Magnetic pulse welding (MPW) is a promising joining technology for the large-scale production of dissimilar metallic joints. Although the heat input is comparatively low, the temporary occurrence of high temperatures in the joining gap was found to play an important role during the joint formation. It is possible that the melting or even the boiling temperature of the involved materials will be exceeded, and fusion welding will occur. The purpose of this study is to investigate the influence of target materials with different thermal properties on the joint formation and weld seam characteristic. Therefore, MPW between steel targets and aluminum flyers was performed with and without copper coatings on steel. The lower melting temperature of copper compared to steel had no significant effect on the appearance of the mixed zones in the interface and the amount of molten target material or aluminum, respectively. Nevertheless, the comparison of the higher impact energies showed, that the copper interlayer can lead to a decrease in the weld length or a degradation of the weld quality due to an extended intermetallic phase formation or cracks. This result is important for the parameter adjustment of magnetic pulse welding processes.
The reinforcement of aluminum alloys with particles leads to the enhancement of their mechanical properties at room temperature. However, the creep behavior at elevated temperatures is often negatively influenced. This raises the question of how it is possible to influence the creep behavior of this type of material. Within this paper, selected creep and tensile tests demonstrate the beneficial effects of boron on the properties of precipitation-hardenable aluminum matrix composites (AMCs). The focus is on the underlying microstructure behind this effect. For this purpose, boron was added to AMCs by means of mechanical alloying. Comparatively higher boron contents than in steel are investigated in order to be able to record their influence on the microstructure including the formation of potential new phases as well as possible. While the newly formed phase Al3BC can be reliably detected by X-ray diffraction (XRD), it is difficult to obtain information about the phase distribution by means of scanning electron microscopy (SEM) and scanning transmission electron microscopy (STEM) investigations. An important contribution to this is finally provided by the investigation using Raman microscopy. Thus, the homogeneous distribution of finely scaled Al3BC particles is detectable, which allows conclusions about the microstructure/property relationship.
Composites made of carbon-fiber-reinforced carbon (C/C or CFC) are high-performance materials with a wide range of properties, making them especially suitable for the design of thermally and mechanically highly stressed components. As the production process of these high-performance materials is currently still very expensive, new concepts for an economical manufacturing process are required. This paper focusses on an innovative approach that uses the polymer-based pultrusion process for shaping with a subsequent carbonization step to C/C. In this process, carbon fibers (CF) and a phenolic resin were used to manufacture a semi-finished product made of unidirectional (UD) carbon-fiber-reinforced plastic (CFRP) with a fiber volume content of 66%. The C/C composite shows dimensional stability and has a flexural strength of approx. 240 MPa and a flexural modulus of approx. of 135 GPa with an elongation of 1.8%.
A fundamental aspect of shape optimization is the geometry representation, since it determines the design space explored by the optimizer. Established approaches such as CAD-based parameterizations, free-form deformation, and node-based methods are widely used, but often require a manual, problem-specific setup, restrict the design space, or introduce many variables that require smoothing or filtering. This work presents a neural implicit geometry representation framework for gradient-based shape optimization. Geometries are described by a signed distance function represented by a neural decoder and controlled by a continuous latent field. The decoder is trained once on simple geometric primitives and then kept fixed, so new geometries are reconstructed and optimized by updating only latent control variables. The approach avoids problem-specific retraining and manual definition of design variables, provides local geometric control in a flexible design space, and yields a differentiable path to the extracted surface mesh. Reconstruction experiments show that geometrically diverse shapes can be represented without retraining. In three-dimensional drag-minimization problems, the method produces smooth shape evolutions, outperforms a comparable free-form deformation parameterization, and realizes topological changes. These results indicate that neural implicit geometry representations are a flexible and largely automated alternative to classical shape parameterizations.