This paper presents the study of infrared (IR) reflow oven characteristics for suitable operating conditions of the flexible printed circuit board (FPCB) in the reflow soldering process. A computer-based model that imitates a real-time oven was developed with practical boundary conditions. Since the radiation effect is dominant in the reflow process, a discrete ordinate (DO) model was selected to simulate the effect. The experimental work acts as a benchmark and the reflow profile was set to follow the standards of JSTD-020E. The simulation of the model has a great consensus between the experimental data. It was found that the temperature distribution was inhomogeneous along with the phases. The FPCB surface also has a higher surface temperature than oven air during the operating reflow profile. An in-depth study using the simulation approach reveals that the temperature distribution of the desktop reflow oven is dependent on several factors, namely fan speed, FPCB position, and FPCB thickness. The rotational fan generates an unsteady flow that induces inhomogeneous temperature at different positions in the reflow oven cavity. The results are useful for studying further improvements to achieve temperature uniformity within the oven chamber.
Automation of various routine operations using the robotics arm in industrial automation is crucial for bridging innovative systems and production procedures, thereby speeding up the manufacturing process by reducing overall cycle times. In this work, Finite Element Method (FEM) is used to simulate a robotic arm for handling electronic printers to foster their transportation. The analysis considers different loads and materials which include AISI 304, cast carbon steel, aluminium alloy 1060, malleable cast iron and AISI 1020. The effects of discrete particulate mechanical properties, concerning material, load zone and design configuration parameters were revealed. The remarkable result of these simulations shows displacement, tensile and compressive strain distribution values as a conclusion of the better capacity for anticipated lightweight operation using aluminium alloy 1060 robotic arm transporting device. In addition, the current simulations give a profound picture of how materials are selected to maximize the operational process.