Wearing face masks, use of respirators, social distancing, and practicing personal hygiene are all measures to prevent the spread of the coronavirus disease (COVID-19). This pandemic has revealed the deficiency of face masks and respirators across the world. Therefore, significant efforts are needed to develop air filtration and purification technologies, as well as innovative, alternative antibacterial and antiviral treatment methods. It has become urgent—in order for humankind to have a sustainable future—to provide a feasible solution to air pollution, particularly to capture fine inhalable particulate matter in the air. In this review, we present, concisely, the air pollutants and adverse health effects correlated with long- and short-term exposure to humans; we provide information about certified face masks and respirators, their compositions, filtration mechanisms, and the variations between surgical masks and N95 respirators, in order to alleviate confusion and misinformation. Then, we summarize the electrospun nanofiber-based filters and their unique properties to improve the filtration efficiency of face masks and respirators.

The present research investigates the application of the green method to produce nanocomposites. The CuO/PET fiber nanocomposite can be prepared in two ways. The first way involves the application of the electrospinning technique by which waste plastic cups of polyethylene terephthalate (PET) are converted into nanofibers. In the second way, the copper nanoparticle (CuONPs) is synthesized with the natural capped plant extract of sumac (Rhus Coriaria L., family Anacardiaceae) and the CuONPs are then combined as a filler with the PET nanofiber using a cross-linked solvent. The X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersion spectroscopy (EDS), and map elements distribution can be applied to investigate the surface modification and alteration of the composite nanofiber morphology. The collected data show that the produced CuO/PET nanocomposites have a high surface area, well distribution of elements, magnificent shape, and stable dispersion state. Furthermore, the CuO/PET nanocomposites are considered as an efficient photocatalytic removal of the toxic methylene blue dye (MB) in aqueous solutions. The results of the present study demonstrate that the photocatalytic efficiency for removing MB dye is achieved in a short time using a low-intensity irradiation ultraviolet light.

A membrane composed of polyethylene terephthalate nanofiber and multi-walled carbon nanotubes (PET NF-MWCNTs) composite is used to adsorb methylene blue (MB) dye from an aqueous solution. Scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction techniques are employed to study the surface properties of the adsorbent. Several parameters affecting dye adsorption (pH, MB dye initial concentration, PET NF-MWCNTs dose, and contact time) are optimized for optimal removal efficiency (R, %) by using the Taguchi L25 (5⁴) Orthogonal Array approach. According to the ANOVA results, pH has the highest contributing percentage at 71.01%, suggesting it has the most significant impact on removal efficiency. The adsorbent dose is the second most affected (12.08%), followed by the MB dye initial concentration of 5.91%, and the least affected is the contact time (1.81%). In addition, experimental findings confirm that the Langmuir isotherm is well-fitted, suggesting a monolayer capping of MB dye on the PET-NF-MWCNT surface with a maximum adsorption capacity of 7.047 mg g⁻¹. Also, the kinetic results are well-suited to the pseudo-second-order model. There is a good agreement between the calculated (q_e) and experimental values for the pseudo-second-order kinetic model.