This paper presents an adjoint-based shape optimization framework and its demonstration in a conjugate heat transfer problem in a turbine blading. The gradient of the objective function is computed based on the continuous adjoint method, which also includes the adjoint to the turbulence model. Differences in the gradient resulting from making the frozen turbulence assumption are discussed. The developed software was used to optimize both the blade shape of the internally cooled linear C3X turbine blade and the position of cooling channels aiming at (a) minimum total pressure drop of the hot gas flow and (b) minimum highest temperature within the blade. A two-step optimization procedure was used. A free-form parameterization tool, based on volumetric NURBS, controls the blade airfoil contour, while the cooling channels are free to move following changes in the coordinates of their centers. Geometric and flow constraints are included in the performed optimizations, keeping the cooling channels away from the airfoil sides and retaining the turbine inlet capacity and flow turning.
17 February 2023 in International Journal for Numerical Methods in Fluids
This work presents a novel volumetric parameterization technique along with the continuous adjoint method to support gradient‐based CFD shape optimization of turbomachinery stages. The proposed parameterization retains axisymmetry and periodicity by acting on a transformed coordinate system. The same volumetric model controls the shape and the computational volume mesh in a seamless manner, avoiding the additional use of a mesh deformation tool. Moreover, it is differentiated to compute mesh sensitivities (i.e., derivatives of nodal coordinates with respect to the design variables) and is combined with the flow and continuous adjoint, multi‐row solvers of the in‐house PUMA software. Flow field solutions in successive rows communicate based on the mixing plane approach; the development of continuous adjoint to the latter is also presented in this article. The adjoint to the turbulence model and distance‐from‐the‐wall (Hamilton–Jacobi) equations are solved, increasing the accuracy of the computed sensitivity derivatives. All these tools run on modern GPUs, accelerating both flow/adjoint solutions and shape/mesh manipulations. The capabilities of these tools are demonstrated in the shape optimization of the rotor blades of the MT1 high‐pressure, transonic, turbine stage, aiming at maximum stage isentropic efficiency with constraints on stage reaction and inlet capacity.
This article presents single- and multi-disciplinary shape optimizations of a generic business jet wing at two transonic cruise flow conditions. The studies performed are based on two high-fidelity gradient-based optimization tools, assisted by the adjoint method (following both discrete and continuous approaches). Single discipline and coupled multi-disciplinary sensitivity derivatives computed from the two tools are compared and verified against finite differences. The importance of not making the frozen turbulence assumption in adjoint-based optimization is demonstrated. Then, a number of optimization runs, ranging from a pure aerodynamic with a rigid structure to an aerostructural one exploring the trade-offs between the involved disciplines, are presented and discussed. The middle-ground scenario of optimizing the wing with aerodynamic criteria and, then, performing an aerostructural trimming is also investigated.
14 March 2021 in Neural Computing and Applications
A continuous adjoint-based aeroacoustic optimization, based on a hybrid model including the Ffowcs Williams–Hawkings (FW–H) acoustic analogy, to account for the multidisciplinary design of aero-engine intakes with an axisymmetric geometry, is presented. To optimize such an intake, the generatrix of its lips is parameterized using B-Splines, and the energy contained in the sound pressure spectrum, at the blade passing frequency at receivers located axisymmetrically around the axis of the engine, is minimized. The engine is not included in the optimization and manifests its presence through an independently computed time-series of static pressure over the annular boundary of the simulation domain that corresponds to the inlet to the fan. Taking advantage of the case axisymmetry, the steady 3D RANS equations are solved in the rotating frame of reference and post-processed to compute the flow quantities’ time-series required by the FW–H analogy. The numerical solution of the unsteady flow equations and the otherwise excessive overall cost of the optimization are, thus, avoided. The objective function gradient is computed using the continuous adjoint method, coupled with the analytical differentiation of the FW–H analogy. The adjoint equations are also solved in the rotating frame via steady solver.