38.6 nm/hr and 37.3 nm/hr for the two samples. The purpose of this study is to demonstrate a CMP process suitable for polishing thin SCD epilayers to meet the needs of solid-state electronics applications.
This work discusses a study on a surface treatment for creating extremely durable low-friction, wear and corrosion-resistant surfaces for tribological components in harsh conditions. A duplex surface treatment was developed that combines the advantages of ultra-fast electrochemical boriding with those of hard tetrahedral amorphous carbon coatings. The friction and wear properties of the duplex treatment are compared to the boride-only treatment of AISI 1045 steel, while corrosion and contact fatigue behaviors of the duplex layer are compared to that of the single-layer carbon coating on low carbon steel. The duplex treatment yields wear rates as low as 6 × 10−8 mm3·N−1·m−1 and a coefficient of friction of 0.14 when tested against a steel counter face. The contact fatigue impact tests reveal that the high hardness of 1200 HV0.05 of the borided layer in the duplex treatment leads to higher resistance against indentation but is accompanied by a higher incidence of crack initiation, being in good agreement with the finite-element modeling of nanoindentation results. The duplex coatings exhibit resistance to pinhole corrosion as evidenced by a 3 h exposure to 15% HCl at room temperature.
21 November 2025 in Journal of Vacuum Science & Technology A
Aluminum nitride (AlN) is a promising piezoelectric material for surface acoustic wave (SAW) devices due to its high acoustic velocity and thermal stability. Achieving high-performance SAW devices requires highly c-axis-oriented, columnar AlN thin films with low surface roughness and high Young’s modulus. In this work, [002]-oriented AlN thin films were deposited by radiofrequency sputtering using a ceramic AlN target. Key deposition parameters, including substrate temperature, chamber pressure, and gas composition, were optimized to enhance film quality. Characterization via atomic force microscopy, x-ray diffraction, and scanning electron microscopy confirmed the films’ low surface roughness (0.71 nm), columnar structure with c-axis orientation, and strong crystallinity. The films exhibited a high Young’s modulus of up to 325 GPa. Optimized AlN layers were used to fabricate SAW devices, whose performance was strongly influenced by the AlN thickness and the geometry of the interdigital transducer, including electrode number and device aperture.
A single beam plasma source was used to deposit hydrogenated amorphous carbon (a-C:H) coatings at room temperature. Using methane source gas, a-C:H coatings were deposited at different radio frequency (RF) power to fabricate transparent and durable coatings. The film deposition rate was almost linearly proportional to the ion source power. Hydrogenated amorphous carbon films of ~100 nm thickness appeared to be highly transparent from UV to the infrared range with a transmittance of ~90% and optical bandgap of ~3.7 eV. The coatings also possess desirable mechanical properties with Young’s modulus of ~78 GPa and density of ~1.9 g/cm3. The combined material properties of high transmittance and high durability make the ion-source-deposited a-C:H coatings attractive for many applications.
26 July 2024 in Journal of Vacuum Science & Technology A
Nitrogen-incorporated tetrahedral amorphous carbon (ta-C:N) has electrochemical properties that are comparable to boron-doped diamond (BDD), but can be deposited at low temperatures, and is scalable across substrate areas substantially exceeding what is currently possible for BDD. Most published studies of ta-C:N electrodes focus on films deposited on conductive substrates due to the relatively high resistivity of ta-C:N compared to other carbon and metal-based electrodes. However, some of the most compelling applications of electrochemistry, for example, optically transparent spectroelectrochemical devices, require insulating substrates such as fused silica glass (FSG) or polymers. In this study, we deposited 50 nm of ta-C:N by laser controlled pulsed cathodic vacuum arc (Laser-Arc) onto insulating FSG to investigate the electrochemical response compared to conductive silicon (c-Si) substrates. No oxidation or reduction of potassium ferrocyanide during cyclic voltammetry (CV) could be observed at the FSG electrode. To address this, we introduced a 5 nm chromium (Cr) interlayer deposited by magnetron sputtering between ta-C:N and FSG. This electrode configuration led to clear cathodic and anodic CV peaks of potassium ferro/ferricyanide but with an increased peak separation compared to the c-Si electrode. However, the peak separation could be reduced to values comparable to ta-C:N deposited on c-Si by optimizing Cr sputtering conditions and introducing an argon plasma pretreatment of the FSG surface. Atomic force microscopy revealed that these changes improved the Cr growth homogeneity, which in turn increased the electrical conductivity of the Cr interlayer as determined by 4-point probe measurements.