Over the past decades, extensive studies on municipal solid waste incineration (MSWI) ashes have been performed to develop more effective recycling and waste management programs. Despite the large amount of research activities and the resulting improvements to MSWI ashes, the recycling programs for MSWI ashes are limited. For instance, although the U.S. generates more MSWI ashes than any other country in the world, its reuse/recycle programs are limited; bottom ash and fly ash are combined and disposed of in landfills. Reuse of MSWI ashes in the construction sectors (i.e., geomaterials, asphalt paving, and concrete products) as replacements for raw materials is one of most promising options because of the large consumption and relatively lenient environmental criteria. The main objective of this study was to comprehensively review MSWI ashes with regard to specific engineering properties and their performance as construction materials. The focus was on (1) the current practices of MSWI ash management (in particular, a comparison between European countries and the U.S.), (2) the engineering properties and performance of ashes when they are used as substitutes of construction materials and for field applications, and (3) the environmental properties and criteria for the use of MSWI ashes. Overall, the asphalt and concrete applications are the most promising, from both the mechanical and leachate viewpoints. However, cons were also observed: high absorption of MSWI ash requires a high asphalt binder content in hot-mix asphalt, and metallic elements in the ash may generate H₂ gas in the high-pH environment of the concrete. These side effects can be predicted via material characterization (i.e., chemical and physical), and accordingly, proper treatment and/or modified mix proportioning can be performed prior to use.

In this study, the amount of calcite precipitate resulting from microbially induced calcite precipitation (MICP) was estimated in order to determine the optimal conditions for precipitation. Two microbial species (Staphylococcus saprophyticus and Sporosarcina pasteurii) were tested by varying certain parameters such as (1) initial potential of hydrogen (pH) of urea-CaCl₂ medium, (2) temperature during precipitation, and (3) the reaction duration. The pH values used for testing were 6, 7, 8, 9, and 10, the temperatures were 20, 30, 40, and 50 °C, and the reaction durations were 2, 3, and 4 days. Maximum calcite precipitation was observed at a pH of 7 and temperature of 30 °C. Most of the precipitation occurred within a reaction duration of 3 days. Under similar conditions, the amount of calcite precipitated by S. saprophyticus was estimated to be five times more than that by S. pasteurii. Both the species were sensitive to temperature; however, S. saprophyticus was less sensitive to pH and required a shorter reaction duration than S. pasteurii.

Depressions due to sinkhole formation cause significant structural damages to buildings and civil infrastructure. Traditionally, visual inspection has been used to detect sinkholes, which is a subjective way and time- and labor-consuming. Remote sensing techniques have been introduced for morphometric studies of karst landscapes. This study presents a methodology for the probabilistic detection of sinkholes using LiDAR-derived digital elevation model (DEM) data. The proposed study provides benefits associated with: (1) Detection of unreported sinkholes in rural and/or inaccessible areas, (2) automatic delineation of sinkhole boundaries, and (3) quantification of the geometric characteristics of those identified sinkholes. Among sixteen morphometric parameters, nine parameters were chosen for logistic regression, which was then employed to compute the probability of sinkhole detection; a cutoff value was back-calculated such that the sinkhole susceptibility map well predicted the reported sinkhole boundaries. According to the results of the LR model, the optimal cutoff value was calculated to be 0.13, and the area under the curve (AUC) of the receiver operating characteristic curve (ROC) was 0.90, indicating the model is reliable for the study area. For those identified sinkholes, the geometric characteristics (e.g., depth, length, area, and volume) were computed.

In this study, five microbes were employed to precipitate calcite in cohesionless soils. Four microbes were selected from calcite-precipitating microbes isolated from calcareous sand and limestone cave soils, with Sporosarcina pasteurii ATCC 11859 (standard strain) used as a control. Urease activities of the four microbes were higher than that of S. pasteurii. The microbes and urea–CaCl₂ medium were injected at least four times into cohesionless soils of two different relative densities (60% and 80%), and the amount of calcite precipitation was measured. It was found that the relative density of cohesionless soils significantly affects the amount of calcite precipitation and that there is a weak correlation between urease activity and calcite precipitation.

This paper investigates the effect of clay content on the shear strength of clay–sand mixtures. Bentonite and Jumunjin sand were mixed to prepare cla

In this study, mortar beams reinforced by shape memory alloy (SMA) fibers of NiTi and NiTiNb alloys were prepared to perform crack-repairing tests using three-point bending tests. The SMA fibers had a length of 30 mm, and their types were straight, dog-bone, and dog-bone with paper wrapping. For the bending tests, twelve types of mortar beams with the dimensions of 40 mm × 40 mm × 160 mm ( B × H × L ) were prepared. Half of them had a top steel reinforcement, and equal numbers of beams were assigned to the NiTi and NiTiNb fibers. Five SMA fibers were located at the bottom center of the beams along with an artificial crack of 10 mm depth and 1 mm thickness. Epoxy was used to fill the cracks to bond the cracked surfaces using injection, and a hot-gun was used to heat the SMA fibers in the cracks. The crack widths were measured before and after the cracks were repaired, and force–displacement curves were obtained to assess the flexural strength recovery ratio of the beams. It does not appear that the crack-closing capacity of SMA fibers is a crucial factor to recover the flexural strength in repaired beams. However, adequate application of epoxy is critical for repairing cracks, and the residual stress of SMA fibers seems to contribute to increase flexural strength of repaired beams. The residual stress of SMA fibers functions as prestress on mortar and delays the initiation of cracking.