This article proposes a numerical investigation of the frictional heating developed in sliding bearings under high velocities and the influence of the relevant temperature rise on the mechanical characteristics of the device. A three-dimensional finite element model of the bearing is created and frictional heat generation is modelled through a thermal source inserted at the sliding surface of the bearing, with intensity dependent on the coefficient of friction, the contact pressure and the velocity. The friction value is adjusted step-by-step on surface temperature and velocity and used to update the thermal flux and the resisting force developed by the bearing. The numerical predictions of temperature histories and force–displacement loops are compared with the results of laboratory tests to validate the numerical approach. The procedure can help in preliminary studies for the selection of bearing materials accounting for their thermal stability and for the estimation of change of design properties of sliding isolation bearings due to frictional heating.
20 August 2011 in Bulletin of Earthquake Engineering
Nonstructural elements (NEs) are generally defined as elements typically housed within buildings/facilities that are not part of the structural system. Nonstructural elements are often classified as architectural elements, mechanical/electrical/hydraulic systems, and building contents. Nonstructural elements are often associated with critical seismic risk, due to their high vulnerability and exposure to seismic actions, especially for critical facilities such as hospitals and nuclear plant facilities. Accordingly, the combination of major exposure and vulnerability makes NEs extremely critical in terms of seismic risk even for low to moderate seismicity. The paper reviews and evaluates the main international testing approaches and protocols for the seismic assessment of NEs by means of experimental methods, which are referred to for seismic qualification. Existing test protocols are technically analyzed considering quasi-static, single-floor dynamic, and multi-floor dynamic procedures, supplying technical and operative guidance for their implementation, according to the latest advances in the field. The study proposes novel perspectives and a unified approach for the seismic assessment and qualification of NEs. The technical recommendations lay the groundwork for a more robust and standardized testing and qualification framework. In particular, the provided data might represent the first step for developing code and regulation criteria for the experimental seismic assessment and qualification of NEs.
Friction plots of polymers sliding on smooth metal surfaces are generally characterized by two regions of distinct dependency on the normal load, with low sensitivity at low stress levels followed by a sharp change in the rate of decrease of friction with increasing pressure at levels above the plastic flow limit of the polymer. A simplified model is proposed to describe this behavior which accounts for the effect of the normal load on the growth of the real contact area and the shear stress at the interface between the polymer and the mating surface. The model has a wide generality when expressed in terms of dimensionless variables, allowing to rationalize the friction behavior of different polymers within a single framework.