An entire design-through-analysis workflow solution for isogeometric B-Rep analysis (IBRA), including both the interface to existing CADs and the analysis procedure, is presented. Possible approaches are elaborated for the full scope of structural analysis solvers ranging from low to high isogeometric simulation fidelity. This is based on a systematic investigation of solver designs suitable for IBRA. A theoretically ideal IBRA solver has all CAD capabilities and information accessible at any point, however, realistic scenarios typically do not allow this level of information. Even a classical FE solver can be included in the CAD-integrated workflow, which is achieved by a newly proposed meshless approach. This simple solution eases the implementation of the solver backend. The interface to the CAD is modularized by defining a database, which provides IO capabilities on the base of a standardized data exchange format. Such database is designed to store not only geometrical quantities but also all the numerical information needed to realize the computations. This feature allows its use also in codes which do not provide full isogeometric geometrical handling capabilities. The rough geometry information for computation is enhanced with the boundary topology information which implies trimming and coupling of NURBS-based entities. This direct use of multi-patch trimmed CAD geometries follows the principle of embedding objects into a background parametrization. Consequently, redefinition and meshing of geometry is avoided. Several examples from illustrative cases to industrial problems are provided to demonstrate the application of the proposed approach and to explain in detail the proposed exchange formats.
In many geomechanics applications, material boundaries are subjected to large displacements and deformation. Under these circumstances, the application of boundary conditions using particle methods, such as the material point method (MPM), becomes a challenging task since material boundaries do not coincide with the background mesh. This paper presents a formulation of penalty augmentation to impose nonhomogeneous, nonconforming Dirichlet boundary conditions in implicit MPM. The penalty augmentation is implemented utilizing boundary particles, which can move either according to or independently from the material deformation. Furthermore, releasing contact boundary condition, as well as the capability to accommodate slip boundaries, is introduced in the current work. The accuracy of the proposed method is assessed in both 2D and 3D cases, by convergence analysis reaching the analytical solution and by comparing the results of nonconforming and classical grid-conforming simulations.
12 September 2022 in Computer Methods in Applied Mechanics and Engineering
Modular precast construction is a methodological approach to reduce environmental impacts and increase productivity when building with concrete. Constructions are segmented into similar precast concrete elements, prefabricated with integrated quality control, and assembled just-in-sequence on site. Due to the automatised prefabrication, inaccuracies are minimised and the use of high-performance materials is enabled. As a result, the construction process is accelerated, and the modules can be designed to be lightweight and resource-efficient. This contribution presents the fundamentals of modular constructions made from precast concrete components. Then, to elaborate the requirements of a contemporary modular precast construction, the historic developments are described. Further, concepts and technical processes–comprehensible to non-expert readers–are introduced to formalise the discussion about the current state-of-the-art methods. Three case studies treating ongoing research are introduced and related to the conceptual fundamentals. The research is evaluated with regard to current barriers and future directions. In conclusion, modular precast construction is able to reduce emissions and increase productivity in the sector if researchers and firms coordinate the development of suitable technologies that bring value to critical stakeholders.
27 August 2022 in International Journal of Non-Linear Mechanics
The Material Point Method (MPM) is an established and powerful numerical method particularly useful for simulating large-scale, rapid soil deformations. Therefore, it is often used for the numerical investigation of mass movement hazards such as landslides, debris flows, or avalanches. It combines the benefits of both mesh-free and mesh-based continuum-based discretization techniques by discretizing the physical domain with Lagrangian moving particles carrying the history-dependent variables while the governing equations are solved at the Eulerian background grid, which brings many similarities with commonly used finite element methods. However, due to this hybrid nature, the material boundaries do not usually coincide with the nodes of the computational grid, which complicates the imposition of boundary conditions. Furthermore, the position of the boundary may change at each time step and, moreover, may be defined at arbitrary locations within the computational grid that do not necessarily coincide with the body contour, leading to different interactions between the material and the boundary. To cope with these challenges, this paper presents a novel element-wise formulation to weakly impose non-conforming Dirichlet conditions using Lagrange multipliers. The proposed formulation introduces a constant Lagrange multiplier approximation within the constrained elements in combination with a methodology to eliminate superfluous constraints. Therefore, in combination with simple element-wise interpolation functions classically utilized in MPM (and FEM) to approximate the unknown field, a suitable Lagrange multiplier discretization is obtained. In this way, we obtain a robust, efficient, and user-friendly boundary imposition method for immersed methods specified herein for implicit MPM. Furthermore, the extension to frictionless slip conditions is derived. The proposed methodologies are assessed by comparing the numerical results with both analytical and experimental data to demonstrate their accuracy and wide range of applications.