This paper presents numerical simulations of free surface flows induced by a dam break comparing the shallow water approach to fully three-dimensional simulations. The latter are based on the solution of the complete set of Reynolds-Averaged Navier-Stokes (RANS) equations coupled to the Volume of Fluid (VOF) method. The methods assessment and comparison are carried out on a dam break over a flat bed without friction, a dam break over a triangular bottom sill and a dam break flow over a 90° bend. Experimental and numerical literature data are compared to present results. The results demonstrate that the shallow water approach, even if able to sufficiently reproduce the main aspects of the fluid flows, loses some three-dimensional phenomena, due to the incorrect shallow water idealization that neglects the three-dimensional aspects related to the gravity force.

Lattice Boltzmann Methods for Multiphase Flow Simulations across Scales - Volume 9 Issue 2 - Giacomo Falcucci, Stefano Ubertini, Chiara Biscarini, Silvia Di Francesco, Daniele Chiappini, Silvia Palpacelli, Alessandro De Maio, Sauro Succi

Soil erosion during rainfall events is affected by several factors, such as topography, soil type, land management, and vegetation cover. In this study, a series of tests investigates the influence of selected perennial herbaceous plants with a deep and strong rooting system, called MC1, on runoff generation and soil erosion. The tests on the investigated nature-based solution have been performed in the Cape Fear experimental hillslope with natural and artificial rainfall and for different vegetation heights. For all the experiments, runoff, soil moisture, and erosion data were observed and collected. The results obtained in this study suggest the following conclusions: (1) MC1 is effective in terms of soil erosion reduction already with a minimum vegetation height equal to 30 cm; (2) MC1 maximum efficiency, in terms of soil loss reduction, has been reached for a vegetation height equal to 70 cm; (3) In terms of the eroded material, the use of MC1 allows for a reduction of soil loss up to 300 times higher than the bare soil condition; (4) The use of MC1 allows for a reduction in the runoff coefficient up to 1/3 of the corresponding value in the bare soil condition.

In this paper, we investigate the performance of three-dimensional (3D) hydraulic modeling when dealing with river sinuosity and meander bends. In river bends, the flow is dominated by a secondary current, which has a key role on the flow redistribution. The secondary flow induces transverse components of the bed shear stress and increases the velocity in outward direction, thus generating local erosion and riverbed modifications. When in river bends, the 3D processes prevail, and a 3D computational fluid dynamics (CFD) model is required to correctly predict the flow structure. An accurate description of the different hydrodynamic processes in mildly and sharply curved bends find a relevant application in meanders migration modeling. The mechanisms that drive the velocity redistribution in meandering channels depend on the river’s roughness, the flow depth (H), the radius curvature (R), the width (B) and the bathymetric variations. Here, the hydro-geomorphic characterization of sharp and mild meanders is performed by means of the ratios R/B, B/H, and R/H, and of the sinuosity index. As a case study, we selected the Malpasset dam break on the Reyran River Valley (FR), as it is perfectly suited for investigating performances and issues of a 3D model in simulating the inundation dynamics in a river channel with a varying curvature radius.