The slow hydrogenation/dehydrogenation kinetics and high thermodynamic stability of the Mg–H bond are the two major limitations for the large-scale utilization of MgH2. In this review, we introduce the catalytic mechanism of 3d and 4d transition metal (TM) on the hydrogen sorption properties of Mg/MgH2. The relative contribution of interatomic interactions to the thermodynamic stability of the TM-substituted MgH2 system is discussed. A synergy effect between the electronegativity and the radius of the TM element is proposed to explain the charge transfer process between TM and H in the TM-substituted MgH2 system. The catalytic mechanism of TM nearby the surface of Mg is more complicated than that in the volume of Mg, as the surface-doped TM can experience more options for doping sites, leading to the hindrance effect and causing various contributions of the d band center to the dissociation of hydrogen molecules and the diffusion of hydrogen atoms nearby the surface of Mg. In terms of the catalytic mechanism of TM for hydrogen sorption kinetics of Mg/MgH2, we particularly focused on the “hydrogen pump” effect existing in the Mg–TM–H system. Other mechanisms, such as a possible catalytic mechanism of TM for the hydrogen sorption properties of nano-sized freestanding Mg/MgH2, were also presented.
Hydrogen separation membranes are one of the most promising technologies for hydrogen purification. The development of high-entropy alloys (HEAs) for hydrogen separation membranes is driven by a “cocktail effect” of elements with different hydrogen affinities to prevent hydride formation and retain high permeability due to the single-phase BCC structure. In this paper, equimolar and non-equimolar Nb-Ni-Ti-Zr-Co high entropy alloys were fabricated by arc melting. The microstructure and phase composition of the alloys were analyzed by scanning electron microscopy and X-ray diffraction, respectively. The hydrogen permeation experiments were performed at 300–500 °C and a hydrogen pressure of 4 bar. In order to estimate the effect of composition and lattice structure on hydrogen location and diffusivity in Nb-Ni-Ti-Zr-Co alloy, ab initio calculations of hydrogen binding energy were performed using virtual crystal approximation. It was found that Nb-enriched and near equimolar BCC phases were formed in Nb20Ni20Ti20Zr20Co20 HEA while Nb-enriched BCC and B2-Ni(Ti, Zr) were formed in Nb40Ni25Ti18Zr12Co5 alloy. Hydrogen permeability tests showed that Nb20Ni20Ti20Zr20Co20 HEA shows lower activation energy and higher permeability at lower temperatures as well as higher resistance to hydrogen embrittlement compared to Nb40Ni25Ti18Zr12Co5 alloy. The effect of composition, microstructure and hydrogen binding energies on permeability of the fabricated alloys was discussed.
The study of hydrogen storage properties of Mg-based thin films is of interest due to their unique composition, interface, crystallinity, and high potential for use in hydrogen-storage systems. Alloying Mg with Al leads to the destabilization of the magnesium hydride reducing the heat of reaction, increases the nucleation rate, and decreases the dehydriding temperature. The purpose of our study is to reveal the role of the aluminum atom addition in hydrogen adsorption and accumulation in the Mg-H solid solution. Ab initio calculations of aluminum and hydrogen binding energies in magnesium were carried out in the framework of density functional theory. Hydrogen distribution and accumulation in Mg and Mg-10%Al thin films were experimentally studied by the method of glow-discharge optical emission spectroscopy and using a hydrogen analyzer, respectively. It was found that a hydrogen distribution gradient is observed in the Mg-10%Al coating, with more hydrogen on the surface and less in the bulk. Moreover, the hydrogen concentration in the Mg-10%Al is lower compared to Mg. This can be explained by the lower hydrogen binding energy in the magnesium-aluminum system compared with pure magnesium.
Radiation damage is one of the significant factors limiting the operating time of many structural materials working under extreme conditions. One of the promising directions in the development of materials that are resistant to radiation damage and have improved physical and mechanical properties is the creation of nanoscale multilayer coatings (NMCs). The paper is devoted to the experimental comprehension of changes in the defect structure and mechanical properties of nanoscale multilayer coatings (NMCs) with alternating layers of Zr and Nb under irradiation. Series of Zr/Nb NMCs with different thicknesses of individual layers were fabricated by magnetron sputtering and subjected to H+ irradiation. The evolution of structure and phase states, as well as the defect state under proton irradiation, was studied using the methods of high-resolution transmission electron microscopy (HRTEM), X-ray diffraction analysis (XRD), glow discharge optical emission spectroscopy (GDOES), and positron annihilation spectroscopy (PAS). The layer-by-layer analysis of structural defects was carried out by Doppler broadening spectroscopy (DBS) using a variable-energy positron beam. To estimate the binding energy and the energy paths for the hydrogen diffusion in Zr/Nb NMCs, calculations from the first principles were used. When the thickness of individual layers is less than 25 nm, irradiation causes destruction of the interfaces, but there is no significant increase in the defect level, the S parameter (open volume defects amount) before and after irradiation is practically unchanged. After irradiation of NMC Zr/Nb with a thickness of layers 50 and 100 nm, the initial microstructure is retained, and the S parameter is significantly reduced. The GDOES data reveal the irregular H accumulation at the interface caused by significant differences in H diffusion barriers in the bulk of Zr and Nb multilayers as well as near the interface’s region.
Nanoscale multilayer coating (NMC) based on Zr/Nb layers (100/100 nm) before and after H+ irradiation was investigated by combining experimental techniques with first-principles calculations. Detailed studies of structural and phase state and defect structure of Zr/Nb NMC were performed using methods of transmission electron microscopy, X-ray structural analysis, glow discharge optical emission spectrometry, and the Doppler broadening spectroscopy using variable energy positron beam. The first-principles calculations of binding energies for hydrogen in metal Zr/Nb layers was carried out by the pseudopotential method within the density functional theory framework. First-principles calculations and experimental data indicate the presence of macro- and microstrains predominantly in the zirconium layers of Zr/Nb NMC. The main feature of the studied Zr/Nb NMC is the predominant hydrogen localization in Zr layers near the interfaces. The annihilation of positrons is shown to occur mainly in the Zr layers in the vicinity of the interface.