Currently, the applications of the Internet of Things (IoT) generate a large amount of sensor data at a very high pace, making it a challenge to collect and store the data. This scenario brings about the need for effective data compression algorithms to make the data manageable among tiny and battery-powered devices and, more importantly, shareable across the network. Additionally, considering that, very often, wireless communications (e.g., low-power wide-area networks) are adopted to connect field devices, user payload compression can also provide benefits derived from better spectrum usage, which in turn can result in advantages for high-density application scenarios. As a result of this increase in the number of connected devices, a new concept has emerged, called TinyML. It enables the use of machine learning on tiny, computationally restrained devices. This allows intelligent devices to analyze and interpret data locally and in real time. Therefore, this work presents a new data compression solution (algorithm) for the IoT that leverages the TinyML perspective. The new approach is called the Tiny Anomaly Compressor (TAC) and is based on data eccentricity. TAC does not require previously established mathematical models or any assumptions about the underlying data distribution. In order to test the effectiveness of the proposed solution and validate it, a comparative analysis was performed on two real-world datasets with two other algorithms from the literature (namely Swing Door Trending (SDT) and the Discrete Cosine Transform (DCT)). It was found that the TAC algorithm showed promising results, achieving a maximum compression rate of 98.33%. Additionally, it also surpassed the two other models regarding the compression error and peak signal-to-noise ratio in all cases.

Vehicles are the major source of air pollution in modern cities, emitting excessive levels of CO₂ and other noxious gases. Exploiting the OBD-II interface available on most vehicles, the continuous emission of such pollutants can be indirectly measured over time, although accuracy has been an important design issue when performing this task due the nature of the retrieved data. In this scenario, soft-sensor approaches can be adopted to process engine combustion data such as fuel injection and mass air flow, processing them to estimate pollution and transmitting the results for further analyses. Therefore, this article proposes a soft-sensor solution based on an embedded system designed to retrieve data from vehicles through their OBD-II interface, processing different inputs to provide estimated values of CO₂ emissions over time. According to the type of data provided by the vehicle, two different algorithms are defined, and each follows a comprehensive mathematical formulation. Moreover, an unsupervised TinyML approach is also derived to remove outliers data when processing the computed data stream, improving the accuracy of the soft sensor as a whole while not requiring any interaction with cloud-based servers to operate. Initial results for an embedded implementation on the Freematics ONE+ board have shown the proposal’s feasibility with an acquisition frequency equal to 1Hz and emission granularity measure of gCO₂/km.

In the last decade, the growth of the automotive market with the aid of technologies has been notable for the economic, automotive and technological sectors. Alongside this growing recognition, the so called Internet of Intelligent Vehicles (IoIV) emerges as an evolution of the Internet of Things (IoT) applied to the automotive sector. Closely related to IoIV, emerges the concept of Industrial Internet of Things (IIoT), which is the current revolution seen in industrial automation. IIoT, in its turn, relates to the concept of Industry 4.0, that is used to represent the current Industrial Revolution. This revolution, however, involves different areas: from manufacturing to healthcare. The Industry 4.0 can create value during the entire product lifecycle, promoting customer feedback, that is, having information about the product history throughout it is life. In this way, the automatic communication between vehicle and factory was facilitated, allowing the accomplishment of different analysis regarding vehicles, such as the identification of a behavioral pattern through historical driver usage, fuel consumption, maintenance indicators, so on. Thus, allowing the prevention of critical issues and undesired behaviors, since the automakers lose contact with the vehicle after the purchase. Therefore, this paper aims to propose a customer feedback platform for vehicle manufacturing in Industry 4.0 context, capable of collecting and analyzing, through an OBD-II (On-Board Diagnostics) scanner, the sensors available by vehicles, with the purpose of assisting in the management, prevention, and mitigation of different vehicular problems. An intercontinental evaluation conducted between Brazil and Italy locations shown the feasibility of platform and the potential to use in order to improve the vehicle manufacturing process.

Historically, cities follow reactive planning models where managers make decisions as problems occur. On the other hand, the exponential growth of Information and Communication Technologies (ICT) has allowed the connection of a diverse array of sensors, devices, systems, and objects. These objects can then generate data that can be transformed into information and used in a more efficient urban planning paradigm, one that allows decisions to be made before the occurrence of problems and emergencies. Therefore, this article aims to propose a platform capable of estimating the amount of carbon dioxide based on sensor readings in vehicles, indirectly contributing to a more proactive city planning based on the monitoring of vehicular pollution. Crowdsensing techniques and an On-Board Diagnostic (OBD-II) reader are used to extract data from vehicles in real time, which are then stored locally on the devices used to perform data collection. With the performed experiments, it was possible to extract information about the operation of the vehicles and their dynamics when moving in a city, providing valuable information that can support auxiliary tools for the management of urban centers.

In the current scenario of fast technological advancement, increasingly characterized by widespread adoption of Artificial Intelligence (AI)-driven tools, the significance of autonomous systems like chatbots has been highlighted. Such systems, which are proficient in addressing queries based on PDF files, hold the potential to revolutionize customer support and post-sales services in the automotive sector, resulting in time and resource optimization. Within this scenario, this work explores the adoption of Large Language Models (LLMs) to create AI-assisted tools for the automotive sector, assuming three distinct methods for comparative analysis. For them, broad assessment criteria are considered in order to encompass response accuracy, cost, and user experience. The achieved results demonstrate that the choice of the most adequate method in this context hinges on the selected criteria, with different practical implications. Therefore, this work provides insights into the effectiveness and applicability of chatbots in the automotive industry, particularly when interfacing with automotive manuals, facilitating the implementation of productive generative AI strategies that meet the demands of the sector.