The current trend in the evolution of sensor systems seeks ways to provide more accuracy and resolution, while at the same time decreasing the size and power consumption. The use of Field Programmable Gate Arrays (FPGAs) provides specific reprogrammable hardware technology that can be properly exploited to obtain a reconfigurable sensor system. This adaptation capability enables the implementation of complex applications using the partial reconfigurability at a very low-power consumption. For highly demanding tasks FPGAs have been favored due to the high efficiency provided by their architectural flexibility (parallelism, on-chip memory, etc.), reconfigurability and superb performance in the development of algorithms. FPGAs have improved the performance of sensor systems and have triggered a clear increase in their use in new fields of application. A new generation of smarter, reconfigurable and lower power consumption sensors is being developed in Spain based on FPGAs. In this paper, a review of these developments is presented, describing as well the FPGA technologies employed by the different research groups and providing an overview of future research within this field.

Flexible multisensorial systems are a very important issue in the current industry when disassembling and recycling tasks have to be performed. These tasks can be performed by a human operator or by a robot system. In the current paper a robotic system to perform the required tasks is presented. This system takes into consideration the distribution of the necessary tasks to perform the disassembly of a component using several robots in a parallel or in a cooperative way. The algorithm proposed to distribute the task among robots takes into consideration the characteristics of each task and the sequence that needs to be followed to perform the required disassembly of the product. Furthermore, this paper presents a disassembly system based on a sensorized cooperative robots interaction framework for the planning of movements and detections of objects in the disassembly tasks. To determine the sequence of the disassembly of some products, a new strategy to distribute a set of tasks among robots is presented. Subsequently, the visual detection system used for detecting targets and characteristics is described. To carry out this detection process, different well known strategies, such as matching templates, polygonal approach and edge detection, are applied. Finally, a visual-force control system has been implemented in order to track disassembly trajectories. An important aspect of this system is the processing of the sensorial information in order to guarantee coherence. This aspect allows the application of both sensors, visual and force sensors, co-ordinately to disassembly tasks. The proposed system is validated by experiments using several types of components such as the covers of batteries and electronic circuits from toys, and drives and screws from PCs.

Industrial and service robots deal with the complex task of grasping objects that have different shapes and which are seen from diverse points of view. In order to autonomously perform grasps, the robot must calculate where to place its robotic hand to ensure that the grasp is stable. We propose a method to find the best pair of grasping points given a three-dimensional point cloud with the partial view of an unknown object. We use a set of straightforward geometric rules to explore the cloud and propose grasping points on the surface of the object. We then adapt the pair of contacts to a multi-fingered hand used in experimentation. We prove that, after performing 500 grasps of different objects, our approach is fast, taking an average of 17.5 ms to propose contacts, while attaining a grasp success rate of 85.5%. Moreover, the method is sufficiently flexible and stable to work with objects in changing environments, such as those confronted by industrial or service robots.