Qingqing Cao

Dr. Qingqing Cao

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 December 2021 in Remote Sensing
Verified
Journal Article
Open access
PDF file
QCQingqing Cao
Qingqing Cao
Imad Al-QadiImad Al-Qadi
Imad Al-Qadi
Moisture presence in asphalt concrete (AC) pavement is a major cause of damage to the pavement. In recent decades, an increasing need exists for non-destructive detection and monitoring of the moisture content in AC pavement. This paper provides a simulated approach to quantify the effect of internal moisture content on AC pavement dielectric properties using ground-penetrating radar (GPR). A heterogeneous numerical model was developed to simulate AC pavement with internal moisture at various saturation levels. The numerical model was validated using GPR surveys on cold-in-place recycling treated pavements. An empirical formula was derived from the simulation to correlate the dielectric constant with the moisture content for non-dry AC pavement. The results validated the proposed model and, hence, demonstrated the ability of GPR to monitor moisture variation in AC pavements.

27 March 2017 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
SZShengze Zhu
Shengze Zhu
XLXiuyu Liu
Xiuyu Liu
QCQingqing Cao
Qingqing Cao
Huang XiaomingHuang Xiaoming
Huang Xiaoming
Hydroplaning is a driving phenomenon threating vehicle’s control stability and safety. It happens when tire rolls on wet pavement with high speed that hydrodynamic force uplifts the tire. Accurate numerical simulation to reveal the mechanism of hydroplaning and evaluate the function of relevant factors in this process is significant. In order to describe the friction behaviors of tire-pavement interaction, kinetic friction coefficient curve of tire rubber and asphalt pavement was obtained by combining pavement surface power spectrum and complex modulus of tread rubber through Persson’s friction theory. Finite element model of tire-fluid-pavement was established in ABAQUS, which was composed of a 225-40-R18 radial tire and three types of asphalt pavement covered with water film. Mechanical responses and physical behaviors of tire-pavement interaction were observed and compared with NASA equation to validate the applicability and accuracy of this model. Then contact force at tire-pavement interface and critical hydroplaning speed influenced by tire inflation pressure, water film thickness, and pavement types were investigated. The results show higher tire inflation pressure, thinner water film, and more abundant macrotexture enhancing hydroplaning speed. The results could be applied to predict hydroplaning speed on different asphalt pavement and improve pavement skid resistance design.

9 April 2021 in Sensors
Verified
Journal Article
Open access
PDF file
QCQingqing Cao
Qingqing Cao
Imad Al-QadiImad Al-Qadi
Imad Al-Qadi
Ground-penetrating radar (GPR) has been used for asphalt concrete (AC) pavement density prediction for the past two decades. Recently, it has been considered as a method for pavement quality control and quality assurance. A numerical method to estimate asphalt pavement specific gravity from its dielectric properties was developed and validated. A three-phase numerical model considering aggregate, binder, and air void components was developed using an AC mixture generation algorithm. A take-and-add algorithm was used to generate the uneven air-void distribution in the three-phase model. The proposed three-phase model is capable of correlating pavement density and bulk and component dielectric properties. The model was validated using field data. Two methods were used to calculate the dielectric constant of the AC mixture, including reflection amplitude and two-way travel time methods. These were simulated and compared when vertical and longitudinal heterogeneity existed within the AC pavement layers. Results indicate that the reflection amplitude method is more sensitive to surface thin layers than the two-way travel time methods. Effect of air-void content, asphalt content, aggregate gradation, and aggregate dielectric constants on the GPR measurements were studied using the numerical model.

23 November 2022 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
QCQingqing Cao
Qingqing Cao
Imad Al-QadiImad Al-Qadi
Imad Al-Qadi
LALama Abufares
Lama Abufares
The non-destructive detection and monitoring of moisture content in asphalt concrete (AC) pavement is important, as moisture may cause adhesion failures between aggregates and asphalt, resulting in AC stripping and raveling. This paper introduces a novel deep residual network–Mois-ResNets–to predict the internal moisture content of AC pavement from ground-penetrating radar (GPR) measurements. A GPR signal database was established from field tests and numerical simulations. A developed heterogeneous numerical model was used to generate synthetic GPR signals by simulating asphalt pavements at various configurations, moisture contents, volumetrics, and dielectric properties. The Mois-ResNets model, which contains a short-time Fourier transform followed by a deep residual network, was trained to minimize the error between predicted moisture content level and ground-truth data. Testing results show that Mois-ResNets can achieve a classification accuracy of 91% on testing datasets, outperforming conventional machine learning methods. The proposed Mois-ResNets has the potential for using GPR measurements and deep learning methods for pavement internal moisture content prediction.

2 April 2021 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
PDF file
QCQingqing Cao
Qingqing Cao
Imad Al-QadiImad Al-Qadi
Imad Al-Qadi
Ground-penetrating radar (GPR) has shown great potential for asphalt concrete density prediction used in quality control and quality assurance. One challenge of continuous GPR measurements is that the measured dielectric constant could be affected by signal stability and antenna height. This would jeopardize the accuracy of the asphalt concrete density prediction along the pavement. In this study, signal instability and shifting antenna height during continuous real-time GPR measurements were identified as main sources of error. After using a bandpass filter to preprocess the signal, a least-square adaptive filter, using gradient descent and least mean square methods, was developed to reconstruct the received signal to improve its stability. In addition, simulations were performed to evaluate the impact of geometric spreading caused by shifting antenna height during testing. A height correction was developed using a power model to correct the height-change impact. The proposed filter and height-correction method were assessed using static and dynamic tests. The least-square adaptive filter improved signal stability by 50% and the height-correction method removed the effect of shifting antenna height almost entirely.

23 March 2023 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
LALama Abufares
Lama Abufares
QCQingqing Cao
Qingqing Cao
Imad Al-QadiImad Al-Qadi
Imad Al-Qadi
Ground-penetrating radar (GPR) is a non-destructive testing technique used to assess various civil structures, including pavements. It may be applied to predict asphalt concrete (AC) layer thicknesses and dry densities. Because moisture may exist in in-service AC pavement layers and hinder the density prediction, quantifying moisture content in AC would improve its layer-density prediction. In addition, quantifying moisture content of cold recycled pavements would allow monitoring of the curing process of the treatment. Hence, the proper time for opening roads to traffic and/or placing an overlay could be identified. In this study, data were collected from both field cold-recycling projects and laboratory test slabs. The combined dataset was used to correlate measured moisture content to the dielectric constant of AC mixes. The Al-Qadi–Cao–Abufares (ACA) model was derived based on the electromagnetic mixing theory. This model is a modification to the Al-Qadi–Lahouar–Leng (ALL) model; it incorporates the effect of moisture on the bulk dielectric constant to predict density of non-dry AC. The model predicts AC density with an average error of 2% and also predicts moisture content with a root mean square error of 0.5%.