We present a comprehensive review and outlook of silicon carbide (SiC) and gallium nitride (GaN) transistors available on the market for current and next-generation power electronics. Material properties and structural differences among GaN and SiC devices are first discussed. Based on the analysis of different commercially available GaN and SiC power transistors, we describe the state-of-the-art of these technologies, highlighting the preferential power conversion topologies and the key characteristics of each technological platform. Current and future fields of application for GaN and SiC devices are also reviewed. The article also reports on the main reliability aspects related to both technologies. For GaN HEMTs, threshold voltage stability, dynamic ON-resistance, and breakdown limitation are described, whereas for SiC MOSFETs the analysis also focuses on gate oxide failure and short-circuit (SC) robustness. Finally, we give an overview on the perspective of such materials in different fields of interest. An indication of possible future improvements and developments for both technologies is drawn. The requirements for hybrid converters, along with a careful optimization of performance and the use of innovative optimization tools, are underlined.
In this paper we present a comprehensive review and outlook of gallium nitride power devices for next-generation power electronics, with focus on the emerging automotive field. The analysis of different markets available GaN-on-Si HEMTs will draw the present state of this technology for power applications and automotive, highlighting the different available topologies and their key characteristics, together with a comparison with Si and SiC. Furthermore, we will investigate the present and future of GaN devices in the different building blocks composing an automotive system (power train inverter, on board charger, off board charger, DC/DC converters, ADAS, infotainment). In the end, we will highlight the present reliability issues and limits of GaN-on-Si power devices (threshold voltage instabilities, dynamic on-resistance, breakdown limitation).
13 August 2024 in IEEE Transactions on Power Electronics
We analyzed the threshold-voltage dynamic instabilities induced by off -state stress in pseudo-vertical GaN-on-Si Trench mosfet s (TMOS). Extensive measurements revealed that off -state stress experiments induce a progressive increase of threshold voltage ( VT ), that is fully recoverable only after high-temperature cycles, so that it can appear as permanent degradation at room temperature. VT increase is found to be strongly affected by drain bias and negligibly influenced by gate bias (below threshold). Activation energy ( EA ) extracted from high-temperature VT recovery experiments was determined to be ≈1 eV. We further characterized pseudo-vertical p–n junction diodes fabricated onto the same wafer as the TMOS's by means of capacitance isothermal spectroscopy. This experiment revealed depletion capacitance ( C DEP ) instabilities with the same EA as that characterizing the VT instability, leading to the conclusion that trap states present in the epitaxy are the cause of both observations. Numerical device simulations guided the physical interpretation of the observed phenomena, i.e., donor traps at 1 eV from the conduction band and localized in the p- layer lead to both VT and C DEP instabilities in the TMOS and in the p–n diode, respectively, by dynamically modulating the effective p -type doping density in the former and the effective depletion layer width in the latter.
We demonstrate that exposure to positive gate bias can favor a fast recovery of the threshold voltage variation induced by off-state stress, in p-GaN gate high electron mobility transistors. Two process splits were investigated, having different Schottky barriers at the metal/p-GaN junction. Results indicate that: (a) drain stress may result in significant threshold voltage increase; (b) devices with sufficiently high gate leakage current show an immediate recovery after gate turn-on, resulting in stable operation in actual applications. The contribution of leakage current is demonstrated, based on recovery experiments at different voltages and for the same rate of hole injection from the gate.