Bauxite deposits in the Amazon region are commonly covered by yellowish clays which can reach up to 25m thick, known as Belterra Clay (BTC). In Rondon do Pará, Eastern Amazon, BTC is 13m thick and covers world-class bauxite reserves. Three pilot bauxite mines were investigated in Rondon do Pará for an initial characterization of the local BTC. In discordant contact with the lateritic profile, the BTC has reddish brown colors at its base to ocher tones towards the top. It has a massive structure with silt-clayey texture and nodular bauxitic fragments at its base. Rietveld mineral quantification of the material attests that it is dominated by kaolinite, with goethite, gibbsite, hematite, anatase and residual quartz. The thermal behavior of the material also confirms its mineralogical composition. Kaolinite is of low structural order, which was considered the main difficulty in the application of the Rietveld method. Goethite has up to 33 mol% of Al. As observed by scanning electron microscopy (SEM), the minerals represent pseudo-hexagonal crystals measuring from 150 to 700 nm. The BTC in the studied area is correlated to BTC on others bauxitic deposits of the Amazon region, suggesting this material experienced the same genesis and geological evolution, probably during the Pliocene.
1 June 2021 in Journal of South American Earth Sciences
Mineralogical appraisal is an important tool for both mining and industrial processes. X-ray powder diffraction analysis (XRPD) can deliver fast and reliable mineralogical quantification results to aid industrial processes and improve ore recoveries. Furthermore, X-ray fluorescence (XRF) chemical data, thermal analysis (TA), and Fourier-transformed infrared spectroscopy (FTIR) can be used to validate and refine XRPD results. Mineralogical assessment of non-traditional ores, such as mining wastes, is also an important step to consider them for near-future industries. In the Brazilian Amazon, alumina-rich clays cover the largest and most important bauxitic deposits of the region and have been considered as a possible raw material for the local cement and ceramic industry. In this work, a mineralogical evaluation of these clays (Belterra Clays) is performed using XRPD, XRF, TA, and FTIR. XRPD-Rietveld quantification confirmed that kaolinite is the main phase of the clay overburden, followed by variable contents of gibbsite and goethite and minor quantities of hematite, anatase, and quartz. The chemistry derived from Rietveld, based on stoichiometric phase compositions, presents a good correlation with the XRF data and is also supported by the TA and FTIR data. The initially assumed homogeneous composition of Belterra Clay is revealed to be variable by the present mineralogical study.
A comparison of Rietveld refinement results for a bauxite-bearing regolith and its clayey cover in the Amazon region was made with stoichiometric calculations from chemical analysis and partly from thermogravimetric results. For this investigation a profile in the bauxite-bearing regolith occurrence in the ALCOA bauxite mine at Juruti, Brazil was studied. The different minerals, their compositions and their low crystallinity in the different horizons were investigated and the contents determined. It is evident that some minerals show several generations and some chemical composition changes that must be included in the Rietveld refinement. Al-rich hematites and goethites are common along the bauxite profile. Amorphous contents were determined with rutile added as an internal standard and shown to have gibbsite- or kaolinite-like composition. The minerals could be quantified in the different horizons and the difficulties were mainly related to variable crystalline aspects of the phases. Rietveld refinement can be a powerful tool in bauxite prospecting, quality control and during mining and beneficiation of ore minerals using the adapted refinement strategies.
X-ray powder diffraction (XRPD) analysis combined with the Rietveld method is commonly used in the mineralogical quantification of a range of different samples, including soil, rocks, and many industrial materials. The combination of this technique with the addition method, i.e. the successive addition of a mineral phase to the investigated sample, offers a simple and reliable method to test Rietveld results without the need for third techniques. Four different hydrated cement samples were successive mixed (at 1, 5, and 10%) with one of the main mineral-related phases (ettringite, larnite, ternesite, or ye’elimite) occurring in them. The Rietveld quantified amounts of these phases show a very good agreement with their added amounts, all resulting in regression lines with R2>0.99. The respective line equations permitted the calibration of the quantified amounts of the studied mineral phases, which presented standard deviations lower than 0.3. Keywords: Rietveld; addition method; hydrated cement, calcium sulphoaluminate.