To investigate the mechanism of hydraulic fracture propagation in coal seams with discontinuous natural fractures, an innovative finite element meshing scheme for modeling hydraulic fracturing was proposed. Hydraulic fracture propagation and interaction with discontinuous natural fracture networks in coal seams were modeled based on the cohesive element method. The hydraulic fracture network characteristics, the growth process of the secondary hydraulic fractures, the pore pressure distribution and the variation of bottomhole pressure were analyzed. The improved cohesive element method, which considers the leak-off and seepage behaviors of fracturing liquid, is capable of modeling hydraulic fracturing in naturally fractured formations. The results indicate that under high stress difference conditions, the hydraulic fracture network is spindle-shaped, and shows a multi-level branch structure. The ratio of secondary fracture total length to main fracture total length was 2.11~3.62, suggesting that the secondary fractures are an important part of the hydraulic fracture network in coal seams. In deep coal seams, the break pressure of discontinuous natural fractures mainly depends on the in-situ stress field and the direction of natural fractures. The mechanism of hydraulic fracture propagation in deep coal seams is significantly different from that in hard and tight rock layers.

A particle element approach based on continuum-discontinuum element method (CDEM) is applied to optimize the automated top-coal drawing techniques in extra-thick coal seams. Numerical models with 100 drawing openings are created according to the field engineering geological conditions of Tongxin coal mine in China. An automated coal drawing control approach in numerical modelling based on time criterion is proposed. The rock mixed rate, top-coal recovery rate and the variance of the drawn top coal amount are counted and set as the statistical indicators to evaluate the top-coal drawing techniques. The traditional top-coal drawing criterion, “rocks appear, close the opening”, leads to low recovery of top coal and waste of coal resources in extra-thick coal seams, significantly weakening the transport stability and efficiency of the scraper conveyer. A three-round unequal time top-coal drawing technique is proposed for automated top-coal drawing. Three drawing openings, corresponding to the three top-coal drawing rounds respectively, are working at the same time; in each round, the top-coal drawing sequence is from the first drawing opening at one end of the working face to last drawing opening at another end; the drawing time of each round is not equal and increases with the round number. The numerical inversion approach of iteration steps can be used for real top-coal drawing time estimation and automated drawing process design to achieve a better top coal drawing effect, while the exact time for each drawing round still needs to be corrected by engineering practice.

In response to the severe occurrence of mining pressure in the fully mechanized top coal caving face of the extra-thick coal seam and the problem of strong rock pressure caused by the remaining coal pillars in the mining area on the isolated island fully mechanized top coal caving face, taking the 8102 isolated island working face of Tongxin Coal Mine as the background and by using methods such as on-site measurement and numerical simulation experiments, the characteristics of roof mining in the island longwall panel of extra-thick coal seams were analyzed. Establishing a mechanical model for the mining stress and overlying rock stress arch of an isolated working face, the mechanical characteristics of the isolated working face under special conditions were obtained. The results show that the longwall panel no. 8102 has an asymmetric long-arm T-shaped covering layer structure before mining and a C-shaped covering rock structure during mining, which will exacerbate the degree of mining pressure manifestation in the working face. Directional high-pressure hydraulic fracturing was implemented in the gob of longwall panel no. 8102, and the pressure reduction effect of the advance support section of the gob was obvious, ensuring the safety of the working face.

When inducing cracks, soundless cracking agents (SCAs) do not generate vibration, harmful gas, dust, nor flying rock fragment, making them suitable for hard rock roof breaking, rock burst prevention, oil or gas reservoir stimulation, and building demolition. In this study, SCA‐induced crack initiation and propagation in different stress conditions were modelled using a modified cohesive element method. A new traction‐separation law for describing rock compressive shear strength was proposed. The crack length and direction in bidirectional isobaric and unequal stress fields were analyzed in detail. The crack initiation pressure and the incremental ratio of crack length to SCA expansion pressure were proposed as two indicators to evaluate the difficulty in rock breaking in deep underground. Results indicate that (1) the modified cohesive element method used in this study is feasible to model crack propagation in deep rocks; (2) the maximum expansion pressure of SCAs depends on rock elastic modulus and geostress field and should be measured under a condition similar to deep underground prior to SCA borehole spacing design; when using the SCAs with a maximum expansion pressure of 100 MPa in 600 m underground, the suggested borehole spacing is less than 220 mm; and (3) σ₃ dominates the crack initiation pressure while the principal stress ratio σ₃/σ₁ and notch direction control the direction of crack propagation.

In this study, based on the engineering background of the No. 8222 working face of the Tashan coal mine in Shanxi Province, China, true triaxial experiments were carried out on Geotechnical Consulting and Testing Systems rock mechanics testing machine using cubic coal samples, and the numerical simulation was conducted through the FLAC3D software. Moreover, the stress evolution law of different layers of extra-thick coal seams and the failure mechanism of top coal in the fully mechanized caving were investigated, and the failure structure model of top coal was established. The results show that there are differences in the principal stress values at different layers of the top coal.