The challenging problem to realize high-resolution and wide-swath (HRWS) synthetic aperture radar (SAR) imaging is the ambiguity suppression in the azimuth and range directions. According to the spatial angle difference of each ambiguity component, the current technical approach is to design the spatial filter for achieving the ambiguity suppression based on the 2-D multichannel system. Along with the increasing of HRWS imaging requirements, the number of system channels also gradually increase and further result in the complex structure design of the phased array antenna system. Meanwhile, the traditional phased array antenna cannot effectively control the direction of the transmit beampattern in range. Unlike the traditional phased array, frequency diverse array (FDA) employs a small-frequency increment across the whole array elements and forms the range-angle-dependent S-shaped transmit beampattern, which can be utilized to separate the different range ambiguous region. Considering the above-mentioned characteristics and the range periodicity problem of transmit beampattern, this letter devises a scheme for spaceborne SAR HRWS imaging mode in the view of transmit beampattern utilizing 2-D planar array, i.e., the FDA in azimuth for removing the range nonperiodicity ambiguity and the conventional phased array in elevation for removing the range periodicity ambiguity. Simulation results have been presented to validate the effectiveness of the proposed scheme.

In the Earth observation mission of the synthetic aperture radar (SAR), wide swath can be used to complete global monitoring in a short time and high resolution can provide rich detailed information about the feature space and prominent structure and texture. However, the traditional single-channel classical SAR system cannot meet high-resolution and wide-swath (HRWS) imaging demand due to the constraint of minimum antenna area. Fortunately, this fundamental limitation can be overcome by using multiple receive subapertures in combination with advanced digital beamforming (DBF) technique. DBF in elevation can provide high gain and better system performance and has recently gained much attention in the field of SAR imaging. This article presents a 16-channel in elevation airborne X-band DBF-SAR system with 500-MHz bandwidth, characterized by high speed data acquisition and storage, as a test bed to provide the technical reserves and support for a future spaceborne DBF-SAR system in China. The hardware configuration of this system is designed according to a realistic flight mission. To verify the feasibility and operability of this advanced 16-channel DBF-SAR system, an outfield airborne flight experiment was successfully conducted in eastern Guangdong Province in November 2019. Meanwhile, considering the inevitable channel mismatch from airborne system, a precise strategy as well as the underlying signal processing is proposed to process the experiment data. In addition to the channel mismatch due to the topographic height, the Scan-On-Receive (SCORE) pattern loss (SPL) is also an inherent factor, which will deteriorate the output SNR in final SAR images. Therefore, this article also implements a quantitative assessment of SPL combined with the practical flight parameters and the real airborne data. Finally, the corresponding processing results are presented and analyzed in detail. The practical SNR improvement of 11.23 dB emphasize that DBF technology can significantly improve the quality of SAR images and will make an essential contribution to next generation of HRWS technology for environment monitoring.

Digital beamforming (DBF) with Scan-On-Receive (SCORE) in elevation is a powerful technique for spaceborne synthetic aperture radar (SAR) to achieve high-resolution wide-swath (HRWS) images. DBF in spaceborne SAR should be implemented in real-time to reduce the volume of the downloaded data. Current digital beamformers in SAR systems usually use phase shift instead of a time delay network to ensure real-time implementation. However, conventional phase shift DBF SAR with narrow array bandwidth is not applicable for broadband signals. The beam steering deviation as a function of frequency is obvious for signals with large fractional bandwidth, which appears as a phenomenon of frequency dispersion. If the signal bandwidth is wider than the array bandwidth, frequency dispersion can significantly deteriorate the signal-to-noise ratio (SNR) and must be well relieved. This article analyzes the frequency dispersion in DBF SAR and proposes an innovative DBF-SCORE scheme with specially designed scalloped beam. The proposed digital scalloped beamforming (DSBF) scheme is effective in relieving the influence of frequency dispersion in DBF SAR. Theoretical analysis and simulation results validate the effectiveness of the proposed scheme. The proposed DSBF scheme gives practical solution to the problem of frequency dispersion in broadband DBF SAR, which makes DBF-SCORE a more practical technique for future spaceborne HRWS SAR.

Multi-channel synthetic aperture radar (SAR) in azimuth can overcome the minimum-antenna-area constraint of the conventional SAR in high-resolution and wide-swath (HRWS) imaging. However, the SAR system suffers from amplitude and phase mismatch among channels and nonideal antenna pattern, which will result in azimuth ambiguity and ghost targets in the final image. Therefore, taking the nonbandlimited signal and channel errors into account, a practical azimuth ambiguity-to-signal ratio (AASR) model of multi-channel SAR system is established. Meanwhile, the baseband Doppler centroid (DC) frequency related to channel errors also has an influence on image quality. Then, an effective method is proposed to calculate the baseband DC frequency according to the jumping points of the channel phase errors estimate. Subsequently, considering the effect of azimuth antenna pattern (AAP), a corresponding relationship between the ideal steering vectors and the signal subspace from the decomposing covariance matrix is established. After that, based on the uniqueness of the signal subspace and the correct corresponding relationship, an accurate method is proposed to estimate the channel phase errors by minimizing the minimum mean square error (MMSE) of the signal subspace. Finally, an accurate multi-channel SAR imaging diagram is shown to effectively mitigate the azimuth ambiguous energy caused by channel errors. Simulation and real data experiments, including four channel airborne SAR data with a bandwidth of 210 MHz and the Chinese Gaofen-3 dual receiving channel (DRC) spaceborne SAR data, validate the effectiveness of the proposed calibration method, particularly in low signal-to-noise ratio (SNR).

Digital beamforming (DBF) with scan-on-receive (SCORE) technique in elevation is a powerful technique that enables a spaceborne synthetic aperture radar (SAR) to achieve high-resolution wide swath (HRWS) imaging. In the spaceborne DBF-SAR system, sampling signals from each channel are weighted by weights generated by a digital signal processing system in real-time. However, the contradiction between the shortage of spaceborne hardware resources and resource demand of the multichannel real-time signal processing increases the difficulty of system design. In order to solve this problem, a novel weight generator and an improved intermediate frequency (IF) DBF real-time processing architecture are proposed in this article. By taking advantage of the special properties of the SCORE algorithm, the proposed weight generator calculates weights using a linear polynomial algorithm. The simulation result shows that a low-order approximation can achieve high performance. The proposed generator can correct multichannel amplitude and phase error at a low cost on hardware resources. The effectiveness of the proposed method is verified by experiments with a raw data processing instance of an X-band 16 channels DBF-SAR.

Due to the atmospheric turbulence, the motion trajectory of airborne very high resolution (VHR) synthetic aperture radars (SARs) is inevitably affected, which introduces range-variant range cell migration (RCM) and aperture-dependent azimuth phase error (APE). Both types of errors consequently result in defocused images, as residual range- and aperture-dependent motion errors are significant in VHR-SAR images. Nevertheless, little work has been devoted to the range-variant RCM auto-correction and aperture-dependent APE auto-correction. In this paper, a precise motion compensation (MoCo) scheme for airborne VHR-SAR is studied. In the proposed scheme, the motion error is obtained from inertial measurement unit and SAR data, and compensated for with respect to both range and aperture. The proposed MoCo scheme compensates for the motion error without space-invariant approximation. Simulations and experimental data from an airborne 3.6 GHz bandwidth SAR are employed to demonstrate the validity and effectiveness of the proposed MoCo scheme.