The crystallographic properties of two titanium dioxide (TiO₂) photocatalysts, P25, and commercial C1-TiO₂ reactive grade, were analyzed by X-ray diffraction (XRD) and the band-gap was calculated with UV–Vis spectrometry with integration sphere. Then, their performance was tested in the degradation of 6-mercaptopurine (6-MP) by heterogeneous photocatalysis with solar radiation under different pH conditions and the addition of hydrogen peroxide (H₂O₂); the degradation efficiency was monitored by UV–Vis spectrophotometry. The XRD analysis showed that both photocatalysts studied have anatase phase, while only P25 contains rutile; the band gap values were lower, in both catalysts, than those reported for catalysts obtained by the sol-gel method. With both photocatalysts, degradation experiments showed efficiency greater than 98% in experiments in the presence of H₂O₂ regardless of pH. The properties of the photocatalysts, along with the data obtained from the experimentation, helped determine the best semiconductor for the degradation of 6-MP with these operating conditions in this work.

β-Glucosidase is part of the cellulases and is responsible for degrading cellobiose into glucose, a compound that can be used to produce biofuels. However, the use of the free enzyme makes the process more expensive. Enzyme immobilization improves catalytic characteristics and supports, such as zeolites, which have physical-chemical characteristics and ion exchange capacity that have a promising application in the biotechnological industry. This research aimed to immobilize by adsorption a recombinant β-glucosidase from Trichoderma reesei, obtained in Escherichia coli BL21 (DE3), in a commercial zeolite. A Box Behnken statistical design was applied to find the optimal immobilization parameters, the stability against pH and temperature was determined, and the immobilized enzyme was characterized by SEM. The highest enzymatic activity was determined with 100 mg of zeolite at 35 °C and 175 min. Compared to the free enzyme, the immobilized recombinant β-glucosidase presented greater activity from pH 2 to 4 and greater thermostability. The kinetic parameters were calculated, and a lower K_M value was obtained for the immobilized enzyme compared to the free enzyme. The obtained immobilization parameters by a simple adsorption method and the significant operational stability indicate promising applications in different fields.

Phenol is used in the manufacturing process of phenolic resins from which residues remain that must be sent for confinement. For that reason, in this study, the wastewater of a resin factory was analyzed to isolate the bacteria present, identify them by molecular methods and finally evaluate their impact on bioremediation treatment. A total of 15 bacteria were isolated, of these, eight belong to the genus Bacillus spp. All bacteria were individually multiplied and inoculated in clusters in 15 L reactors which were carefully monitored for pH, electrical conductivity, chemical oxygen demand and temperature. The acquired data were analyzed using ANOVA with repeated measurements. The first test revealed that native bacterial communities reduce the phenol content by up to 20% and COD by 49%, which is significant with respect to the reactor not being inoculated with bacteria. Furthermore, when a mathematical model was applied to the reactors, it was shown that the bacteria require an adaptation time of approximately 100 h. A second test where the inoculation was interspersed with the addition of lime as a flocculant showed that, even though the reduction in phenol and COD was lower than in the previous test, the difference between treatments and control is statistically significant (α ≤ 0.05).

The final step in the treatment of municipal wastewater is disinfection, which is required to inactivate microorganisms that have survived after treatment. Chlorine and chloramines are widely used disinfectants in wastewater treatment plants (WWTP); however, the use of chlorine as a disinfectant presents several problems. In the present research, solar disinfection and photocatalytic disinfection processes have been applied to inactivate the fecal coliform microorganisms that are present in municipal wastewater treated by activated sludge in a WWTP. A 2 × 3 × 2 factorial design was applied. The first factor was the process: solar disinfection or photocatalysis; the second was initial pH: 5, 7.5 and 9; the third was the presence or absence of a H₂O₂ dose of 1 mMol added at the beginning of the process. The data from experimentation were compared to predictions from different inactivation kinetic models (linear, linear + shoulder, linear + tail, Weibull and biphasic). The results show that H₂O₂ addition plays an important role in the process and that disinfection does not always follow a linear reaction model. When related to radiation, it becomes clear that the accumulated radiation dose, rather than the time, should be considered the most important factor in the solar disinfection process.

Access to drinking water is a human right recognized by the United Nations. It is estimated that more than 2.1 billion people lack access to drinking water with an adequate microbiological quality, which is associated to 80% of all diseases, as well as with millions of deaths caused by infections, especially in children. Water disinfection technologies need a continuous improvement approach to meet the growing demand caused by population growth and climate change. Heterogeneous photocatalysis with semiconductors, which is an advanced oxidation process, has been proposed as a sustainable technology for water disinfection, as it does not need addition of any chemical substance and it can make use of solar light. Nevertheless, the technology has not been deployed industrially and commercially yet, mainly because of the lack of efficient reactor designs to treat large volumes of water, as most research focus on lab-scale experimentation. Additionally, very few applications are often tested employing actual sunlight. The present work provide a perspective on the operation trends and advances of solar heterogeneous photocatalytic reactors for water disinfection by systematically analyzing pertaining literature that made actual use of sunlight, with only 60 reports found out of the initially 1044 papers detected. These reports were discussed in terms of reactor employed, photocatalyst used, microorganism type, overall disinfection efficiency, and location. General prospects for the progression of the technology are provided as well.