Siti Azlina Rosli

Ms. Siti Azlina Rosli

Universiti Sains Malaysia (USM)
+1
orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 March 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
SRSiti Azlina Rosli
Siti Azlina Rosli
NANurhaswani Alias
Nurhaswani Alias
NBNurulhuda Bashirom
Nurulhuda Bashirom
SIsyahriza ismail
syahriza ismail
WTWai Kian Tan
Wai Kian Tan
ZLZAINOVIA LOCKMAN
ZAINOVIA LOCKMAN
In this paper, titanium–dioxide (TiO2) nanotubes (TNTs) are formed by anodic oxidation with a fluorinated glycerol–water (85% and 15%, respectively) electrolyte to examine the effect of fluoride ion concentration, time, and applied voltage on TNT morphologies and dimensions. For fluoride ion concentration, the surface etching increases when the amount of ammonium fluoride added to the electrolyte solution increases, forming nanotube arrays with a clear pore structure. At a constant voltage of 20 V, TNTs with an average length of ~2 µm are obtained after anodization for 180 min. A prolonged anodization time only results in a marginal length increment. The TNT diameter is voltage dependent and increases from approximately 30 nm at 10 V to 310 nm at 60 V. At 80 V, the structure is destroyed. TNTs formed at 20 V for 180 min are annealed to induce the TiO2 anatase phase in either air or nitrogen. When ethylenediaminetetraacetic acid is added as a hole scavenger, 100% hexavalent chromium removal is obtained after 120 min of sunlight exposure for nitrogen-annealed TNTs.

24 October 2011 in Advanced Materials Research
Verified
Journal Article
Closed access
PDF file
SRSiti Azlina Rosli
Siti Azlina Rosli
ZZZ. A. Zubir
Z. A. Zubir
NAN.M.A. Aziz
N.M.A. Aziz
In this study, the synthesis and characterization of ZnS nanoparticles in aqueous solution precipitation using MPA as capping agents were reported. The 3-mercaptopropionic acid (MPA) was used as the capping agent to control the size of the ZnS nanoparticles. We found that the particles size of ZnS using MPA as capping agent was less than 10nm; ranging from 6-8 nm in size and sphere in shape using TEM measurements. Meanwhile, the photoluminescence and optical absorption were collected using Spectrofluorometer. As the results, the emission band for photoluminescence spectra was blue (~ 425 nm) appeared for samples before refluxed. For samples which were refluxed for 7 hours, the photoluminescence consists of a peak at 385 nm.

1 November 2006
Verified
Conference Paper
Closed access
SRSiti Azlina Rosli
Siti Azlina Rosli
Azlan Abdul AzizAzlan Abdul Aziz
Azlan Abdul Aziz
HHHaslinda Abdul Hamid
Haslinda Abdul Hamid
Silicon (Si) etching process with low temperature is used for initial processing of semiconductor field emitter array cathodes for vacuum microelectronics, for optical reflecting gratings, for opto- and micromechanical devices. Most of them are performed by dry etching process especially in reactive ion etching (RIE) method with fluorocarbon-gases such as CF4, CHF3 and C3F8. In this work, results are shown that reactive ion etching of silicon using CF4/H2 is capable at meeting the requirement (anisotropy, high etch rate and high selectivity, simultaneously) similar to that by using reactive ion etching with fluorine-containing plasma. We have investigated the etching rate dependency on the percentage of hydrogen in the gas mixture, the total pressure and flow gas and found that by using a gas mixture with 33% of H2, the optimum rate of Si is achieved. The etch rate are found to increase with voltage, attaining a maximum rate 1780 A/min at -482V. Surface morphology of the etched samples is characterized by scanning electron microscopy and atomic force microscopy. The results revealed that the etched surface was anisotropic and the smoothness of the etched surface is comparable to that of polished wafer.

1 January 2019 in Materials Today: Proceedings
Verified
Journal Article
Closed access
NAN. Alias
N. Alias
SRSiti Azlina Rosli
Siti Azlina Rosli
ZHZ. Hussain
Z. Hussain
WTWai Kian Tan
Wai Kian Tan
AMA. Matsuda
A. Matsuda
ZLZ. Lockman
Z. Lockman

1 November 2006
Verified
Conference Paper
Closed access
SRSiti Azlina Rosli
Siti Azlina Rosli
Azlan Abdul AzizAzlan Abdul Aziz
Azlan Abdul Aziz
HHHaslinda Abdul Hamid
Haslinda Abdul Hamid
In this work, highly anisotropic Si plasma etching process has been developed in reactive ion etching (RIE) reactor. The etch chemistry utilized consists of a mixture of sulphur tetra fluoride (SF 6 ), oxygen (O 2 ) and argon (Ar). The use of Nickel as masks was successfully patterned on Si by lift-off. Lines of 50μm feature size were patterned on Si, resulting in perpendicular sidewalls and no observable undercutting. Etch rates were studied for gas compositions of SF 6 /O 2 /Ar, chamber pressures and DC bias. For chamber pressure in the range of 5 mTorr to 20 mTorr, the etch rates is found to increase with increasing dc bias, attaining a maximum rate of 2997 Å/min at 20 mTorr. Surface morphology after etching is checked by atomic force microscopy and scanning electron microscopy, which show that the anisotropic of the etched surface and the smoothness of the etched surface is comparable to that of the etched.

4 March 2016 in Materials Science Forum
Verified
Journal Article
Closed access
PDF file
AMAinorkhilah Mahmood
Ainorkhilah Mahmood
ZHZainuriah Hassan
Zainuriah Hassan
NANaser Mahmoud Ahmed
Naser Mahmoud Ahmed
Fong Kwong YamFong Kwong Yam
Fong Kwong Yam
LCLee Siang Chuah
Lee Siang Chuah
SRSiti Azlina Rosli
Siti Azlina Rosli
Porous GaN structures were formed from crystalline GaN on conducting AL2O3 substrate using Pt-assisted electroless etching in HF: CH3OH: H2O2 = 1:4:4 under illumination of 500 W UV lamp. Scanning electron microscope (SEM) photoluminescence (PL) and Raman spectra measurements evidenced important features of the pore morphology, nanostructures and optical properties. According to the SEM micrographs, the three-dimensional ridge structure appears with the formation of porous material between the ridges. The porous layer exhibited a substantial PL intensity enhancement with red-shifted band-edge PL peaks associated with the relaxation of compressive stress. The shift of E2(high) to the lower frequency in Raman spectra of the porous GaN films further confirms such a stress relaxation.