In this paper, the continuous adjoint method is used for the optimization of a static mixing device. The CFD model used is suitable for the flow simulation of the two miscible fluids that enter the device. The formulation of the adjoint equations, which allow the computation of the sensitivity derivatives is briefly demonstrated. A detailed analysis of the geometry parameterization is presented and a set of different parameterization scenarios are investigated. In detail, two different parameterizations are combined into a two-stage optimization algorithm which targets maximum mixture uniformity at the exit of the mixer and minimum total pressure losses. All parameterizations are in conformity with specific manufacturability constraints of the final shape. The non-dominated front of optimal solutions is obtained by using the weighted sum of the two objective functions and executing a set of optimization runs. The effectiveness of the proposed synthetic parameterization schemes is assessed and discussed in detail. Finally, a reduced length mixer is optimized to study the impact of the length of the tube on the device’s performance.
This paper presents an adjoint-based shape optimization framework and its demonstration in a conjugate heat transfer problem in a turbine blading. The gradient of the objective function is computed based on the continuous adjoint method, which also includes the adjoint to the turbulence model. Differences in the gradient resulting from making the frozen turbulence assumption are discussed. The developed software was used to optimize both the blade shape of the internally cooled linear C3X turbine blade and the position of cooling channels aiming at (a) minimum total pressure drop of the hot gas flow and (b) minimum highest temperature within the blade. A two-step optimization procedure was used. A free-form parameterization tool, based on volumetric NURBS, controls the blade airfoil contour, while the cooling channels are free to move following changes in the coordinates of their centers. Geometric and flow constraints are included in the performed optimizations, keeping the cooling channels away from the airfoil sides and retaining the turbine inlet capacity and flow turning.
This paper investigates the adequacy of radial basis function (RBF)-based models as surrogates in uncertainty quantification (UQ) and CFD shape optimization; for the latter, problems with and without uncertainties are considered. In UQ, these are used to support the Monte Carlo, as well as, the non-intrusive, Gauss Quadrature and regression-based polynomial chaos expansion methods. They are applied to the flow around an isolated airfoil and a wing to quantify uncertainties associated with the constants of the transition model and the surface roughness (in the 3D case); it is demonstrated that the use of the RBF-based surrogates leads to an up to 50% reduction in computational cost, compared with the same UQ method that uses CFD computations. In shape optimization under uncertainties, solved by stochastic search methods, RBF-based surrogates are used to compute statistical moments of the objective function. In applications with geometric uncertainties which are modeled through the Karhunen–Loève technique, the use on an RBF-based surrogate reduces the turnaround time of an evolutionary algorithm by orders of magnitude. In this type of applications, RBF networks are also used to perform mesh displacement for the perturbed geometries.
This paper presents a topology optimization (TopO) method for conjugate heat transfer (CHT), with turbulent flows. Topological changes are controlled by an artificial material distribution field (design variables), defined at the cells of a background grid and used to distinguish a fluid from a solid material. To effectively solve the CHT problem, it is crucial to impose exact boundary conditions at the computed fluid–solid interface (FSI); this is the purpose of introducing the cut-cell method. On the grid, including also cut cells, the incompressible Navier–Stokes equations, coupled with the Spalart–Allmaras turbulence model with wall functions, and the temperature equation are solved. The continuous adjoint method computes the derivatives of the objective function(s) and constraints with respect to the material distribution field, starting from the computation of derivatives with respect to the positions of nodes on the FSI and then applying the chain rule of differentiation. In this work, the continuous adjoint PDEs are discretized using schemes that are consistent with the primal discretization, and this will be referred to as the “Think Discrete–Do Continuous” (TDDC) adjoint. The accuracy of the gradient computed by the TDDC adjoint is verified and the proposed method is assessed in the optimization of two 2D cases, both in turbulent flow conditions. The performance of the TopO designs is investigated in terms of the number of required refinement steps per optimization cycle, the Reynolds number of the flow, and the maximum allowed power dissipation. To illustrate the benefits of the proposed method, the first case is also optimized using a density-based TopO that imposes Brinkman penalization terms in solid areas, and comparisons are made.