The search for efficient materials for sustainable infrastructure is an urgent challenge toward potential negative emission technologies and the global environmental crisis. Pleasant, efficient sunlight-activated coatings for applications in self-cleaning windows are sought in the glass industry, particularly those produced from scalable technologies. The current work presents visible-light-active iodide-doped BiOBr thin films fabricated using aerosol-assisted chemical vapor deposition. The impact of dopant concentration on the structural, morphological, and optical properties was studied systematically. The photocatalytic properties of the parent materials and as-deposited doped films were evaluated using the smart ink test. An optimized material was identified as containing 2.7 atom % iodide dopant. Insight into the photocatalytic behavior of these coatings was gathered from photoluminescence and photoelectrochemical studies. The optimum photocatalytic performance could be explained from a balance between photon absorption, charge generation, carrier separation, and charge transport properties under 450 nm irradiation. This optimized iodide-doped BiOBr coating is an excellent candidate for the photodegradation of volatile organic pollutants, with potential applications in self-cleaning windows and other surfaces.

Despite the high potential impact of aqueous battery systems, fundamental characteristics such as cost, safety, and stability make them less feasible for large-scale energy storage systems. One of the main barriers encountered in the commercialization of aqueous batteries is the development of large-scale electrodes with high reversibility, high rate capability, and extended cycle stability at low operational and maintenance costs. To overcome some of these issues, the current research work is focused on a new class of material based on phenethylammonium bismuth iodide on fluorine doped SnO₂-precoated glass substrate via aerosol-assisted chemical vapor deposition, a technology that is industrially competitive. The anode materials were electrochemically investigated in Zn²⁺ aqueous electrolytes as a proof of concept, which presented a specific capacity of 220 mAh g⁻¹ at 0.4 A g⁻¹ with excellent stability after 50 scans and capacity retention of almost 100%.