Magnetic induction and current transport techniques were employed to test the electromagnetic performance of 22 samples of superconducting REBaCuO tapes of several manufacturers with the aim to select the best candidates for wiring new generation superconducting magnets for fusion reactors. An extraordinary shape of pinning force density as a function of magnetic field was observed in ‘advanced pinning, AP’ SuperPower tapes. The induced currents enabled us to classify the tapes and show the best ones, at low temperatures and high magnetic fields on the one hand and at high temperatures and low magnetic fields on the other hand. Transport current experiments confirmed the results. Moreover, they provided information on current anisotropy, which appeared to be specific for each tape type. The present results formed a basis for the ongoing study of neutron irradiation impact on the tapes’ properties. The first experiment showed that neutron irradiation by the fluence of 2.1 E22 m −2 either enhances, reduces, or has no effect on the tape’s properties, according to the tape pinning structure.
The model of thermally activated relaxation developed and successfully tested on high- Tc superconductors (Jirsa et al 2004 Phys. Rev. B 70 0245251 ) was applied to magnetic data of a bulk spark-plasma sintered MgB 2 sample to elucidate its magnetic relaxation behavior. MgB 2 and the related borides form a superconductor class lying between classical and high- Tc superconductors. In accord with this classification, the relaxation phenomena were found to be about ten times weaker than in cuprates. Vortex pinning analyzed in terms of the field dependence of the pinning force density indicates a combined pinning by normal point-like defects and by grain surfaces. An additional mode of pinning at rather high magnetic fields (of still unknown origin) was observed.
Systematic doping by transition elements Fe, Co and Ni on each site of Ni2MnGa alloy reveal that in bulk material the increase in martensitic transformation temperature is usually accompanied by the decrease in ferromagnetic Curie temperature, and vice versa. The highest martensitic transformation temperature (571 K) was found for Ni50.0Mn25.4(Ga20.3Ni4.3) with the result of a reduction in Curie temperature by 55 K. The highest Curie point (444 K) was found in alloy (Ni44.9Co5.1)Mn25.1Ga24.9; however, the transition temperature was reduced to 77 K. The dependence of transition temperature is better scaled with the Ne/a parameter (number of non-bonding electrons per atom) compared to usual e/a (valence electrons per atom). Ne/a dependence predicts a disappearance of martensitic transformation in (Ni45.3Fe5.3)Mn23.8Ga25.6, in agreement with our experiment. Although Curie temperature usually slightly decreases while the martensitic transition increases, there is no significant correlation of Curie temperature with e/a or Ne/a parameters. The doping effect of the same element is different for each compositional site. The cascade substitution is discussed and related to the experimental data.