Heavy vehicles make up a relatively small percentage of traffic volume on Malaysian roads compared to other vehicle types. However, heavy vehicles have been reported to be involved in 30,000–40,000 accidents yearly and caused significantly more fatalities. Rollover accidents may also incur cargo damages and cause environmental or human disasters for vehicles that carry hazardous cargos if these contents are spilled. Thus, in this paper, a comprehensive study was conducted to investigate the effects of vehicle and road conditions on rollover of commercial heavy vehicles during cornering at curved road sections. Vehicle conditions include the heavy vehicle class (based on the axle number and vehicle type), speed and gross vehicle weight, while road conditions include the cornering radius and coefficient of friction values. In order to reduce the risks involved in usage of actual heavy vehicles in crash experiments, a simulation approach using a multi-body vehicle dynamic software was applied in this study, where the verified virtual heavy vehicle model was simulated and the output results were extracted and analyzed. The results showed that a maximum of 40% and a minimum of 23% from the total number of simulations resulted in an unsafe condition (indicated as failed) during the simulations. From the unsafe conditions, two types of rollover accidents could be identified, which were un-tripped and tripped rollovers. The heavy vehicle speed was also found to have a strong correlation to the lateral acceleration (to cause a rollover), followed by gross vehicle weight, coefficient of friction and cornering radius, respectively.
21 September 2023 in International Journal of Automotive and Mechanical Engineering
Commercial heavy vehicle is commonly used to transport goods and people efficiently and safely. A previous study has shown a number of gross vehicle weight (GVW) and speed violations recorded in selected areas in Malaysia, and two-axle single unit truck (SUT) is the most commercial heavy vehicle type that violated the weight and speed regulation. Moreover, accidents involving heavy vehicles result in severe traffic disruption and fatalities to other road users due to heavy vehicle size and capability to carry huge amounts of goods. Thus, the objective of this paper is to investigate the correlation and effect of the vehicle and road condition on the two-axle SUT rollover during cornering on the curved road using the simulation approach. The verified two-axle SUT model is simulated using IPG-TruckMaker® with different GVW, speed, and coefficient of friction values while the cornering radius, driver behaviour and load’s center of gravity remain constant. A correlation based on performance indices is established, and it is found that the heavy vehicle speed has a strong correlation to the lateral load transfer to cause a rollover followed by GVW and coefficient of friction, respectively.
3 March 2025 in International Journal of Entrepreneurship and Management Practices
Cladosiphon okamuranus (C. okamuranus), commonly known as Okinawa mozuku, is a brown seaweed species with significant economic and nutritional importance, particularly in East Asian countries. It is widely distributed in the subtropical waters of the Okinawa region in Japan. This seaweed is characterized by its unique, thread-like structure and has been recognized for its high content of valuable nutrients, including fucoidan, a sulfated polysaccharide known for its potential health benefits. The nutritional values of C. okamuranus are diverse; it is a rich source of minerals, vitamins, and dietary fibre, making it a beneficial addition to various diets. Its commercialization opportunities are expanding due to its growing popularity as a health food and its potential use in pharmaceuticals and cosmetics. However, the conservation status of C. okamuranus is a concern. Overharvesting, habitat destruction, and climate change pose threats to its natural populations. Sustainable harvesting practices and aquaculture development are crucial for preserving this species and ensuring its availability for future generations. In summary, C. okamuranus offers promising nutritional and commercial prospects, but its sustainability must be carefully managed to prevent depletion and ensure its long-term viability.
A lightwheel has the potential to be widely used to enhance the safety of racing cars and improve car performance by providing an estimation of wheel width spokes quantity, and other constant variables. This study is, therefore, aimed at designing a new lightweight racing wheel. In this study, a Finite Element Model (FEA) was implemented to investigate the static analysis of the newly designed lightweight racing wheel. Since the lightweight wheel characteristics play an important role in the stability and control of the racing car under severe manoeuvres, the wheel mass, von Mises stress, deformation, and safety factor were determined. It was observed that the circumferential component is vital for estimating the lightweight design of racing car wheel design. Therefore, this parameter could be better assessed for future studies.
5 May 2024 in Journal of Advanced Research in Applied Mechanics
This paper presents the design of a new lightweight racing wheel. A lightweight wheel has the potential of providing better manoeuvrability and overall control during high performance operation. In this study, a Finite Element Model (FEA) was implemented to investigate the dynamic cornering fatigue of the newly designed lightweight racing wheel. Due to the reason that the test was performed in a worst-case scenario and the specimens were required to achieve the minimum life cycles, out of the 36 specimens, the result has shown that only 12 specimens were able to pass the test. Based on the analysis, the specimens highlighted in green were those that could pass the test. It can be noted that those passed specimens were having 7 and 8 spokes. Conclusively, the cornering fatigue test shows that the spoke is vital in affecting the wheels' performance. For future studies, it is recommended that experimental studies are conducted.