Three-dimensional (3D) printing application is a promising method for bone tissue engineering. For enhanced bone tissue regeneration, it is essential to have printable composite materials with appealing properties such as construct porous, mechanical strength, thermal properties, controlled degradation rates, and the presence of bioactive materials. In this study, polycaprolactone (PCL), gelatin (GEL), bacterial cellulose (BC), and different hydroxyapatite (HA) concentrations were used to fabricate a novel PCL/GEL/BC/HA composite scaffold using 3D printing method for bone tissue engineering applications. Pore structure, mechanical, thermal, and chemical analyses were evaluated. 3D scaffolds with an ideal pore size (~300 µm) for use in bone tissue engineering were generated. The addition of both bacterial cellulose (BC) and hydroxyapatite (HA) into PCL/GEL scaffold increased cell proliferation and attachment. PCL/GEL/BC/HA composite scaffolds provide a potential for bone tissue engineering applications.

In this research, polyvinyl-alcohol (PVA)/gelatin (GEL)/propolis (Ps) biocompatible nanofiber patches were fabricated via electrospinning technique. The controlled release of Propolis, surface wettability behaviors, antimicrobial activities against the S. aureus and P. aeruginosa, and biocompatibility properties with the mesenchymal stem cells (MSCs) were investigated in detail. By adding 0.5, 1, and 3 wt.% GEL into the 13 wt.% PVA, the morphological and mechanical results suggested that 13 wt.% PVA/0.5 wt.% GEL patch can be an ideal matrix for 3 and 5 wt.% propolis addition. Morphological results revealed that the diameters of the electrospun nanofiber patches were increased with GEL (from 290 nm to 400 nm) and Ps addition and crosslinking process cause the formation of thicker nanofibers. The tensile strength and elongation at break enhancement were also determined for 13 wt.% PVA/0.5 wt.% GEL/3 wt.% Ps patch. Propolis was released quickly in the first hour and arrived at a plateau. Cell culture and contact angle results confirmed that the 3 wt.% addition of propolis reinforced mesenchymal stem cell proliferation and wettability properties of the patches. The antimicrobial activity demonstrated that propolis loaded patches had antibacterial activity against the S. aureus, but for P. aeruginosa, more studies should be performed.

Electrospinning (ES) of gelatin often requires cytotoxic organic solvents or acidic environments, which deteriorate cell recognition sites. In this study, aqueous, non‐toxic, co‐solvent ES was performed to obtain core–shell poly(vinyl alcohol) (PVA)/gelatin nanofiber scaffolds. Effects of the core/shell feed rate ratio (FRR) were investigated on a morphological and mechanical basis. PVA:gelatin ratio of 1:4 was the limiting ratio for specific voltage and electrode distance parameters to obtain uniform fibers. Core–shell bead‐free structures were obtained at 8% PVA and gelatin aqueous solutions. A mean diameter of 280 nm was obtained for 1:1 FRR at 15 kV and 15 cm of electrode distance. Crosslinking resulted in slight improvement in tensile strengths and severe decrease in ductility. Fourier transform infrared spectra revealed retention and improvement of stable secondary structures of gelatin after ES. The scaffolds almost degraded more than 60% in 14 days. Based on the results, present scaffolds hold great promise as suitable candidates for biomedical applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46582.

Composites of calcinated bovine bone derived hydroxyapatite (BHA) doped 1 and 2 wt% MgF2 were prepared by a sintering process. Microstructure and crystallographic analyses along with measurements of density, compression strength, and microhardness were carried out in the produced samples. The experimental results indicated a beneficial effect of MgF2 in the matrix of BHA reflected in the significant increase of compression strength and microhardness up to 143 MPa and 313 HV, respectively, achieved after sintering at 1300 0C for 2% MgF2 addition. The presence of MgF2 reduced the onset of sintering towards lower temperatures (i.e. 1100 0C) and increased the stability of hydroxyapatite towards transformation to TCP at 1300 0C. The influence of Mg2+ and F- ions in the lattice of hydroxyapatite is discussed.

Objective: Intermittent hypoxia (IH) implementation is a method performed by intermittently decreasing oxygen concentration in inhaled air at specific rate. This method varies between studies in terms of its application. This study aims to examine the changes in Complete Blood Count (CBC) parameters caused by IH implementation at therapeutic dose ranges with a single model. Methods: Ten Sprague Dawley type adult male rats were divided into two groups. In the study group, FiO2 level of inhaled air, was reduced to 10% in hypoxic cycle. 5 minutes normoxia-hypoxia cycle was used in each 30 minutes experiment period for study group. Control group remained in normoxic air for 30 minutes. 1 cc of blood was taken from mandibular vein from all rats at the end of 6th day. CBC analyzes were performed and differences between two groups were investigated. Results: Significant differences were detected in some CBC parameters between the two groups. It was determined that significant increase in MONO (p<0.001), MONO% (p<0.001), MCH (p=0.03), PLT (p=0.013) and PCT (p=0.007) parameters and significant decrease in MPV (p=0.02 parameters, in favor of study group. Conclusion: IH implementation was caused significant changes in MONO, MONO%, MCH, PCT, PLT and MPV parameters in the CBC analysis of rats. Considering the study results, therapeutic IH implementation may thought to have important effects in terms of lung protection and regeneration. Further research may focus on this point for precising and supporting of this study’ results.