Self-assembled monolayers (SAMs), molecular structures consisting of assemblies formed in an ordered monolayer domain, are revisited to introduce their various functions in electronic devices. SAMs have been used as ultrathin gate dielectric layers in low-voltage transistors owing to their molecularly thin nature. In addition to the contribution of SAMs as gate dielectric layers, SAMs contribute to the transistor as a semiconducting active layer. Beyond the transistor components, SAMs have recently been applied in other electronic applications, including as remote doping materials and molecular linkers to anchor target biomarkers. This review comprehensively covers SAM-based electronic devices, focusing on the various applications that utilize the physical and chemical properties of SAMs.
Thin-film transistors have been extensively developed due to their process merit: high compatibility with various substrates, large-area processes, and low-cost processes. Despite these advantages, most efforts for thin-film transistors still remain at the level of unit devices, so the circuit level for practical use needs to be further developed. In this regard, this review revisits digital and analog thin-film circuits using carbon nanotubes (CNTs), organic electrochemical transistors (OECTs), organic semiconductors, metal oxides, and two-dimensional materials. This review also discusses how to integrate thin-film circuits at the unit device level and some key issues such as metal routing and interconnection. Challenges and opportunities are also discussed to pave the way for developing thin-film circuits and their practical applications.
The active-matrix technology incorporates a transistor to exert precise control over each pixel within a pixel array, eliminating the issue of crosstalk between neighboring pixels that is prevalent in the passive-matrix approach. Consequently, the active-matrix method facilitates the realization of high-resolution arrays, and this inherent advantage has propelled its widespread adoption, not only in display applications but also in diverse sensor arrays from lab to industry. In this comprehensive review, we delve into instances of active-matrix arrays utilizing thin-film transistors (TFTs) that leverage emerging materials such as organic semiconductors, metal oxide semiconductors, two-dimensional materials, and carbon nanotubes (CNTs). Our examination encompasses a broad classification of active-matrix research into two main categories: (i) displays and (ii) sensors. We not only assess the performance of TFTs based on emerging materials within the active-matrix framework, but also explore the evolving trends and directions in active-matrix-based displays and sensors.
1 March 2023 in IEEE Transactions on Electron Devices
Introducing a contact charge injection layer at the interface between the contact electrode and active materials is considered crucial to obtain efficient charge injection behaviors in thin-film transistors (TFTs). Here, we investigate the effect of a small molecule contact charge injection layer through experimental results and theoretical calculations. We found limited electrical characteristics derived from contact resistance in C8-BTBT TFTs with C8-BTBT as the channel and Au as the electrode. We experimentally demonstrated that the limited electrical characteristics of C8-BTBT TFT can be improved by inserting dinaphtho[2,3-b: $2^{\prime} $ , $3^{\prime} $ -f]thieno [3,2-b] thiophene (DNTT), which has a low contact resistance at the junction with Au, as a charge injection layer. The results of improved contact properties through the DNTT charge injection layer were also consistent with the results of energy structural simulations. Furthermore, we verified the effect of the DNTT charge injection layer at the circuit level through improved noise margin characteristics in the complementary inverter composed of asymmetric charge injection layer TFT (ACIL-TFT) and a-indium gallium zinc oxide (IGZO) TFT.
Logic-in-memory (LIM) technology is an important technology that overcomes the bottleneck, a limitation of the von Neumann architecture. As described in previous reports, the LIM technology was fabricated with a resistive load inverter structure. However, there are some limitations due to the high-power consumption issue and low noise margin. As a result, the need for a LIM device with a complementary structure has emerged. Here, we propose a LIM architecture-based organic-inorganic complementary inverter circuit with a stable noise margin using a p-type floating-gate transistor memory (FGTM) and an n-type zinc-tin oxide (ZTO) thin-film transistor (TFT). We demonstrate that the output of the proposed complementary inverter circuit is determined according to the state of the FGTM memory.
7 June 2022 in IEEE Transactions on Nanotechnology
Ambipolar field-effect transistor (FET) capable of transporting both holes and electrons has the advantage of operating as both p-type and n-type with a single device depending on the voltage bias condition. Among transition metal dichalcogenides (TMDs), molybdenum diselenide (MoSe 2 ), which has ambipolar properties, exhibits n-type dominant electrical characteristics. As a result, a digital inverter implemented only using pristine MoSe 2 FETs exhibited asymmetric and limited output swing characteristics because of the difficulty in pull-up operation. Therefore, a method for improving the p-type characteristics of MoSe 2 is needed to implement a complementary metal–oxide–semiconductor (CMOS)-like digital inverter using only MoSe 2 . In this study, an n-type dominant MoSe 2 FET was adjusted to have p-type dominant characteristics through annealing process. Raman spectroscopy was used to compare the transistor with previous studies. Statistical analysis showed that the charge transport behavior was reproduced in multiple devices. The p-type enhanced MoSe 2 FET was applied as a pull-up transistor of a digital inverter to present the practicality of the annealing process to improve the p-type characteristics of the MoSe 2 FET. Eventually, a more symmetrical output swing and improved noise margin were achieved compared to a digital inverter composed of only n-type dominant MoSe 2 FETs.