This paper provides a detailed description of the findings and methodology related to the monitoring of microplastics in three lakes and one river of the Akmola Region in Kazakhstan. The concentration of microplastic particles and the analysis of water and sediment quality of the Yesil River and Kopa, Zerendinskoye, and Borovoe lakes have been analyzed. A total of 64 water samples were collected across the spring, summer, and autumn seasons, with subsequent analysis revealing a seasonal increase in microplastic concentrations. The average microplastic content ranged from 1.2 × 10⁻¹ particles/dm³ in spring to 4.5 × 10⁻¹ particles/dm³ in autumn. Lakes exhibited higher concentrations compared to the Yesil River. Correlation analysis highlighted a connection between microplastic content and turbidity, particularly notable during the spring season. Analysis of sediments revealed a decrease in microplastic concentrations from the coastal zone toward open waters sediments. Microplastic fibers were predominant in sediments (69.6%), followed by fragments (19.1%), films (7.4%), and granules (3.9%). Larger particles (>500 µm) were found in beach sediments, constituting an average of 40.5% of the total plastics found. This study contributes valuable insights into the spatial and temporal distribution of microplastics, emphasizing the need for ongoing monitoring and management strategies to address this environmental concern.

This paper presents the outcomes derived from an environmental assessment of microplastic pollution resulting from solid waste landfills in the Akmola Region, situated in North Kazakhstan. This research represents a pioneering investigation conducted on microplastics within this specific region. This study encompasses a comprehensive examination of plastic waste disposal sites across the Akmola region, with a particular emphasis on evaluating the status of the municipal solid waste management system. To characterize the plastic content within the waste present at the landfill sites, quantitative techniques were employed. Through experimental means, the composition and fractionation of plastics within the municipal solid waste (MSW) at the landfills were determined. These data were subjected to a comparative analysis, aligning them with official statistics and previously published scientific data from both Kazakhstan and other regions globally. The methodologies employed focused on the “soft” removal of organic substances through the use of oxidants which do not damage plastics, and were tested using a water-bath therapeutic treatment. Furthermore, an analysis of soil samples taken from the landfills unveiled the ultimate retention of microplastic particles, attributed to leachate and rainwater runoff. Extracts were obtained from the subsoil samples using a density-based separation process, involving a three-step extraction followed by subsequent filtration of the resulting supernatants. In addition, the soil samples underwent examination through dry-phase particle fractional separation. The particles were meticulously enumerated and classified, and their dimensions were measured employing microscopic techniques coupled with photographic documentation. The outcomes stemming from these diverse tests will serve as fundamental input for the forthcoming numerical modeling endeavor, which aims to simulate the behavior of microplastics within both soil and water. This endeavor represents a continuation of the research project, the preliminary findings of which are expounded upon in this paper.

For the first time in scientific literature, this work addresses the current situation of the Ishim River water quality in the Akmola Region (Northern Kazakhstan). This work uses environmental monitoring techniques to analyze the current state of surface waters in the river. The content of main ions, biogenic and inorganic ions, heavy metals, organic impurities in seasonal and annual dynamics have been studied. Results show that, despite the tightening of requirements for wastewater discharge into the Ishim River basin, a number of water quality indicators did not fulfill the regulatory requirements for surface water bodies during 2013–2019. It has been identified that the greatest pollution in the Ishim River is brought by enterprises of the Karaganda-Temirtau technogenic region, located in the upper reaches of the river. Future water quality monitoring is needed and should include increasing the number of sampling locations and the sampling frequency in order to characterize the spatial and temporal variability of hydrochemical parameters and allow a comprehensive monitoring of legally fixed water quality parameters/indicators.

This study investigates the presence of microplastics in tap drinking water and evaluates the efficacy of various sorbents for their removal in the context of Kazakhstan’s water treatment system. Water samples taken in the cities of Kokshetau and Krasny Yar (Akmola region) were analyzed. Microplastics were detected in all samples, with concentrations ranging from 2.0 × 10⁻² to 6.0 × 10⁻² particles/dm³, predominantly in fiber form (74.1%). Outdated technologies and non-compliance with treatment regimens contribute to poor water quality, including high turbidity (87% of samples), color deviations (40% of samples), and acidity issues (20% of samples). To address these challenges, the study examined the sorption efficiency of different sorbents, with results indicating high retention rates (82.7–97.8%) for microplastic particles. Notably, aliphatic structures like PE and PP exhibited higher retention than PET. Among the sorbents tested, the synthesized carbon sorption material (CSM) demonstrated the highest efficiency in both microplastic retention and improvement in water quality parameters, making it a promising option for water treatment facilities and household filters.

Microplastic pollution poses a significant threat to environmental and human health. This study investigated the toxicological and genotoxic effects of various microplastic types (polystyrene (PS), polyethylene terephthalate (PET), polypropylene (PP), and polyethylene (PE)) on plant and animal models. Aqueous extracts of microplastics in different size fractions (0.175 mm, 0.3 mm, 1 mm, 2 mm, and 3 mm) were evaluated for their impact on barley seed germination and cell division. Results indicated that smaller microplastic fractions exhibited higher toxicity, particularly for PP and PE. Significant reductions in germination rates and root growth were observed, along with increased chromosomal aberrations in barley cells. Furthermore, the migration of formaldehyde, a known toxicant, from microplastics exceeded permissible limits. These findings highlight the potential risks associated with microplastic pollution, particularly in drinking water sources. Future research should focus on the long-term health impacts of microplastic exposure, including carcinogenic potential, and explore the synergistic effects with other pollutants. Stricter regulations on microplastic pollution and advancements in water treatment technologies are urgently needed to mitigate these risks.

Microplastics are increasingly recognized as contaminants of emerging concern in wastewater systems, where treatment plants act both as sinks and as point sources. However, Central Asian wastewater infrastructures are under-represented in the literature, and global syntheses are hindered by strong methodological heterogeneity (sampling regimes, size cut-offs, QA/QC). This PRISMA-guided critical review compiles and harmonizes data from 63 WWTP studies worldwide (402 matrix-stage observations), including the few available case studies from Kazakhstan and neighboring countries, to benchmark Central Asian plants against a global envelope and identify methodological and infrastructure gaps. Globally, influent concentrations cluster around a median ≈65 particles/L, while final/tertiary effluents show a median ≈2.2 particles/L. Median removal efficiency is 85.5% for secondary and 95.0% for tertiary/advanced trains, with ≈10³–10⁵ particles/kg DW typically retained in sludge. Across influent, effluent and sludge, fibers and fragments of PE, PP and PET dominate polymer morphology patterns, with similar PET/PE/PP signatures also reported in downstream river water. Central Asian influents fall within global interquartile ranges, but secondary-only facilities tend to yield effluents in the upper half of the global distribution. Overall, the review provides a first integrated, methodologically explicit assessment of WWTP microplastics in Central Asia and underscores the need for protocol harmonization, longitudinal monitoring, and targeted upgrades of polishing steps and sludge management in arid hydrosystems.