This work reports the study, via the combination of Rutherford backscattering spectrometry and channeling, x-ray diffraction, and transmission electron microscopy experiments, of the damage formation in cubic yttria-stabilized zirconia single crystals irradiated with medium-energy (4 MeV) heavy (Au) ions. The damage buildup, which is accounted for in the framework of the multistep damage accumulation model, occurs in three steps. The first step at low fluences (up to ), characterized by a regular increase in both the damage yield and the elastic strain, is related to the formation of small defect clusters. The second step in the intermediate fluence range (from to ) leads to a sharp increase in the damage yield and to a large drop of the strain due to the formation of dislocation loops which collapse into a network of tangled dislocations. The third step at high fluences (above ) exhibits a surprising decrease in the damage yield, which may be attributed to the reorganization of the dislocation network that leads to the formation of weakly damaged regions with a size of the order of 100 nm.
We report on an unprecedented formation of allotrope heterostructured Si nanowires by plastic deformation based on applied radial compressive stresses inside a surrounding matrix. Si nanowires with a standard diamond structure (3C) undergo a phase transformation toward the hexagonal 2H-allotrope. The transformation is thermally activated above 500 °C and is clearly driven by a shear–stress relief occurring in parallel shear bands lying on {115} planes. We have studied the influence of temperature and axial orientation of nanowires. The observations are consistent with a martensitic phase transformation, but the finding leads to clear evidence of a different mechanism of deformation-induced phase transformation in Si nanowires with respect to their bulk counterpart. Our process provides a route to study shear-driven phase transformation at the nanoscale in Si.
Hexagonal SiGe-2H has been recently shown to have a direct bandgap, and holds the promise to be compatible with silicon technology. Hexagonal Si and Ge have been grown on an epitaxial lattice matched template consisting of wurtzite GaP and GaAs, respectively. Here, we present the growth of hexagonal Si and SiGe nanowire branches grown from a wurtzite stem by the vapor−liquid−solid growth mode, which is substantiated by in situ transmission electron microscopy. We show that the composition can be tuned through the whole range of stoichiometry from Si to Ge, and the possibility to realize Si and SiGe heterostructures in these branches.
The hexagonal‐2H crystal phase of Ge has recently emerged as a promising direct bandgap semiconductor in the mid‐infrared range providing new prospects of additional opto‐electronic functionalities of group‐IV semiconductors (Ge and SiGe). The controlled synthesis of such hexagonal‐2H Ge phase is a challenge that can be overcome by using wurtzite GaAs nanowires as a template. However, depending on growth conditions, unusual basal stacking faults (BSFs) of I3‐type are formed in the metastable 2H structure. The growth of such core/shell heterostructures is observed in situ and in real time by means of environmental transmission electron microscopy using chemical vapor deposition. The observations provide the first direct evidence of a step‐flow growth of Ge‐2H epilayers and reveal the growth‐related formation of I3‐BSFs during unstable growth. Their formation conditions are dynamically investigated. Through these in situ observations, a scenario can be proposed for the nucleation of I3‐type BSFs that is likely valid for any metastable hexagonal 2H or wurtzite structures grown on m‐plane substrates. Conditions are identified to avoid their formation for perfect crystalline synthesis of SiGe‐2H.
This paper reports on the sawtooth faceting and the related gold coverage of silicon nanowires (NWs). 111 -oriented Si NWs were grown on Si(111) substrates by ultra high vacuum chemical vapor deposition using the vapor-liquid-solid mechanism with a gold catalyst. We observed that gold nanoclusters are unequally distributed on the NW surface. They are mainly distributed on only three non-consecutive sidewalls corresponding to the (), () and () planes among the six available crystallographic {112} surfaces. In addition they are anchored on upward {111} facets. This original observation brings enhanced knowledge on the faceting mechanisms. The threefold symmetry of the facet formation and gold anchoring is supported by criteria of minimal Au/Si interfacial energy. Moreover results evidence that the selective presence of gold on the NW sidewalls affects the overall morphology due to an increased radial growth on the covered sidewalls.