To obtain a kind of superhydrophobic sponge with high oil and water selectivity, the MS/TiO2/PDMS sponge was prepared via a two-step hydrophobic fabrication based on the melamine sponge (MS), tetrabutyl titanate (TBOT), and polydimethylsiloxane (PDMS). The effects of modification time, the concentrations of TBOT and PDMS on the properties of the MS/TiO2/PDMS sponge were studied, and the separation mechanism was also discussed based on the interaction between the oil and the surface of the MS/TiO2/PDMS sponge. The results suggest that under optimal conditions, the MS/TiO2/PDMS sponge show superhydrophobicity. The contact angle and adsorption capacity for oil of the MS/TiO2/PDMS sponge are 149.2° and 98.5 g·g−1, respectively, and they can be recycled for about 25 cycles after oil–water separation test. This study prepares a new composite material with high oil–water selectivity, which is a good foundation for the development and research of new oil adsorbents.
Zn–air batteries have garnered significant interest due to their high capacity, economical cost, and eco-friendly nature. The pursuit of non-noble metal cathode catalysts that offer high activity, exceptional durability, and cost-efficiency as alternatives to noble metal platinum is a prominent research focus. In this investigation, a nitrogen-doped carbon material predominantly constituted of pyridinic nitrogen and graphitic nitrogen was synthesized utilizing the polymer of hexaaminobenzene and hexaketocyclohexane as precursors. In a 0.1 M KOH electrolyte, this catalyst demonstrated ORR catalytic activity on par with commercial Pt/C and showcased enhanced stability compared to Pt/C. When incorporated as a cathode catalyst in a zinc–air battery, the battery exhibited stable discharge for 95 hours at a current density of 5 mA cm−2, achieving a specific capacity as high as 730 mA h g−1. Its discharge efficacy remained consistent even following multiple replacements of the anode zinc plate, facilitating the repeated use of the zinc–air battery. This research underpins the technical foundation and theoretical framework for the advancement of novel carbon-based catalysts characterized by straightforward production techniques, affordability, and superior activity and resilience.
P(NIPAM-co-AA)/CuS composite microspheres with zigzag patterned surfaces were synthesized, and a mechanism for “the deformed shrinkage of the surface texture” was proposed. The surface morphology is sensitive to factors such as Ksp, pH, temperature, deposition amount, etc.
To overcome the problems of frequent leakage accidents during oil exploitation, a superhydrophobic and superoleophilic porous MS/PDA/DT sponge was successfully prepared via mild solvent evaporation method, and a polydopamine assisted surface coating of 1-dodecanethiol (DT) on a melamine sponge (MS) substrate. Surface structure and performance of the MS/PDA/DT sponge were characterized by Scanning Electron Microscope (SEM), Fourier transform infrared spectrometer (FTIR), and Video Optical Contact Angle (CA) metre. The results showed that the as-prepared MS/PDA/DT sponge has a high-water contact angle (WCA) of 147.2°, which is probably attributed to both the rough surface derived from in situ growth and the low surface energy due to grafting of hydrophobic 1-dodecanethiol. The durability of the as-constructed MS/PDA/DT sponge was studied by repeated abrasion tests. After 50 abrasion cycles, the superhydrophobicity of the MS/PDA/DT sponge good mechanical durability. The MS/PDA/DT sponge can effectively absorb oil with an absorption capacity of up to 24 times its weight. The superhydrophobic and superoleophilic MS/PDA/DT sponge has the potential as a promising adsorbent for oil/water separation. GRAPHICAL ABSTRACT
To improve the mechanical and tribological properties of bismaleimide (BMI) resin, a novel Si-containing benzoxazine (Si-BOZ) monomer was synthesized using a solvent process and N-(2-aminoethyl)-3-aminopropyltrimethoxysilane as a silane coupling agent. The novel Si-BOZ monomer was subsequently blended with BMI to prepare Si-BOZ/BMI polymer alloys. Furthermore, the effect of Si-BOZ content on the mechanical, tribological, and thermal properties of Si-BOZ/BMI alloys was investigated. The results revealed that the addition of Si-BOZ to BMI improved the mechanical properties and wear resistance of Si-BOZ/BMI; moreover, the glass transition temperature of cured Si-BOZ/BMI alloys was lower than that of pure BMI resin. These results confirmed that the increase in wear resistance of Si-BOZ/BMI alloys can be attributed to the increase in thermal resistance and improvement in mechanical performance owing to the addition of Si-BOZ.
With the gradual miniaturization of electronic devices, the thermal conductivity of electronic components is increasingly required. Epoxy (EP) resins are easy to process, exhibit excellent electrical insulation properties, and are light in weight and low in cost, making them the preferred material for thermal management applications. In order to endow EPs with better dielectric and thermal conductivity properties, bromo-oxygen-bismuth (BiOBr) prepared using the hydrothermal method was used as a filler to obtain BiOBr/EP composites, and the effect of BiOBr addition on the properties of the BiOBr/EP composites was also studied. The results showed that the addition of a small amount of BiOBr could greatly optimize the dielectric properties and thermal conductivity of EP resin, and when the content of BiOBr was 0.75 wt% and 1.00 wt%, the dielectric properties and thermal conductivity of the composite could reach the optimum, respectively. The high dielectric constant and excellent thermal conductivity of BiOBr/EP composites are mainly due to the good layered structure of BiOBr, which can provide good interfacial polarization and thermal conductivity.