Przemyslaw Badurowicz

Mr. Przemyslaw Badurowicz

Military Institute of Armament Technology, Zielonka, Poland
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
PBPrzemyslaw Badurowicz
Przemyslaw Badurowicz
DPDawid Pacek
Dawid Pacek
This paper describes the process of creating a numerical FEM (finite element method) model of the 5.56 × 45 mm SS109 projectile. The model was used to calculate the temperatures occurring in the projectile materials during the impact on the steel plate at an angle of 45°. The purpose of the investigation is to estimate the ability of a ricocheting projectile to cause ignition. For the same projectile, experimental tests were also carried out under the conditions adopted for the numerical investigation in order to validate the FEM model. During the experiment, temperature was measured with a thermal camera; the phenomenon was also recorded with a colour high-speed camera.

1 July 2022 in Defence Science Journal
Verified
Journal Article
Open access
PDF file
PBPrzemyslaw Badurowicz
Przemyslaw Badurowicz
PKPrzemysław Kupidura
Przemysław Kupidura
BFBartosz Fikus
Bartosz Fikus
Estimation of kinematic and dynamic parameters of weapon mechanisms during operation is one of the crucial elements of design and optimisation. This study presents results of numerical and experimental investigations of a short-recoil-operated weapon action cycle. Theoretical considerations were based on multibody systems and finite element approaches. An experimental stand was adopted to investigate the kinematic characteristics of pistol parts and provide a set of slide displacement and velocity time courses. Comparison of theoretical and experimental data allowed for positive validation of the investigated model. The multibody systems numerical approach ensured a maximum relative discrepancy with experiment of 3.5 per cent for the velocity of recoiled parts, while finite element analysis calculations yielded a value of 12.7 per cent. Finally, parametric analyses were conducted to determine the influence of selected design characteristics on weapon operation. The analyses proved the correctness of the adopted design assumptions.

19 April 2024 in Defence Science Journal
Verified
Journal Article
Open access
PDF file
DPDawid Pacek
Dawid Pacek
PBPrzemyslaw Badurowicz
Przemyslaw Badurowicz
This research manuscript describes the process of degradation of an Armox 600 armour plate during the impact of a 5.56×45 mm SS109 projectile. The creation process of the numerical FEM model of the projectile is presented. The projectile impact angle is set between 15° and 90°, and this phenomenon is investigated via numerical and experimental approaches. The experiment is conducted under the same conditions as the numerical approach to validate the FEM model. The experiments are conducted using a high-speed camera. This research manuscript presents the influence of the projectile impact angle on the degradation of the armour plate and its protection capability for different angles. The results demonstrate the dependence of the transferred energy on the armour plate, speed of the particles after impact, and trace dimensions on the armour plate for different impact angles.

4 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
MJMarcin Jasinski
Marcin Jasinski
KSKrzysztof Jacek Szczurowski
Krzysztof Jacek Szczurowski
AWAdam Wisniewski
Adam Wisniewski
PBPrzemyslaw Badurowicz
Przemyslaw Badurowicz
TBTadeusz Bartkowiak
Tadeusz Bartkowiak
NTNorbert Tuśnio
Norbert Tuśnio
This paper presents the results of a study of the hazards of ground ignition and/or explosion when various small-calibre projectiles struck various solid materials placed on a test stand in environments at risk of ignition (fire) or explosion (ricochets and projectile penetration of obstacles). For projectile ricochetting tests, the following were used: an armour plate, concrete, sidewalk and granite slabs, etc., and various small-calibre projectiles: 7.62 × 51 mm SWISS PAP, 7.62 × 51T, 7.62 × 51 mm M80, 7.62 × 54R B-32, 7.62 × 54R LPS and .308 Win. Norma Ecostrike. Projectiles impacts were recorded with a high-speed camera (50,400 fps) and thermal cameras (660 fps) and (2615 fps). The ignition capability of solid flammable materials during projectile ricochetting was studied, and the temperatures and surface areas of isotherms were measured as a function of time. From the spherical distribution of thermal energy radiation in space, their volumes, masses of air occupying the studied area, masses of projectile disintegrating into fragments (after impact), thermal energies during projectile ricochetting, histograms of area temperatures and temperatures were calculated. This energy was compared with the minimum ignition energy of the selected gases and liquid vapours, and the ignition temperature were determined. The probabilities of some of the selected gases and liquid vapours which can ignite or cause an explosion were determined. The thermal energies of the 7.62 × 54R B-32 (3400–9500 J) and 7.62 × 51T (2000–3700 J) projectiles ricochetting on the Armox 600 plate was sufficient to ignite (explode) propane−butane gas. The thermal energy of 7.62 × 54R B-32 projectiles ricochets on the non-metallic components (800–1200 J) was several times lower than that of projectiles ricochets on an Armox 600 plate (3400–9500 J). This is due to the transfer of much of the kinetic energy to the crushing of these elements.

30 June 2023 in Problems of Mechatronics Armament Aviation Safety Engineering
Verified
Journal Article
Closed access
PBPrzemyslaw Badurowicz
Przemyslaw Badurowicz
PKPrzemysław KUPIDURA
Przemysław KUPIDURA
BFBartosz Fikus
Bartosz Fikus
The paper describes the results of the parametric analysis obtained using the multibody systems. Numerical analysis allows checking different variants of the weapon without the need of building a lot of experimental models. As a part of the analysis, the impact of the slide mass, the recoil spring stiffness, the friction coefficients, the propellant gas pressure, and the force of bullet engraving the barrel on the kinematic characteristics of the weapon were checked. The extreme values of the slide mass and the recoil spring stiffness were selected, after crossing them, the correct operation of the weapon would not be possible. The operation of the pistol was checked for its multiple variants, taking into account its lubrication, lack of lubrication, and lack of friction by appropriate selection of the friction coefficients. The propellant gas pressure variants were selected to reflect the pressure in the barrel during shoot using ammunition manufactured according to different standards and of different quality. The models, taking into account the force of bullet engraving the barrel and those ignoring such force, were developed to check their impact on the kinematic characteristics of a short recoil operated weapon.

4 January 2019 in PROBLEMY TECHNIKI UZBROJENIA
Verified
Journal Article
Closed access
WSWiesław Stępniak
Wiesław Stępniak
PBPrzemyslaw Badurowicz
Przemyslaw Badurowicz
The paper is a technical communicate presenting the history of development, the design and its characteristics, the basic tactical-technical data of 9x19 mm PW INKA pistol model and the results of performed tests. It describes the principle of operation, the type and characteristics of triggering mechanism, the safety mechanisms, its ergonomic features including the two-side manipulators and replaceable pads of the handle, the sighting instruments, the holster and the origin of pistol’s name.