In the Earth observation mission of the synthetic aperture radar (SAR), wide swath can be used to complete global monitoring in a short time and high resolution can provide rich detailed information about the feature space and prominent structure and texture. However, the traditional single-channel classical SAR system cannot meet high-resolution and wide-swath (HRWS) imaging demand due to the constraint of minimum antenna area. Fortunately, this fundamental limitation can be overcome by using multiple receive subapertures in combination with advanced digital beamforming (DBF) technique. DBF in elevation can provide high gain and better system performance and has recently gained much attention in the field of SAR imaging. This article presents a 16-channel in elevation airborne X-band DBF-SAR system with 500-MHz bandwidth, characterized by high speed data acquisition and storage, as a test bed to provide the technical reserves and support for a future spaceborne DBF-SAR system in China. The hardware configuration of this system is designed according to a realistic flight mission. To verify the feasibility and operability of this advanced 16-channel DBF-SAR system, an outfield airborne flight experiment was successfully conducted in eastern Guangdong Province in November 2019. Meanwhile, considering the inevitable channel mismatch from airborne system, a precise strategy as well as the underlying signal processing is proposed to process the experiment data. In addition to the channel mismatch due to the topographic height, the Scan-On-Receive (SCORE) pattern loss (SPL) is also an inherent factor, which will deteriorate the output SNR in final SAR images. Therefore, this article also implements a quantitative assessment of SPL combined with the practical flight parameters and the real airborne data. Finally, the corresponding processing results are presented and analyzed in detail. The practical SNR improvement of 11.23 dB emphasize that DBF technology can significantly improve the quality of SAR images and will make an essential contribution to next generation of HRWS technology for environment monitoring.

Synthetic aperture radar (SAR) systems are active imaging sensors that provide all-weather, day-and-night high-resolution radar images [1], [2], [3], [4], [5], [6], [7], [8], [9]. Moreover, SAR images can provide multidimensional information, including backscattering, polarization, and coherence information. With these unique advantages, SAR systems have been used in a wide range of applications, such as topographic mapping, geological exploration, vegetation characterization, forestry monitoring, disaster assessment, marine applications, and military reconnaissance.

Digital beamforming (DBF) with scan-on-receive (SCORE) technique in elevation is a powerful technique that enables a spaceborne synthetic aperture radar (SAR) to achieve high-resolution wide swath (HRWS) imaging. In the spaceborne DBF-SAR system, sampling signals from each channel are weighted by weights generated by a digital signal processing system in real-time. However, the contradiction between the shortage of spaceborne hardware resources and resource demand of the multichannel real-time signal processing increases the difficulty of system design. In order to solve this problem, a novel weight generator and an improved intermediate frequency (IF) DBF real-time processing architecture are proposed in this article. By taking advantage of the special properties of the SCORE algorithm, the proposed weight generator calculates weights using a linear polynomial algorithm. The simulation result shows that a low-order approximation can achieve high performance. The proposed generator can correct multichannel amplitude and phase error at a low cost on hardware resources. The effectiveness of the proposed method is verified by experiments with a raw data processing instance of an X-band 16 channels DBF-SAR.

Due to the atmospheric turbulence, the motion trajectory of airborne very high resolution (VHR) synthetic aperture radars (SARs) is inevitably affected, which introduces range-variant range cell migration (RCM) and aperture-dependent azimuth phase error (APE). Both types of errors consequently result in defocused images, as residual range- and aperture-dependent motion errors are significant in VHR-SAR images. Nevertheless, little work has been devoted to the range-variant RCM auto-correction and aperture-dependent APE auto-correction. In this paper, a precise motion compensation (MoCo) scheme for airborne VHR-SAR is studied. In the proposed scheme, the motion error is obtained from inertial measurement unit and SAR data, and compensated for with respect to both range and aperture. The proposed MoCo scheme compensates for the motion error without space-invariant approximation. Simulations and experimental data from an airborne 3.6 GHz bandwidth SAR are employed to demonstrate the validity and effectiveness of the proposed MoCo scheme.

High spatial resolution imaging in synthetic-aperture radar (SAR) can provide accurate monitoring capacity and has been gaining great attention recently in the fields of military and civilian. Apparently, the slant range resolution of the SAR system depends on the radar operating bandwidth. Currently, the large bandwidth signal synthesizing technology of the stepped frequency chirp signal waveform is highly practical for achieving high spatial resolution. However, the system structure and the corresponding signal processing technology become more complex. In order to verify the feasibility and operability of the large full-bandwidth system, a 3.6-GHz full-bandwidth airborne experimental SAR system operating at X-band, featured by full-bandwidth transmitting and receiving, has been designed by the Department of Space Microwave Remote Sensing System, Institute of Electronics, Chinese Academy of Sciences, as a test bed for the development and implementation of the future spaceborne realizations. For this large full-bandwidth SAR system, in addition to the hardware resource, the motion compensation (MOCO) is an urgent problem. The improvement of spatial resolution will aggravate the effect of motion errors. In order to focus the SAR images accurately, this article presents a technical approach by utilizing the differential global positioning system (DGPS) technology to improve the position accuracy of the inertial measurement unit device. Meanwhile, considering the significant deviation of range cell migration correction (RCMC) due to the residual range-variant errors, this article proposes an accurate MOCO strategy with DGPS-supported to implement the second-order MOCO, space-variant residual range envelope, and space-variant residual phase error in azimuth before RCMC. Finally, this article presents the outfield experiment and reports the corresponding analysis and processing results of an outfield flight experiment successfully conducted in March 2019.

Synthetic aperture radar (SAR) is a high-resolution imaging radar. With the deteriorating electromagnetic environment, SAR systems are susceptible to various forms of electromagnetic interference, including deception jamming. This jamming notably impacts SAR signal processing and subsequently worsens the quality of acquired images. Chaotic frequency modulation (CFM) signals could effectively counteract deception jamming. Nevertheless, due to the inadequate band-limited performance of CFM signals, higher oversampling factors are needed for achieving optimal low sidelobe levels, leading to increased system costs and excessively high data rates. Additionally, not all chaotic sentences meet the CFM signal requirements. In response, this paper proposes a novel signal modulation method called chaotic-nonlinear frequency modulation (C-NLFM) that enhances band-limited performance. The optimum parameters for C-NLFM signals are selected using the particle swarm optimization (PSO) algorithm. In this way, C-NLFM signals attain ideal low sidelobe levels even when faced with reduced oversampling factors. Meanwhile, this chaotic coding mode retains its capability to effectively suppress deception jamming. Moreover, C-NLFM signals demonstrate versatility in adapting to various chaotic sequences, thereby enhancing their flexibility to modify the signals as required. Through comprehensive simulations, data analysis, and a semi-physical experiment, the effectiveness and superiority of this proposed method have been confirmed.