Residual oil from babassu (Orbignya sp.), a low-cost raw material, was used in the enzymatic esterification for biodiesel production, using lipase B from Candida antarctica (Novozym^® 435) and ethanol. For the first time in the literature, residual babassu oil and Novozym^® 435 are being investigated to obtain biodiesel. In this communication, response surface methodology (RSM) and a central composite design (CCD) were used to optimize the esterification and study the effects of four factors (molar ratio (1:1–1:16, free fatty acids (FFAs) /alcohol), temperature (30–50 °C), biocatalyst content (0.05–0.15 g) and reaction time (2–6 h)) in the conversion into fatty acid ethyl esters. Under optimized conditions (1:18 molar ratio (FFAs/alcohol), 0.14 g of Novozym^® 435, 48 °C and 4 h), the conversion into ethyl esters was 96.8%. It was found that after 10 consecutive cycles of esterification under optimal conditions, Novozym^® 435 showed a maximum loss of activity of 5.8%, suggesting a very small change in the support/enzyme ratio proved by Fourier Transform Infrared (FTIR) spectroscopy and insignificant changes in the surface of Novozym^® 435 proved by scanning electron microscopy (SEM) after the 10 consecutive cycles of esterification.

Among the many biological entities employed in the development of biosensors, enzymes have attracted the most attention. Nanotechnology has been fostering excellent prospects in the development of enzymatic biosensors, since enzyme immobilization onto conductive nanostructures can improve characteristics that are crucial in biosensor transduction, such as surface-to-volume ratio, signal response, selectivity, sensitivity, conductivity, and biocatalytic activity, among others. These and other advantages of nanomaterial-based enzymatic biosensors are discussed in this work via the compilation of several reports on their applications in different industrial segments. To provide detailed insights into the state of the art of this technology, all the relevant concepts around the topic are discussed, including the properties of enzymes, the mechanisms involved in their immobilization, and the application of different enzyme-derived biosensors and nanomaterials. Finally, there is a discussion around the pressing challenges in this technology, which will be useful for guiding the development of future research in the area.

Several studies have shown the development of electrochemical biosensors based on enzymes immobilized in metal–organic frameworks (MOFs). Although enzymes have unique properties, such as efficiency, selectivity, and environmental sustainability, when immobilized, these properties are improved, presenting significant potential for several biotechnological applications. Using MOFs as matrices for enzyme immobilization has been considered a promising strategy due to their many advantages compared to other supporting materials, such as larger surface areas, higher porosity rates, and better stability. Biosensors are analytical tools that use a bioactive element and a transducer for the detection/quantification of biochemical substances in the most varied applications and areas, in particular, food, agriculture, pharmaceutical, and medical. This review will present novel insights on the construction of biosensors with materials based on MOFs. Herein, we have been highlighted the use of MOF for biosensing for biomedical, food safety, and environmental monitoring areas. Additionally, different methods by which immobilizations are performed in MOFs and their main advantages and disadvantages are presented.

In this study, a Taguchi experimental design was used for optimzing the immobilization of the lipase Eversa^® Transform 2.0 (EVS) onto a hybrid support consisting of chitosan (CHI) and agarose (AGA), with glutaraldehyde (GLU) used as the support activator. The biocatalyst obtained was characterized by X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetry (TGA), Energy Dispersive Spectroscopy (EDS), and Scanning Electron Microscopy (SEM). The optimized reaction conditions (60 min, 5 mM ionic strength, 1% GLU concentration, and 5 mg protein load per g of support) resulted in a highly active biocatalyst (74.39 ± 0.48 U/g) and delivered an immobilization yield of 74.20 ± 0.28%. The biocatalyst produced was observed to lose only 15.3% of its activity after 61 days of storage. The activity was also observed to increase by 96.70% ± 0.76, 27.34% ± 2.34, and 84.35% ± 1.68 in the presence of the organic solvents hexane, cyclohexane, and methanol, respectively. Additionally, the byocatalist showed more pronounced activity at temperatures above 50 °C and was still able to retain approximately 30% of it at 70 °C. These values were found to be higher at alkaline pHs, as the activity of Eversa^® 2.0 Transform saw an increase of up to 140% at pH 9. The desorption tests performed did not reveal any enzymatic detachment from the support. The novel biocatalyst also showed promising ester-lubricating properties. Furthermore, the in silico study revealed a binding affinity of −5.1 kcal/mol between oleic acid and the enzyme, suggesting that the combination of the substrate and the lipase was more stable and therefore, suitable for esterification. GRAPHICAL ABSTRACT

The growing demand for sustainable energy sources has driven the transition to renewable energy, integrating economic development and environmental preservation. In this context, innovative strategies are essential to strengthen the competitiveness of the energy sector by promoting efficiency, innovation, and sustainability. This study adopts a qualitative approach, which is crucial for deepening analyses in the field of renewable energy and economic competitiveness. To conduct this research, two fundamental methodological procedures were employed: a literature review and documentary research. The general objective of this study is to analyze how renewable energy can enhance economic competitiveness through innovative strategies that promote sustainability and socioeconomic development. The analysis of public policies revealed that well-structured government incentives are essential for fostering investments and ensuring the expansion of renewable energy participation in the global energy matrix.