Martin Otto

Mr. Martin Otto


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 June 2021 in Metals
Verified
Journal Article
Open access
PDF file
MOMartin Otto
Martin Otto
SPStefan Pilz
Stefan Pilz
GAGebert Annett
Gebert Annett
UKUta Kühn
Uta Kühn
JHJulia Kristin Hufenbach
Julia Kristin Hufenbach
In the last decade, additive manufacturing technologies like laser powder bed fusion (LPBF) have emerged strongly. However, the process characteristics involving layer-wise build-up of the part and the occurring high, directional thermal gradient result in significant changes of the microstructure and the related properties compared to traditionally fabricated materials. This study presents the influence of the build direction (BD) on the microstructure and resulting properties of a novel austenitic Fe-30Mn-1C-0.02S alloy processed via LPBF. The fabricated samples display a {011} texture in BD which was detected by electron backscatter diffraction. Furthermore, isolated binding defects could be observed between the layers. Quasi-static tensile and compression tests displayed that the yield, ultimate tensile as well as the compressive yield strength are significantly higher for samples which were built with their longitudinal axis perpendicular to BD compared to their parallel counterparts. This was predominantly ascribed to the less severe effects of the sharp-edged binding defects loaded perpendicular to BD. Additionally, a change of the Young’s modulus in dependence of BD could be demonstrated, which is explained by the respective texture. Potentiodynamic polarization tests conducted in a simulated body fluid revealed only slight differences of the corrosion properties in dependence of the build design.

14 December 2023 in Materials Science and Engineering: A
Verified
Journal Article
Open access
MOMartin Otto
Martin Otto
JFJens Freudenberger
Jens Freudenberger
LGLars Giebeler
Lars Giebeler
AWAnja Weidner
Anja Weidner
JHJulia Hufenbach
Julia Hufenbach

22 January 2024 in ACS Applied Bio Materials
Verified
Journal Article
Open access
BPBirgit Paul
Birgit Paul
Annika KielAnnika Kiel
Annika Kiel
MOMartin Otto
Martin Otto
TGThomas Gemming
Thomas Gemming
VHVolker Hoffmann
Volker Hoffmann
JHJulia Kristin Hufenbach
Julia Kristin Hufenbach
Implant-related infections or inflammation are one of the main reasons for implant failure. Therefore, different concepts for prevention are needed, which strongly promote the development and validation of improved material designs. Besides modifying the implant surface by, for example, antibacterial coatings (also implying drugs) for deterring or eliminating harmful bacteria, it is a highly promising strategy to prevent such implant infections by antibacterial substrate materials. In this work, the inherent antibacterial behavior of the as-cast biodegradable Fe69Mn30C1 (FeMnC) alloy against Gram-negative Pseudomonas aeruginosa and Escherichia coli as well as Gram-positive Staphylococcus aureus is presented for the first time in comparison to the clinically applied, corrosion-resistant AISI 316L stainless steel. In the second step, 3.5 wt % Cu was added to the FeMnC reference alloy, and the microbial corrosion as well as the proliferation of the investigated bacterial strains is further strongly influenced. This leads for instance to enhanced antibacterial activity of the Cu-modified FeMnC-based alloy against the very aggressive, wild-type bacteria P. aeruginosa. For clarification of the bacterial test results, additional analyses were applied regarding the microstructure and elemental distribution as well as the initial corrosion behavior of the alloys. This was electrochemically investigated by a potentiodynamic polarization test. The initial degraded surface after immersion were analyzed by glow discharge optical emission spectrometry and transmission electron microscopy combined with energy-dispersive X-ray analysis, revealing an increase of degradation due to Cu alloying. Due to their antibacterial behavior, both investigated FeMnC-based alloys in this study are attractive as a temporary implant material.

7 February 2024 in Small
Verified
Journal Article
Open access
BRBoris Rivkin
Boris Rivkin
FAFarzin Akbar
Farzin Akbar
MOMartin Otto
Martin Otto
LBLukas Beyer
Lukas Beyer
BPBirgit Paul
Birgit Paul
MSMariana Medina Sánchez
Mariana Medina Sánchez
Biodegradable medical implants promise to benefit patients by eliminating risks and discomfort associated with permanent implantation or surgical removal. The time until full resorption is largely determined by the implant's material composition, geometric design, and surface properties. Implants with a fixed residence time, however, cannot account for the needs of individual patients, thereby imposing limits on personalization. Here, an active Fe‐based implant system is reported whose biodegradation is controlled remotely and in situ. This is achieved by incorporating a galvanic cell within the implant. An external and wireless signal is used to activate the on‐board electronic circuit that controls the corrosion current between the implant body and an integrated counter electrode. This configuration leads to the accelerated degradation of the implant and allows to harvest electrochemical energy that is naturally released by corrosion. In this study, the electrochemical properties of the Fe‐30Mn‐1C/Pt galvanic cell model system is first investigated and high‐resolution X‐ray microcomputed tomography is used to evaluate the galvanic degradation of stent structures. Subsequently, a centimeter‐sized active implant prototype is assembled with conventional electronic components and the remotely controlled corrosion is tested in vitro. Furthermore, strategies toward the miniaturization and full biodegradability of this system are presented.

20 July 2024 in Optics & Laser Technology
Verified
Journal Article
Open access
Konrad KosibaKonrad Kosiba
Konrad Kosiba
WKWayne King
Wayne King
JHJunhee Han
Junhee Han
BPBirgit Paul
Birgit Paul
DKDenys Y. Kononenko
Denys Y. Kononenko
JHJulia Kristin Hufenbach
Julia Kristin Hufenbach

12 March 2025 in Corrosion Science
Verified
Journal Article
Open access
MOMartin Otto
Martin Otto
THThomas Hultsch
Thomas Hultsch
Viktoriia ShtefanViktoriia Shtefan
Viktoriia Shtefan
VHVolker Hoffmann
Volker Hoffmann
Sviatlana LamakaSviatlana Lamaka
Sviatlana Lamaka
JHJulia Kristin Hufenbach
Julia Kristin Hufenbach