The use of distributed strain and temperature in optical fiber sensors based on Brillouin scattering for the monitoring of nuclear waste repository requires investigation of their performance changes under irradiation. For this purpose, we irradiated various fiber types at high gamma doses which represented the harsh environment constraints associated with the considered application. Radiation leads to two phenomena impacting the Brillouin scattering: 1) decreasing in the fiber linear transmission through the radiation-induced attenuation (RIA) phenomenon which impacts distance range and 2) modifying the Brillouin scattering properties, both intrinsic frequency position of Brillouin loss and its dependence on strain and temperature. We then examined the dose dependence of these radiation-induced changes in the 1 to 10 MGy dose range, showing that the responses strongly depend on the fiber composition. We characterized the radiation effects on strain and temperature coefficients, dependencies of the Brillouin frequency, providing evidence for a strong robustness of these intrinsic properties against radiations. From our results, Fluorine-doped fibers appear to be very promising candidates for temperature and strain sensing through Brillouin-based sensors in high gamma-ray dose radiative environments.

This paper presents the state of the art distributed sensing systems, based on optical fibres, developed and qualified for the French Cigéo project, the underground repository for high level and intermediate level long-lived radioactive wastes. Four main parameters, namely strain, temperature, radiation and hydrogen concentration are currently investigated by optical fibre sensors, as well as the tolerances of selected technologies to the unique constraints of the Cigéo’s severe environment. Using fluorine-doped silica optical fibre surrounded by a carbon layer and polyimide coating, it is possible to exploit its Raman, Brillouin and Rayleigh scattering signatures to achieve the distributed sensing of the temperature and the strain inside the repository cells of radioactive wastes. Regarding the dose measurement, promising solutions are proposed based on Radiation Induced Attenuation (RIA) responses of sensitive fibres such as the P-doped ones. While for hydrogen measurements, the potential of specialty optical fibres with Pd particles embedded in their silica matrix is currently studied for this gas monitoring through its impact on the fibre Brillouin signature evolution.

Water content is a key parameter to monitor in nuclear waste repositories such as the planed underground repository in Bure, France, in the Callovo‐Oxfordian (COx) clay formation. High‐frequency electromagnetic (HF‐EM) measurement techniques, i.e., time or frequency domain reflectometry, offer useful tools for quantitative estimation of water content in porous media. However, despite the efficiency of HF‐EM methods, the relationship between water content and dielectric material properties needs to be characterized. Moreover, the high amount of swelling clay in the COx clay leads to dielectric relaxation effects which induce strong dispersion coupled with high absorption of EM waves. Against this background, the dielectric relaxation behavior of the clay rock was studied at frequencies from 1 MHz to 10 GHz with network analyzer technique in combination with coaxial transmission line cells. For this purpose, undisturbed and disturbed clay rock samples were conditioned to achieve a water saturation range from 0.16 to nearly saturation. The relaxation behavior was quantified based on a generalized fractional relaxation model under consideration of an apparent direct current conductivity assuming three relaxation processes: a high‐frequency water process and two interface processes which are related to interactions between the aqueous pore solution and mineral particles (adsorbed/hydrated water relaxation, counter ion relaxation and Maxwell‐Wagner effects). The frequency‐dependent HF‐EM properties were further modeled based on a novel hydraulic‐mechanical‐electromagnetic coupling approach developed for soils. The results show the potential of HF‐EM techniques for quantitative monitoring of the hydraulic state in underground repositories in clay formations.

Although optical fiber sensors have been developed for 30 years, there is a gap between lab experiments and field applications. This article focuses on specific methods developed to evaluate the whole sensing chain, with an emphasis on (i) commercially-available optoelectronic instruments and (ii) sensing cable. A number of additional considerations for a successful pairing of these two must be taken into account for successful field applications. These considerations are further developed within this article and illustrated with practical applications of water leakage detection in dikes and concrete structures monitoring, making use of distributed temperature and strain sensing based on Rayleigh, Raman, and Brillouin scattering in optical fibers. They include an adequate choice of working wavelengths, dedicated localization processes, choices of connector type, and further include a useful selection of traditional reference sensors to be installed nearby the optical fiber sensors, as well as temperature compensation in case of strain sensing.

Raman Distributed Temperature Sensors (RDTSs) offer exceptional advantages to monitor the envisioned French deep geological repository for nuclear wastes, called Cigéo. Both γ-ray and hydrogen release from nuclear wastes can strongly affect the temperature measurements made with RDTS. We present experimental studies on how the performances of RDTS evolve in harsh environments like those associated with γ-rays or combined radiations and H ₂ release. The response of two standard and one radiation tolerant multimode fibers (MMFs) are investigated. In all fibers the differential induced attenuation between Stokes and anti-Stokes signal, (α _AS - α _S ) causes a temperature errors, up to 30 ^° C with standard multimode fibers (100 m) irradiated at 10 MGy dose. This degradation mechanism that is more detrimental than the radiation induced attenuation (RIA) limiting only the sensing range. The attenuation in the [800-1600 nm] spectral range at room temperature is explored for the three fibers γ-irradiated and/or hydrogen loaded to understand the origin of the differential RIA. We show that by adapting the characteristics of the used fiber for the sensing, we could limit its degradation but that additional hardening by system procedure is necessary to correct the T error in view of the integration of our RDTS technology in Cigéo. The current version of our correction technique allows today to limit the temperature error to ~ 2 ^° C for 10 MGy irradiated samples.