This paper presents an adjoint-based shape optimization framework and its demonstration in a conjugate heat transfer problem in a turbine blading. The gradient of the objective function is computed based on the continuous adjoint method, which also includes the adjoint to the turbulence model. Differences in the gradient resulting from making the frozen turbulence assumption are discussed. The developed software was used to optimize both the blade shape of the internally cooled linear C3X turbine blade and the position of cooling channels aiming at (a) minimum total pressure drop of the hot gas flow and (b) minimum highest temperature within the blade. A two-step optimization procedure was used. A free-form parameterization tool, based on volumetric NURBS, controls the blade airfoil contour, while the cooling channels are free to move following changes in the coordinates of their centers. Geometric and flow constraints are included in the performed optimizations, keeping the cooling channels away from the airfoil sides and retaining the turbine inlet capacity and flow turning.
This paper investigates the adequacy of radial basis function (RBF)-based models as surrogates in uncertainty quantification (UQ) and CFD shape optimization; for the latter, problems with and without uncertainties are considered. In UQ, these are used to support the Monte Carlo, as well as, the non-intrusive, Gauss Quadrature and regression-based polynomial chaos expansion methods. They are applied to the flow around an isolated airfoil and a wing to quantify uncertainties associated with the constants of the transition model and the surface roughness (in the 3D case); it is demonstrated that the use of the RBF-based surrogates leads to an up to 50% reduction in computational cost, compared with the same UQ method that uses CFD computations. In shape optimization under uncertainties, solved by stochastic search methods, RBF-based surrogates are used to compute statistical moments of the objective function. In applications with geometric uncertainties which are modeled through the Karhunen–Loève technique, the use on an RBF-based surrogate reduces the turnaround time of an evolutionary algorithm by orders of magnitude. In this type of applications, RBF networks are also used to perform mesh displacement for the perturbed geometries.