This study assessed the influence of CAD/CAM milling and 3D-printing fabrication methods on mechanical properties of 3-unit interim fixed dental prosthesis (IFDPs) after thermo-mechanical aging. Forty 3-unit IFDPs were fabricated on a mandibular right second premolar and second molar of a typodont cast. Samples were fabricated from the following materials; auto-polymerized polymethyl methacrylate (conventional resin), CAD/CAM PMMA (milled resin) and two different CAD/CAM 3D-printed composite resins; digital light processing Asiga (DLP AS) and stereolithography NextDent (SLA ND). Mechanical properties were compared between the studied materials using Kruskal–Wallis test, followed by multiple pairwise comparisons using Bonferroni adjusted significance. There was a significant difference in flexural strength and microhardness between the studied materials (p < 0.001), with the highest mean ± SD reported in the milled IFDPs (174.42 ± 3.39, 27.13 ± 0.52), and the lowest in the conventional IFDPs (98.02 ± 6.1, 15.77 ± 0.32). Flexural strengths differed significantly between the conventional IFDPs and all materials except DLP AS. The highest elastic modulus was recorded in the milled group, and the lowest in the SLA ND group (p = 0.02). In conclusion, superior flexural strength, elastic modulus, and hardness were reported for milled IFDPs. SLA ND printed IFDPs showed comparable mechanical properties to milled ones except for the elastic modulus.

Background: Dental appearance affects facial beauty, social interaction and psychological well-being particularly among adolescents. The aim of the current study was to determine factors affecting adolescent dental self-confidence and satisfaction with dental appearance in Saudi Arabia. Methods: A cross-sectional study was conducted in the Eastern Province of Saudi Arabia among 3500 students attending intermediate and high schools. Data was collected from 2637 students using the translated Arabic version of the psychosocial impact of dental esthetics questionnaire (PIDAQ) in addition to questions about smile esthetics satisfaction and demographic variables including; gender, age, school grade, and parental level of education. Statistical analysis was performed by using logistic regression to assess the effect of demographical variables on PIDAQ and its domains at 5% significance level. Results: About 80% of the participants were satisfied or somewhat satisfied with their smiles. Tooth alignment and tooth color were the most cited reasons for adolescents’ dissatisfaction about their smile, 34% and 33% respectively. Females and participants’ fathers’ university education figured in a statistically significant way regarding higher PIDAQ and aesthetic concerns. Females were 70%, and those with fathers’ university education were 22% more likely to have a negative psychological impact. Females expressed aesthetic concerns nearly two times more than males. Participants whose fathers possessed university education had an aesthetic concern 1.25 times more compared to those whose fathers had no school or limited school education. Females and those with mothers who had university education were less likely to have positive dental self-confidence. Conclusions: Most adolescents exhibited satisfaction with their own smiles. Smile dissatisfaction in the remaining participants was related to teeth alignment, color and shape. Females were more concerned with dental esthetics and smile satisfaction than males. Females and participants whose fathers had a university education exhibited higher psychosocial impact than males and those with or without school education. However, males showed greater self-confidence in their dental aesthetics.

Parental attitudes toward the importance of oral hygiene have an impact on the formation of their children’s oral habits and the prevalence of oral diseases. Our aim was to assess the association between parents’ education and socioeconomic status and their children’s oral health. A cross-sectional study was conducted between the years of 2018 and 2020 in the eastern province of Saudi Arabia among primary school children. Two pre-calibrated dentists performed the clinical examination of the children, and a self-administered validated questionnaire was obtained from their parents. Clinical examination was performed on 589 children with an age range of 3 to 14 years, where 47% were males and 53% were females, 70% with dental caries. Both parents with higher education and a high monthly income were significantly associated with lower prevalence of decayed teeth in their children, respectively. Mother’s education, age, gender and application of sealant were found significantly associated with the high prevalence of caries. High prevalence of tooth decay was reported among school children in the eastern province of Saudi Arabia. A high educational level of parents and high income were correlated with a lower prevalence of decayed teeth, similarly to the situation in the case of presence of medical insurance.

Candida albicans is the main causative pathogen of denture stomatitis, which affects many complete denture patients. Objective: To evaluate the effect of different concentrations of nanodiamonds (NDs) added to polymethyl methacrylate (PMMA) denture base material on Candida albicans adhesion as well as on surface roughness and contact angle. Methodology: Acrylic resin specimens sized 10×10×3 mm³ were prepared and divided into four groups (n=30) according to ND concentration (0%, 0.5%, 1%, 1.5% by wt). Surface roughness was measured with a profilometer, and the contact angle with a goniometer. The effect of NDs on Candida albicans adhesion was evaluated using two methods: 1) slide count and 2) direct culture test. Analysis of variance (ANOVA) and Tukey's post hoc test were used in the statistical analyses. Results: Addition of NDs decreased the Candida albicans count significantly more than in the control group (p<0.05), with a lowest of 1% NDs. Addition of NDs also significantly decreased the surface roughness (p<0.05), but the contact angle remained the same. Incorporation of NDs into the PMMA denture base material effectively reduced Candida albicans adhesion and decreased surface roughness. Conclusion: PMMA/NDs composites could be valuable in the prevention of denture stomatitis, which is considered one of the most common clinical problems among removable denture wearers.

An online survey was conducted to identify factors associated with financial insecurity, food insecurity and poor quality of daily lives of adults in Nigeria during the first wave of the COVID-19 pandemic. The associations between the outcome (experience of financial loss, changes in food intake and impact of the pandemic on daily lives) and the explanatory (age, sex, education level, anxiety, depression, HIV status) variables were determined using logistic regression analysis. Of the 4439 respondents, 2487 (56.0%) were financially insecure, 907 (20.4%) decreased food intake and 4029 (90.8%) had their daily life negatively impacted. Males (AOR:0.84), people who felt depressed (AOR:0.62) and people living with HIV -PLHIV- (AOR:0.70) had significantly lower odds of financial insecurity. Older respondents (AOR:1.01) had significantly higher odds of financial insecurity. Those depressed (AOR:0.62) and PLHIV (AOR:0.55) had significantly lower odds of reporting decreased food intake. Respondents who felt anxious (AOR:0.07), depressed (AOR: 0.48) and who were PLHIV (AOR:0.68) had significantly lower odds of reporting a negative impact of the pandemic on their daily lives. We concluded the study findings may reflect a complex relationship between financial insecurity, food insecurity, poor quality of life, mental health, and socioeconomic status of adults living in Nigeria during the COVID-19 pandemic.