Dawid Pacek

Dr. Dawid Pacek

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
PBPrzemyslaw Badurowicz
Przemyslaw Badurowicz
DPDawid Pacek
Dawid Pacek
This paper describes the process of creating a numerical FEM (finite element method) model of the 5.56 × 45 mm SS109 projectile. The model was used to calculate the temperatures occurring in the projectile materials during the impact on the steel plate at an angle of 45°. The purpose of the investigation is to estimate the ability of a ricocheting projectile to cause ignition. For the same projectile, experimental tests were also carried out under the conditions adopted for the numerical investigation in order to validate the FEM model. During the experiment, temperature was measured with a thermal camera; the phenomenon was also recorded with a colour high-speed camera.

30 June 2015 in Problems of Mechatronics Armament Aviation Safety Engineering
Verified
Journal Article
Open access
AWAdam Wisniewski
Adam Wisniewski
DPDawid Pacek
Dawid Pacek

26 February 2020 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Verified
Journal Article
Closed access
PDF file
DPDawid Pacek
Dawid Pacek
PKP Kolodziejczak
P Kolodziejczak
KGK Grzelak
K Grzelak
Janusz TorzewskiJanusz Torzewski
Janusz Torzewski
PPP Podgorzak
P Podgorzak
Despite the intensive development of plastics and composite materials in the case of armours employed to protect vehicles, armour steel remains a material commonly and effectively used. This is especially evident in the base armour of armoured vehicles, where the body is made of welded armour steel plates. However, the area of joining both the weld and the heat affected zone are sensitive areas with the reduced protective capability. In the case of laser welding in comparison with methods such as shielded metal arc welding and gas metal arc welding, it is possible to narrow down the above mentioned areas. The paper presents the results of research on the protective capability of welded zone of armour steel plates with a hardness of 500 HB. In the first part of the work, in order to select the proper parameters for the bonding process, different connection variants were made and their microstructure and selected mechanical properties were analysed. After selecting the best variant of the welding process, samples (200 mm × 200 mm) consisting of two welded plates with dimensions 100 mm × 200 mm were made for testing. The thickness of the plates was selected in such a way that in the areas outside the bonding zone, the lack of complete perforation by the projectiles used in the tests is guaranteed. The samples were shot at the weld location and at different distances from the weld to verify, for the chosen method of joining steel plates, if the welded armour loses its protective capability and, possibly, how wide this area may be.

31 December 2018
Verified
Book Chapter
Closed access
PDF file
DPDawid Pacek
Dawid Pacek

19 April 2024 in Defence Science Journal
Verified
Journal Article
Open access
PDF file
DPDawid Pacek
Dawid Pacek
PBPrzemyslaw Badurowicz
Przemyslaw Badurowicz
This research manuscript describes the process of degradation of an Armox 600 armour plate during the impact of a 5.56×45 mm SS109 projectile. The creation process of the numerical FEM model of the projectile is presented. The projectile impact angle is set between 15° and 90°, and this phenomenon is investigated via numerical and experimental approaches. The experiment is conducted under the same conditions as the numerical approach to validate the FEM model. The experiments are conducted using a high-speed camera. This research manuscript presents the influence of the projectile impact angle on the degradation of the armour plate and its protection capability for different angles. The results demonstrate the dependence of the transferred energy on the armour plate, speed of the particles after impact, and trace dimensions on the armour plate for different impact angles.

9 April 2023 in Continuum Mechanics and Thermodynamics
Verified
Journal Article
Open access
PDF file
Paweł ŻochowskiPaweł Żochowski
Paweł Żochowski
DPDawid Pacek
Dawid Pacek
EBEwa Bednarczyk
Ewa Bednarczyk
MBMarcin Bajkowski
Marcin Bajkowski
RGRoman Grygoruk
Roman Grygoruk
MJMarcin Jasinski
Marcin Jasinski
Methods used nowadays in forensic laboratories allow to stop some kinds of projectiles with degree of deformation which lets to use them for comparing traces to projectiles found on the crime scene. However they are not useful for every type of projectiles. Comparative physical tests are enough to indicate the best method for soft catching projectiles. For this aim point of view no modeling needed. The paper presents the results of ballistic tests of impact of chosen types of soft point projectiles into water. The behavior of projectiles of various shapes, with different kinetic energy, was analyzed. On the basis of the obtained results, the projectiles with the highest susceptibility to deformation were identified. Research works described in the paper were performed within the framework of the project Laboratory stand for stopping high-energy projectiles financed from the National Centre for Research and Development (Agreement no. DOB-BIO10/04/02/ 2019). The project is implemented in cooperation with Warsaw University of Technology, Military Institute of Armament Technology and Tebbex 2 since 2019 to 2022.