Graphene oxide (GO) is an advanced additive improving the properties of various types of coatings and intensifying the deposition process. In this work, GO is used as an additive to the traditional phosphating solution of the widely used Russian low-carbon steel 08YU (DC04). The anticorrosion properties of the obtained phosphate coatings were investigated in neutral (0.5 M NaCl) and acidified (0.1 M Na2SO4 + 0.02 M H2SO4) aqueous solutions. Increasing the GO concentration in the phosphating solution to 0.3 g/L was found to improve the anticorrosion properties of the phosphate coatings in neutral NaCl solutions. At the same time, in acidified Na2SO4 solutions, the corrosion rate of 08YU steel with phosphate coatings increased as a function of the GO concentration. It is assumed that a possible reason for various corrosive behavior is the influence of the GO plates distributed in the coating on the rate of the oxygen or hydrogen reduction reactions.
In this work, the physical properties of Fe48Cr15Mo14C15B6Y2 alloy in liquid state at high temperature are studied. It was observed that the basic physical characteristics of the alloy, such as viscosity, electrical resistivity, and density, decrease with an increase of the temperature to 1700 °C. An abnormal increasing rate of viscosity for Fe48Cr15Mo14C15B6Y2 alloy in the temperature range from 1360 to 1550 °C was noted. The measurement of the electrical resistivity and density did not reveal any anomalies in the same temperature range.