Xuguo Huai

Prof. Xuguo Huai

Center for Engineering Intership and Training, Tiangong University
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 May 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
XFXiaowei Fan
Xiaowei Fan
XHXuguo Huai
Xuguo Huai
JWJie Wang
Jie Wang
LJLi-Chao Jing
Li-Chao Jing
TWTao Wang
Tao Wang
HGHong-Zhang Geng
Hong-Zhang Geng
Graphene film has wide applications in optoelectronic and photovoltaic devices. A novel and facile method was reported for the reduction of graphene oxide (GO) film by electron transfer and nascent hydrogen produced between aluminum (Al) film deposited by magnetron sputtering and hydrochloric acid (HCl) solution for only 5 min, significantly shorter than by other chemical reduction methods. The thickness of Al film was controlled utilizing a metal detection sensor. The effect of the thickness of Al film and the concentration of HCl solution during the reduction was explored. The optimal thickness of Al film was obtained by UV-Vis spectroscopy and electrical conductivity measurement of reduced GO film. Atomic force microscope images could show the continuous film clearly, which resulted from the overlap of GO flakes, the film had a relatively flat surface morphology, and the surface roughness reduced from 7.68 to 3.13 nm after the Al reduction. The film sheet resistance can be obviously reduced, and it reached 9.38 kΩ/sq with a high transmittance of 80% (at 550 nm). The mechanism of the GO film reduction by electron transfer and nascent hydrogen during the procedure was also proposed and analyzed.

23 December 2022 in Nanotechnology
Verified
Journal Article
Closed access
PQPeng-Fei Qian
Peng-Fei Qian
JWJing-Qi Wang
Jing-Qi Wang
TWTao Wang
Tao Wang
XHXuguo Huai
Xuguo Huai
WGWen-Hao Geng
Wen-Hao Geng
HGHong-Zhang Geng
Hong-Zhang Geng
Transparent conductive films with high stability were prepared by embedding silver nanowires in colorless polyimide and adding a protective layer of exfoliated graphene. The films exhibit great light transmission and conductivity with a sheet resistance of 22 Ω sq−1 at transmittance of 83%. Due to its special embedded structure, the conductive layer can withstand several peeling experiments without falling off. In addition, the most outstanding advantage is the ultra-high stability of the films, including high mechanical robustness, strong chemical corrosion resistance and high operating voltage capacity. The organic light-emitting diode devices prepared based on this transparent conductive electrode exhibit comparable efficiency to indium tin oxide (ITO) based devices, with C.E. max = 2.78 cd A−1, P −1 .E. max = 1.89 lm W−1, EQE max = 0.89%. Moreover, the efficiencies were even higher than that of ITO devices when the operating voltage of the device exceeds 5 V. The above performances show that the transparent conductive electrode based on this structure has high potential for application in organic electronic devices.

9 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
XFXiaowei Fan
Xiaowei Fan
ZZZenghua Zhao
Zenghua Zhao
XLXiaoping Liang
Xiaoping Liang
XHXuguo Huai
Xuguo Huai
CWChan Wang
Chan Wang
CDChunyang Duan
Chunyang Duan
Transparent conductive films are widely used in electronic products and industrial fields. Ultra-thin Ag conductive nanofilm (ACF) was prepared on a soda lime silica glass (ordinary architectural glass) substrate with industrial magnetron sputtering equipment with AZO (Al2O3 doped ZnO) as the crystal bed and wetting layer. In order to improve the corrosion resistance and conductivity of the ACF, graphene nanosheets were modified on the surface of the ACF by electrospraying for the first time. The results show that this graphene modification could be carried out continuously on a meter scale. With the modification of the graphene layer, the corrosion rate of graphene-decorated ACF (G/ACF) can be reduced by 74.56%, and after 72 h of salt spray test, the conductivity of ACF samples without modification of graphene can be reduced by 34.1%, while the conductivity of G/ACF samples with modification of graphene can be reduced by only 6.5%. This work proves the potential of graphene modified ACF to prepare robust large-area transparent conductive film.

23 January 2026 in Coatings
Verified
Journal Article
Open access
PDF file
XHXuguo Huai
Xuguo Huai
YWYuhan Wang
Yuhan Wang
WCWeiwei Cao
Weiwei Cao
XFXiaowei Fan
Xiaowei Fan
HGHong-Zhang Geng
Hong-Zhang Geng
To combat the critical hurdles of thermal buildup and low-temperature shutdown events in 5G-enabled smart wearables, a high-performance flexible composite film based on ellagic acid-modified single-walled carbon nanotubes (EA-SWCNTs) and aramid nanofibers (ANF) was designed and developed. The influence mechanism of the loading amount of the conductive network on the electrothermal properties of the composite material was focused on. The results show that through the π-π stacking non-covalent modification strategy, the uniform dispersion of EA-SWCNTs on the layer of ANF substrate and the construction of an ordered layered structure were successfully achieved. The prepared composite film could reach a steady-state temperature of 171 °C under a driving voltage of 3.5 V. In addition, it exhibits excellent electrothermal response characteristics and cyclic stability. It could reach the steady-state voltage within 10 s and shows no obvious performance degradation after multiple cycles. This composite film shows broad application prospects in fields such as intelligent wearable devices and flexible electronic protection.

29 April 2026 in Nanomaterials
Verified
Journal Article
Open access
PDF file
SWShi-Yao Wang
Shi-Yao Wang
YWYue-Xin Wang
Yue-Xin Wang
李政李 文 政
李 文 政
李李李梦遥 李
李梦遥 李
JGJiayi Gao
Jiayi Gao
HGHong-Zhang Geng
Hong-Zhang Geng
Carbon nanotube (CNT) materials exhibit ultrahigh electrical and thermal conductivity. Upon electrical excitation, CNT-based transparent conductive films (TCFs) can emit far-infrared radiation (FIR) and provide certain physiotherapeutic efficacy, making them ideal candidates for thermotherapy applications. This work systematically tests and analyzes the fundamental physical properties and physiotherapeutic performance of CNT flexible thin-film heaters (TFHs) for potential use in health physiotherapy. Two types of TFHs with different electrode connection modes were fabricated via the prepared TCFs. Experimental characterizations were conducted on their response time, electrothermal performance, and heat transfer characteristics. The results showed that the temperature rise per unit input power for TFH1 was 16.71 °C/W, while that of TFH2 was 4.29 °C/W at the same voltage of 10 V. In addition, the variation trends of maximum temperature with power density were highly consistent for the two films. This demonstrates that TFHs fabricated using the same TCFs exhibit excellent and high electrothermal conversion efficiency as well as outstanding comprehensive electrothermal performance. In addition, smaller L/W ratio leads to lower resistance of TFHs, resulting in a stronger thermal effect under identical applied voltage. After the temperature stabilized, the surface temperature of the TFHs decreased by approximately 5 °C when attached to the human arm, confirming that the heat generated by the TFHs under electrical excitation could be effectively absorbed by the human body. The TFHs emitted rapid FIR upon electrification, and the peak wavelength ranged from 8 to 12 µm, which fell within the range of 6–14 µm that was easily absorbable by the human body. The heat can be rapidly absorbed by the skin and distributed throughout the body via blood circulation, yielding favorable physiotherapeutic efficacy. This study provides key physical parameters for the application of TFHs in wearable medical devices and physiotherapy equipment.