Using the difference of shear wave velocity structures derived respectively from Love and Rayleigh waves, the polarization anisotropy in crust and upper mantle beneath China continent and adjacent seas is studied. The result indicates that the distribution of anisotropy is spatially uneven. (1) VSH > VSV anisotropy is dominant in the upper 150 km, which indicates that the horizontal stress in shallower lithosphere and the horizontal mass flow in upper asthenosphere are the leading factors in the formation of polarization anisotropy. In the land area the anisotropy varies markedly with depth. It is generally very weak in upper crust and upper mantle lid, while it becomes intense in the rheologically weak lower crust and asthenosphere, which indicates the lower crust may take a role of decoupling in the lithosphere deformation. (2) VSH < VSV anisotropy is the main characteristic of the lower asthenosphere beneath 200 km, which reflects the vertical movement of the mantle mass. (3) The overall pattern of anisotropy in eastern China continent is that in stable blocks VSH > VSV anisotropy is more prominent in lithosphere and VSH < VSV anisotropy is weaker in asthenosphere, in tectonically active areas it is contrary. (4) In west China the anisotropy is apparently related with the subduction of India plate beneath Tibetan Plateau. The conspicuous VSH > VSV anisotropy is the result of the collision and compression between India plate and Eurasia continent which causes orientated recrystallization of mantle material.
The permanent displacement has been widely used for slope seismic stability in practical engineering; however, the effect of the dynamic pore water pressure on the saturated and unsaturated soil slopes could not be neglected. In this paper, we propose a calculation method of dynamic pore water pressure by the hollow cylinder apparatus (GCTS) which is the most advanced and complicated device in lab testing on soil dynamics. Then, based on the proposed calculation method of dynamic pore water pressure combined with the limit equilibrium and finite element methods, we introduce a simple calculation method of permanent displacement, which avoids solving complex nonlinear equations and greatly simplifies the computational effort. Shaking table test results demonstrate the effectiveness and efficiency of the simple calculation method of permanent displacement, which could rapidly assess the soil slope seismic stability considering the effect of dynamic pore water pressure.
1 January 2020 in Latin American Journal of Solids and Structures
Because soluble salt in saline soil dissolves with water, utility tunnels built in saline soil foundation are more likely to damage due to by groundwater and earthquake. In this study, new cementitious composite materials were developed by using slag, building gypsum, quicklime, and magnesia. The unconfined compressive strengths of the saline soil solidified by new cementitious composite materials and cement are investigated, and the optimum proportion of the different components of the new cementitious composite materials is determined. We found from microscopic characteristics of the saline soil solidified by the new cementitious composite materials and cement that the new materials could better absorb chloride ions. Finally, the new cementitious composite materials were applied to saline soil foundation reinforcement of a utility tunnel. By using the finite element method (FEM) and shaking table tests, it can be seen that the displacement, acceleration and extent of damage of the utility tunnel after saline soil foundation reinforcement using new cementitious composite materials significantly decreased; therefore, the new cementitious composite materials can improve the seismic behaviour of the utility tunnel and shows potential future engineering application value.
Most of the coastal beach zone in the world is rich in wind energy reserves and has great potential for offshore wind power development. However, the sedimentary environment in the coastal area is complex and changeable, and the nature of the foundation soil of offshore wind power platforms is weak and complex, which is quite different from that in the land areas. In order to systematically study the mechanical properties of marine foundation soils, a series of geotechnical tests are carried out on representative undisturbed seabed soils, such as basic laboratory geotechnical tests, bender element tests, undrained triaxial shear tests, and resonance column tests. The test results show that shear wave velocity (Vs) of marine silt and silty clay increases linearly with the buried depth; the stress‐strain relationship curves of silty clay and silt present two different modes of development: strain hardening and strain softening, the undrained shear strength (Sd) of the two types of marine soils decreases with the increase of the void ratio (e), and both present a good single correlation. Based on the relationship between Sd and Vs from the laboratory test of disturbed seabed soils, an undrained strength evaluation method of undisturbed seabed soils under the current stratum conditions incorporating in situ shear wave velocity is established. The dynamic shear modulus (G) in the various strain ranges of undisturbed silty clay and silt increases regularly with the buried depth (H). Meanwhile, the maximum dynamic shear modulus (Gmax) linearly increases with the increase of H, whereas the attenuation relationship of G decreases with the increase of H. The prediction method of G based on buried depth is established with high accuracy.
The effects of marine and continental sedimentary environments and geological ages on the dynamic shear modulus ratio and damping ratio of the Quaternary sedimentary soils in the offshore areas of the Yellow Sea were analyzed by using a resonant column device (GCTS, USA). The results show the following: (1) The of various marine soils increases with the depth and shows a typical linear relationship. (2) The marine transgression has significantly different effects on the dynamic shear modulus ratio versus the shear strain amplitude curves (i.e., curves) and the damping ratio versus the shear strain amplitude curves (i.e., curves) of the different soil types in the offshore areas of the Yellow Sea. The effects of marine transgression were strong on clays, moderate on silty clays, and minor on silts. (3) The geological ages have noticeable effects on the curves of the tested marine silty clays, marine silts, and continental silty clays, but the effects of geological ages on the curves are minimal. The fitting parameters and recommended empirical equations of the and curves for each type of the tested soils (silty clay, clay, and silt) were obtained mirroring the effects of sedimentary environments and geological ages.
1 June 2010 in Earthquake Engineering and Engineering Vibration