Robotic manipulators have to constantly deal with the complex task of detecting whether a grasp is stable or, in contrast, whether the grasped object is slipping. Recognising the type of slippage—translational, rotational—and its direction is more challenging than detecting only stability, but is simultaneously of greater use as regards correcting the aforementioned grasping issues. In this work, we propose a learning methodology for detecting the direction of a slip (seven categories) using spatio-temporal tactile features learnt from one tactile sensor. Tactile readings are, therefore, pre-processed and fed to a ConvLSTM that learns to detect these directions with just 50 ms of data. We have extensively evaluated the performance of the system and have achieved relatively high results at the detection of the direction of slip on unseen objects with familiar properties (82.56% accuracy).

Industrial and service robots deal with the complex task of grasping objects that have different shapes and which are seen from diverse points of view. In order to autonomously perform grasps, the robot must calculate where to place its robotic hand to ensure that the grasp is stable. We propose a method to find the best pair of grasping points given a three-dimensional point cloud with the partial view of an unknown object. We use a set of straightforward geometric rules to explore the cloud and propose grasping points on the surface of the object. We then adapt the pair of contacts to a multi-fingered hand used in experimentation. We prove that, after performing 500 grasps of different objects, our approach is fast, taking an average of 17.5 ms to propose contacts, while attaining a grasp success rate of 85.5%. Moreover, the method is sufficiently flexible and stable to work with objects in changing environments, such as those confronted by industrial or service robots.

One of the challenges in robotic grasping tasks is the problem of detecting whether a grip is stable or not. The lack of stability during a manipulation operation usually causes the slippage of the grasped object due to poor contact forces. Frequently, an unstable grip can be caused by an inadequate pose of the robotic hand or by insufficient contact pressure, or both. The use of tactile data is essential to check such conditions and, therefore, predict the stability of a grasp. In this work, we present and compare different methodologies based on deep learning in order to represent and process tactile data for both stability and slip prediction.

Tactile perception is a rich source of information for robotic grasping: it allows a robot to identify a grasped object and assess the stability of a grasp, among other things. However, the tactile sensor must come into contact with the target object in order to produce readings. As a result, tactile data can only be attained if a real contact is made. We propose to overcome this restriction by employing a method that models the behaviour of a tactile sensor using 3D vision and grasp information as a stimulus. Our system regresses the quantified tactile response that would be experienced if this grasp were performed on the object. We experiment with 16 items and 4 tactile data modalities to show that our proposal learns this task with low error.

Este trabajo presenta un método para clasificar objetos agarrados con una mano robótica multidedo combinando en un descriptor híbrido datos propioceptivos y táctiles. Los datos propioceptivos se obtienen a partir de las posiciones articulares de la mano y los táctiles se extraen del contacto registrado por células de presión instaladas en las falanges. La aproximación propuesta permite identificar el objeto aprendiendo de forma implícita su geometría y rigidez usando los datos que facilitan los sensores. En este trabajo demostramos que el uso de datos bimodales con técnicas de aprendizaje supervisado mejora la tasa de reconocimiento. En la experimentación, se han llevado a cabo más de 3000 agarres de hasta 7 objetos domésticos distintos, obteniendo clasificaciones correctas del 95%con métrica F1, realizando una única palpación del objeto. Además, la generalización del método se ha verificado entrenando nuestro sistema con unos objetos y posteriormente, clasificando otros nuevos similares.