Oskar Ronan

Dr. Oskar Ronan

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 March 2023 in npj 2D Materials and Applications
Verified
Journal Article
Open access
PDF file
DTDaire Tyndall
Daire Tyndall
LGLee Gannon
Lee Gannon
LHLucia Hughes
Lucia Hughes
JCJulian Carolan
Julian Carolan
SPSergio Pinilla
Sergio Pinilla
MBMichelle Browne
Michelle Browne
Very recently, it has been reported that mixed transition metal oxide (TMO)/MXene catalysts show improved performance over TMO only catalysts for the oxygen evolution reaction (OER). However, the reasoning behind this observation is unknown. In this work mixed Co(OH)2/Ti3C2Txwere prepared and characterized for the OER using ex situ and operando spectroscopy techniques in order to initiate the understanding of why mixed TMO/MXene materials show better performances compared to TMO only catalysts. This work shows that the improved electrocatalysis for the composite material compared to the TMO only catalyst is due to the presence of higher Co oxide oxidation states at lower OER overpotentials for the mixed TMO/MXene catalysts. Furthermore, the presence of the MXene allows for a more mechanically robust film during OER, making the film more stable. Finally, our results show that small amounts of MXene are more advantageous for the OER during long-term stability measurements, which is linked to the formation of TiO2. The sensitivity of MXene oxidation ultimately limits TMO/MXene composites under alkaline OER conditions, meaning mass fractions must be carefully considered when designing such a catalyst to minimize the residual TiO2formed during its lifetime.

28 December 2022 in ACS Omega
Verified
Journal Article
Open access
OROskar Ronan
Oskar Ronan
ARAhin Roy
Ahin Roy
SRSean Ryan
Sean Ryan
LHLucia Hughes
Lucia Hughes
CDClive Downing
Clive Downing
VNValeria Nicolosi
Valeria Nicolosi
One of the weaknesses of silicon-based batteries is the rapid deterioration of the charge-storage capacity with increasing cycle numbers. Pure silicon anodes tend to suffer from poor cycling ability due to the pulverization of the crystal structure after repeated charge and discharge cycles. In this work, we present the synthesis of a hollow nanostructured SiO2 material for lithium-ion anode applications to counter this drawback. To improve the understanding of the synthesis route, the crucial synthesis step of removing the ZnO template core is shown using an in situ closed gas-cell sample holder for transmission electron microscopy. A direct visual observation of the removal of the ZnO template from the SiO2 shell is yet to be reported in the literature and is a critical step in understanding the mechanism by which these hollow nanostructures form from their core-shell precursors for future electrode material design. Using this unique technique, observation of dynamic phenomena at the individual particle scale is possible with simultaneous heating in a reactive gas environment. The electrochemical benefits of the hollow morphology are demonstrated with exceptional cycling performance, with capacity increasing with subsequent charge-discharge cycles. This demonstrates the criticality of nanostructured battery materials for the development of next-generation Li+-ion batteries.

29 June 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
NTNicola Taurisano
Nicola Taurisano
GBGianluca Bravetti
Gianluca Bravetti
SCSonia Carallo
Sonia Carallo
MLMeiying Liang
Meiying Liang
OROskar Ronan
Oskar Ronan
Aurora RizzoAurora Rizzo
Aurora Rizzo
Organic–inorganic hybrid perovskite materials have raised great interest in recent years due to their excellent optoelectronic properties, which promise stunning improvements in photovoltaic technologies. Moreover, two-dimensional layered materials such as graphene, its derivatives, and transition metal dichalcogenides have been extensively investigated for a wide range of electronic and optoelectronic applications and have recently shown a synergistic effect in combination with hybrid perovskite materials. Here, we report on the inclusion of liquid-phase exfoliated molybdenum disulfide nanosheets into different perovskite precursor solutions, exploring their influence on final device performance. We compared the effect of such additives upon the growth of diverse perovskites, namely CH3NH3PbI3 (MAPbI3) and triple-cation with mixed halides Csx (MA0.17FA0.83)(1−x)Pb (I0.83Br0.17)3 perovskite. We show how for the referential MAPbI3 materials the addition of the MoS2 additive leads to the formation of larger, highly crystalline grains, which result in a remarkable 15% relative improvement in power conversion efficiency. On the other hand, for the mixed cation–halide perovskite no improvements were observed, confirming that the nucleation process for the two materials is differently influenced by the presence of MoS2.

1 February 2022 in Open Research Europe
Verified
Journal Article
Open access
OROskar Ronan
Oskar Ronan
CDClive Downing
Clive Downing
VNValeria Nicolosi
Valeria Nicolosi
Lithium-sulfur battery is one of promising candidates for next-generation energy storage device due to the sulfur cathode material with low cost and nontoxicity, and high theoretical energy density (nearly 2600Wh kg −1) and specific energy (2567Wh kg −1). Sulphur, however, poses a few interesting challenges before it can gain widespread utilisation. The biggest issue is known as the polysulphide shuttling effect which contributes to rapid capacity loss after cycling. Accurate characterisation of sulphur cathodic materials becomes critical to our understanding polysulphide shuttling effect in the quest of finding mitigating solutions. Electron microscopy is playing a crucial role in battery research in determining structure–property–function relations. However, sulphur undergoes sublimation at a point above the typical pressures found in the column of a transmission electron microscope (TEM) at room temperature. This makes the imaging and characterisation of any sort of nanostructured sulphur samples challenging, as the material will be modified or even disappear rapidly as soon as it is inserted into the TEM vacuum. As a result, materials characterised by such methods are prone to deviation from normal conditions to a great extent. To prevent this, a novel method of encapsulating sulphur particles between silicon nitride (SiN x) membranes is demonstrated in this work.

4 January 2022 in Open Research Europe
Verified
Journal Article
Open access
OROskar Ronan
Oskar Ronan
CDClive Downing
Clive Downing
VNValeria Nicolosi
Valeria Nicolosi
Lithium-sulfur battery is one of promising candidates for next-generation energy storage device due to the sulfur cathode material with low cost and nontoxicity, and super high theoretical energy density (nearly 2600Wh kg −1) and specific energy (2567Wh kg −1). Sulphur, however, poses a few interesting challenges before it can gain widespread utilisation. The biggest issue is known as the polysulphide shuttling effect which contributes to rapid capacity loss after cycling. Accurate characterisation of sulphur cathodic materials becomes critical to our understanding polysulphide shuttling effect in the quest of finding mitigating solutions. Electron microscopy is playing a crucial role in battery research in determining structure–property–function relations. However, sulphur undergoes sublimation at a point above the typical pressures found in the column of a transmission electron microscope (TEM) at room temperature. This makes the imaging and characterisation of any sort of nanostructured sulphur samples challenging, as the material will be modified or even disappear rapidly as soon as it is inserted into the TEM vacuum. As a result, materials characterised by such methods are prone to deviation from normal conditions to a great extent. To prevent this, a novel method of encapsulating sulphur particles between silicon nitride (SiN x) membranes is demonstrated in this work.