In some geographically challenging areas (such as deserts, seas, and forests) where direct connectivity to a terrestrial network is difficult, space communication is the only option. In these remote locations, Internet of Space Things (IoST) applications can also be used successfully. In this paper, the proposed payload for IoST applications demonstrates how an Automatic Identification System (AIS) and a fire detection system can be used effectively. A space mission based on efficient and low-cost communication can use a constellation of nanosatellites to better meet this need. These two applications, which use a constellation of nanosatellites, can provide relevant university-level data in several countries as an effective policy for the transfer of space technology in an educational initiative project. To enhance educational participation and interest in space technology, this paper shares the lessons learned from the project feasibility study based on an in-depth design of a nanosatellite with several analyses (data budget, link budget, power budget, and lifetime estimation). Lastly, this paper highlights by experiments the development and application of a cost-effective sensor node for fire detection and the use of GPS to enable AIS capabilities in the IoST framework.
25 September 2020 in IEEE Journal on Miniaturization for Air and Space Systems
Microsatellites in LEO usually utilize amateur radio frequency to communicate with Ground Station. For communication with the earth, VHF/UHF frequency range is utilized in most of Microsatellites Telemetry Tracking Command subsystem. Communication is an only vital way for recognition CubeSat when it launches into its orbit, therefore this subsystem is required to design with very accurate Radio Frequency circuit, therefore this TTC subsystem has been implemented intelligently based on three separated PCBs, receiver, transmitter, and filters. This innovative procedures for implementation the TTC board give this opportunity that every component could operate and be simulate individually and malfunctioning is easier to detect. Eventually, frequency responses for every RF block-circuit investigated practically and an engineering CubeSat standard TTC board model is fabricated.
Asteroid mining offers vital sources for improving human lives and provides opportunities for interplanetary missions and space travel. There are many professional commercial space companies that are only investing billions of dollars on asteroids mining, but prior to that, one condition for asteroid mining could be planetary stations to refuel the pioneers’ spacecraft or human colonies on alien planets; hence, one of the vital sources for these purposes is water. Water can be harvested to split oxygen for breathing and hydrogen for refueling spaceships’ propulsions, and Earth-to-space water payload transporting is extremely expensive; therefore, discovering extraterrestrial water in outer space is economically beneficial. This paper presents a Lunar CubeSat Injector to deliver four 3U CubeSats into Low Lunar Orbit to make a constellation to identify locations of water sources on the Moon by using a THz heterodyne-spectrometer. In sum, this project can help scientists to recognize more water resources for those who will colonize the Moon and for those planning to go beyond it.
Technological advancements have revolutionized the space industry, facilitating deep space exploration using CubeSats. One objective is to locate potential life-support elements, such as water, on extraterrestrial planets. Water possesses a distinct spectral signature at 183 GHz, useful in remote sensing and environmental monitoring applications. Detecting this signature provides crucial information about water and ice presence and distribution on celestial bodies, aiding future exploration and colonization efforts. Mostly in space remote sensing uses corrugated horn antennae due to high gain and radiation patterns but fabrication of corrugated antenna is very challenging or even impossible in some cases. To ease this challenge, in our research we propose ideas to transform a corrugated horn antenna into a smooth-walled design by using MATLAB Cubic smoothing Splines algorithms. We compare simulation results between smooth-walled and corrugated antennas, and we can see some improvements in insertion losses, Voltage Standing Wave ratio (VSWR), and gain. We also manufactured this 183 GHz antenna using a commercially available 3D printer by utilizing Acrylonitrile Butadiene Styrene (ABS) material. The antenna surface was then coated with a thin layer of copper using conductive paint. In the end, we practically evaluate smooth-walled antenna functionality and compare it with the theriacal results. Validating the antenna’s functionality proposes a cost-effective and accessible production method to be used in a CubeSat engineering model or university students’ project.
15 April 2025 in IEEE Transactions on Geoscience and Remote Sensing
For satellite brightness temperature images, researchers are constantly pursuing higher resolutions to obtain more detailed meteorological information. In this article, a novel deep-learning-based modeling approach, named zero-sample gradient guidance spatial resolution enhancement (ZSGRE), is developed explicitly for microwave radiometers. The detailed model, including mathematical derivation and key parameters, is presented. Subsequently, the proposed approach is applied in four scenarios: synthetic scene, simulated geographical brightness temperature, practical measurement of microwave radiometer in Fengyun-3D (FY-3D), and a cyclone analysis on the Atlantic. Compared with other methods, the proposed ZSGRE method improves 2.51% of structural similarity (SSIM), enhances 2.3 dB of peak signal-to-noise ratio (PSNR), and decreases 15.8% of instantaneous field of view (IFOV). Such applications demonstrate ZSGRE’s significant performance: zero-sample preparation and spatial resolution enhancement.
Every day 80,000 weather balloons are launched to the Earth’s upper atmosphere with meteorology payloads to provide accurate meteorological data. Meteorological data could be used for airport stations and weather stations. Meanwhile, there are many remote sensing satellites above the Earth’s atmosphere, but balloons are still essential due to increased weather prediction accuracy. Many balloons launch into the atmosphere daily, but it would be a one trip tripe because this balloon goes to the atmosphere then transmits the meteorological data to the ground segment, and that is all no one looks to recycle it, on the other hand, if the balloon could be recycled there would be many financial benefits. This project presents a high altitude meteorological balloon-Cube relative to measuring atmosphere humidity, temperature, air pressure, and a photography payload for surface imaging that ascended up to 20Km altitude Cube reach this altitude will eject box on the ground. The telemetry data are transmitted to the ground station through two communication applications, first using a LoRa based transceiver at which it receives a command from the LoRa ground station and the second one, and payload transmits the data by an SMS in 5min after it lands on the ground. Therefore, it could be recycled. This paper presents a Cube-Balloon fabrication and flight test information to acknowledge this Cube’s feasibility for real meteorological projects.