The critical state theory is a robust conceptual framework for the characterisation of soil behaviour. In the laboratory, triaxial tests are used to assess the critical state locus. In the last decades, the equipment and testing procedures for soil characterisation, within the critical state framework, have advanced to obtain accurate and reliable results. This review paper summarises and describes a series of recommended laboratory procedures to assess the critical state locus in cohesionless soils. For this purpose, results obtained in the laboratory from different cohesionless soils and triaxial equipment configurations are compiled, analysed and discussed in detail. The procedures presented in this paper reinforce the use of triaxial cells with lubricated end platens and an embedded connection piston into the top-cap, together with the verification of the full saturation condition and the measurement end-of-test water content—preferable using the soil freezing technique. The experimental evidence and comparison between equipment configurations provide relevant insights about the laboratory procedures for obtaining a reliable characterisation of the critical state locus of cohesionless geomaterials. All the procedures recommended herein can be easily implemented in academic and commercial geotechnical laboratories.

Dam B1 was approximately 85 m high and 700 m long along the crown when it suddenly failed in 25th of January, after 41 years of operations and deposition of tailings at the Paraopeba mining complex (Côrrego de Feijão), in Minas Gerais, Brazil. More than 250 people died and vast economic, social and environmental damages resulted from the collapse. Given the need to geotechnically characterise the tailings within the dam for a credible computational model of the failure, an extensive sampling and laboratory testing campaign took place. The geotechnical laboratory of the Civil Engineering Department at the Faculty of Engineering of the University of Porto (Portugal) was invited by CIMNE, under a contract with VALE, with MPF agreement, to conduct this program. This paper will present a description of the sampling campaigns in the remaining post-mortem dam/reservoir tailings were the failure instability mechanics developed and the experimental program undertaken to test the tailings in advanced laboratory tests. The results that embrace evaluations of the physical, hydraulic and mechanical properties, deduced from integral samples selectively collected and prepared as described, which allowed to define the geotechnical parameters necessary for the referred analyses are here resumed.